◀ Kim Ji-woon’s site Wikipedia ▶
How to read DIY is DO IT YOUR SELF, and in Korean, the abbreviation for DIY is Do It Yourself.
Our World Building Materials DIY is a woodworking DIY shopping mall site that sells wood and wood DIY furniture materials.
We are giving you tips to help you make DIY furniture easily with a drill and pieces.
There is no separate DIY furniture brand and we are suggesting how to make it.
We also provide DIY kit products for simple assembly.
Please refer to the Internet furniture-making workshop World Building Materials DIY to make good products.
We suggest how to make furniture by uploading it as a video.
Internet Furniture DIY World Building Materials and we all DIY
◀ Kim Ji-woon’s site Wikipedia ▶
How to read DIY is DO IT YOUR SELF, and in Korean, the abbreviation for DIY is Do It Yourself.
Our World Building Materials DIY is a woodworking DIY shopping mall site that sells wood and wood DIY furniture materials.
We are giving you tips to help you make DIY furniture easily with a drill and pieces.
There is no separate DIY furniture brand and we are suggesting how to make it.
We also provide DIY kit products for simple assembly.
Please refer to the Internet furniture-making workshop World Building Materials DIY to make good products.
We suggest how to make furniture by uploading it as a video.
Internet Furniture DIY World Building Materials and we all DIY
◀ Ji-woon Kim, CEO of World Building Materials ▶
Hello. This is Ji-woon Kim, CEO of World Building Materials.
This is a red pine two-step ladder made of laminated boards.
If you look at work at home
If the ladder is too big, storage is difficult.
It's so small that I can't reach it, and because of these things,
This is a prop that we created by measuring the size as much as possible.
The species of red pine is a member of the red pine family.
It is characterized by large and pointed knots.
As time passes, red pine turns red.
If you look here, a groove is dug using a jigsaw machine and the cut out pillars are attached.
It is joined with a piece at the bottom.
It is a highly difficult prop because you have to pay attention to each angle to make it.
When the tree comes out and supports
This is a prop that compensates for this because it does not receive much power and takes up space.
Pieces are also included below.
When fixing this top, I took care of it.
I joined the pieces where the grooves were made.
And if you look at the top plate, you can't see any traces of the pieces.
But if you look closely, you can see the white color.
This is done by drilling a hole and attaching it using a thin wooden dowel.
It is a form in which bond is injected and the wooden beam is cut.
That's why this part was sanded without any traces.
It's a ladder, so you can't be weak.
That's why we reinforced it and joined the pieces on all four sides.
This is a prop that emphasizes sturdiness.
Let me explain the size.
The size I always say is
If there is a total area, it is created to fit that area.
If you want to do the content we mentioned, the best way is to refer to the size.
First, I will explain the first step ladder in front of you.
The length is 500mm and the width is 120mm.
This is a product with 30 44 grooves dug.
You have to dig both sides like this.
You can think of it as digging at 30mm or 40mm in the shape of a square.
I will explain from the top panel.
In the case of the top plate, the width is 210mm.
length is 450mm
I explained the size of the two plates, but these legs are the most important.
In the case of legs, you need to make the first layer first and then move on to the second layer.
In the case of height, I will tell you the height of the first stage, and I will tell you the height up to the laminated board.
height is 260mm
And the second stage height is 490mm from the floor.
This is how we made a two-step staircase.
You can make it like this, or add reinforcement.
It's good to have strong legs to withstand the load.
That's why I think it would be a good idea to reinforce it like we did and use it.
I think it would be stronger if the legs were reinforced a little more.
In terms of design, it feels a bit thin, but you can reinforce it by making the piece a little thicker.
I think it can withstand a lot of load.
#woodworking #diy #furniture #wooden