"I'm not abandoning this project, it's 90-95% done" - story of my life lol

The sirens kicking in at the jumpcut at 9:39 made it look like you ran into trouble offscreen then started running away. 😂

A railroad guy told me years ago you can tell how often a track is used by the amount of rust on top of rail. Happy railroading

This is great. I was on a handcar once at the Elgin Trolly Museum. A few suggestions from what it was like: the A-frame could be taller so you're not breaking your back, and if you pumped at the same speed on an old one you'd go about 3 times faster (larger gear on your bike crank). Love the brakes; that's exactly what they were!

Awesome project mate, very American style hand car, the ones we have here in New Zealand a different in that you sit down and the hand lever works side to side instead of up and down, allows for greater leverage and user comfort. have done many rail trips on them, often days before the lines were ripped up. sadly there is no publicly accessible abandoned railway tracks here, they scrap them, and if you were caught doing this on any of the other tracks its a $20k fine. you will find steel axles much better and i would also add a chain tentioner or idler wheel, as chain tention will be why it goes better in one direction than the other, as sprockets dont like being fed slack chain. Enjoy all your projects mate and wish i could join in with most of them.

I came for the satellites, I stayed for this! Love it!

I really enjoyed seeing you getting back out on the rails again. I see you have taken a more ‘serious’ approach to safety and allowed Donny to conduct a thorough assessment before giving you the okay to continue as well…thank you for the latest adventure Gabe, looking forward to seeing what you have planned over the remainder of the summer time and further on. Best wishes

It's weird how much I love your channel. It's not my usual experience. Thanks.

These pump cars are fun, I recall as a kid we went to some railroad museum that let you ride one for 100 feet or so. Would be cool to go for miles, maybe with a small assist motor once you get it up to speed.

Yes!! Your railbike videos are what introduced me to your content. BTW if you ever need any specialty tools or even some machining done, feel free to reach out to me. We actually live in the same neighborhood!

I'd love to see this as a little electric speeder you can use to explore some super cool abandoned railways... perhaps it could also be made to have changeable gauge too so you could run it on abandoned standard and narrow gauge rails. Love this project!

you are living the American dream!

this guy is incredible

Cool wheels and prototype! I've never heard a pillow block be called a penguin bearing before. :p Maybe you can get away with an extra one supporting the axle next to the gear? Or whatever random bearing that will fit in there to pull against should help some. Great work!

I love your track vehicles, man. Looking forward to next stage on this. Thanks for your videos.

OOOOOH! COOL! Lets go be the boxcar children!

I'm glad you pre-emptively fitted a belt drive pulley wheel. You're going to get bored pretty quickly of hand-cranking, head down,, so you don't miss the stroke and crunch your arms / levers. Letting a little put-put two stroke take care of business while you sit back and enjoy the view seems far more the way, if you're going to go places on this rig, with those pro-level wheels. OR, turn it into a recumbent cycle powered dingus.

You making my child dream ❤ Love your videos

Love this channel. Just discovered it and the sat stuff just blows my tiny mind

My kind of video! A mechanical build, Donny and a Ma and Pa Kettle reference...

every video you post makes me say "this guy..." in the BEST way possible. keep it up.

Honestly you are uploading so much you can drop the "wecome back to the save it for parts channel." I never left XD.

Montage!!!! I can't remember if I found this place because of Sandland or the railcars, but thanks again.

Love it that there is such a thing as a pump handcar community; absolutely riveting and inspiring.

I wish there were some long abandoned stretches of railroad too here in the south of Germany

Your rail riding videos are what introduced me to your channel, i thought it was really neat what you were doing and yeah, i'm still here lol

now THIS is classic Saveitforparts!

i have inspected a real, old handcar. they are normally using a chain and a special mechanical construction beneat the car to do the racheting actions.

I think I saw some fairly new power tools here. 🤔 Nice brake system.

_Techno build montage!_

You have a interesting wide range of hobbies. Nice handcar, perhaps the deck should be a little longer in case you get carried away pumping the handcar too fast

Man, your stock of parts to build from is glorious, it lives up to the name off your channel.

Every time I watch one of your railway escapades I think of ways to tweak the project. Put in chain derailleur system like a ten-speed bike? Use a small engine from a lawn mower and gear it down for torque? LED ground effect lighting? Cool stuff.

Props to cameraman

I'm happy the algo recommended this channel. So much variety of interesting stuff! Thanks!

Good job. Now a seat and a motor and you will be golden.

So Awesome! Thanks for sharing! Can't wait for more video's and updates!!! :)

Needs steel axles and a support bearing in the middle of the axle next to the sprocket to resist bending from the chain tension when pumping. With the large wheels there is a lot of room under the deck, you could make a hybrid power rail car with a motor and batteries with pump backup. Some kind of clutch to avoid back driving the motor when pumping would be useful.

Very interesting video. Btw...Train wheel riding surfaces have to be conical to be able to negotiate curves. Thanks saveitforparts.

Your channel and Practical Engineering and my buddy Randy,a civil engineer,are my favorite engineers.

You need to get the freewheel off that bike for it too. Let it coast when you're not pumping.

Great video! Your railroad videos are personal favorites of mine (I love abandoned railroad tracks). I'm not good with my hands at all, so seeing you work hard at all these rail carts impresses me so much.

My favorite Minnesota KZfaqr!

This was an excellent build even if it didn't come out perfect on the first try. Never knew these were even a thing so thanks for sharing!

I love that you have a leash on your kitty 😺

i randomly decided to read the Dark Tower Stephen King books for the first time and right off the bat The Gunslinger has a railcar in it, even though it takes someone from a different universe to tell the guy what it is...

amazing stuff you are making

I enjoy the ghetto science put into it. I love the show.

Man jerry ringed or not this is more then most people accomplished in a year it does look awesome btw keep up what your doing your now the only reason I have KZfaq

From tunnels to Railroads Gabe is at it again!

This is far better built than the submarine

I gotta tell you, you impress the hell out of me seem like a really good guy and you love tinkering like I do. I like figuring things out but I don't have your skills. Loved the video.

Gotta put a track sander on that bad boy

Why do I have to think about Rich Evans, when I see your videos? ;) Anyway - great, as usual - thank you very much and greetings from Germany! :)

Your level of jank is super-impressive. Absolutely love your channel and every single piece of content!!!

Cool stuff buddy! Keep going 💯👀

pretty cool man thanks for the vid!

Great video. Looks like a lot of fun 😊

yay

Your dedication never ceases to amaze me. This thing is awesome!

A very historical concept, it's a beginning. I'm curious to see how it progresses.

I love your Rail Kart Videos! I have a NEW Set of those Wheels and matching Stainless Steel Axles from Rail Riders that are just waiting for my build. Like you, too many projects and.... I'm worried about finding a "Closed" Rail that has NOT been torn up to make a Rails to Trails! How do you suggest a Minnesotan find Rail to ride? Legal Disclaimer not needed!!! ;-)

I just stumbled across your channel. Pretty cool!

Love the looks of those hand cars. Looks like a fun way to excercise. It would be funny (and awesome) to make an elliptical machine out of that for your living room. 👍

Construction adhesive and screws work really great together.

This is the kinda nerdy genius yourll need around when the Apocalypse inevitably happens. Great video

I was looking at a disk brake rotor and wonder if they might work as well. They also can be found at junkyards, and even add small tires for off-rail use.

You are on to something there my friend, nice job! A few more tweeks and you'll be zooming down the rails in no time. Looking forward to seeing the final product, peace.

See if Vevor will give you a MiG welder. They're remarkably useful, and you can teach yourself fairly quickly.

You can always adjust the sprockets sizes!

Awesome project, found the channel from radio and satellite videos, stayed for all of the other awesomeness. Even went to my local version of Axeman, American Science and Surplus this weekend, not as good as axeman but very similar

The construction edit with the music was top quality editing :)

This turned out really well. Impressive build, man! Looking forward to updates in the future.

I haven't seen a single mice in the video. Donnie has been doing his job well ❤

Good job, love your stuff😎😎

Sweet

Wow! That evidence label was a nice touch to the tool man! =D Love this channel and the #SaveItForParts way of doing things.

I don't comment on videos I watch, but exception here. Pretty neat stuff you are up to. Keep up the good work and subs will come.

Your railroad stuff is what I'm here for. Some of the other stuff is good. Don't any viewers of this, live near you want to come and help? Like the guy who welded that sprocket, could you have put him in the video for 10-15 seconds? Get him some youtube exposure? If I lived near you I'd want to come help. I probably have parts I saved you could use.

Cooler than the other side of the pillow man!

Great work! I love the versatility of your projects!

I would extend the handlebars upwards so you don’t have to bend forward, present model looks harmful to the back. Nice work!

Dude, that's epic!

Awesome

Looks like good exercise.

Suddenly, I have an urge to watch a Ma and Pa Kettle movie!🤔 As a railfan, I can appreciate your Gandy Dancing car. Over the years, I have pondered upon my own thoughts of design. Not too dissimilar, I might replace the motive of power with a small engine, swap your center A-frame with a tall lounge table with beverage cutouts, and install a couple of secure bar stools and perhaps a potted palm over in the corner. Naturally, mine would also be coupled to another small flat car trailing behind, fully equipped with a wet bar and a very cute cocktail server that also provides cigar services. Please feel free to use any of these ideas if you happen to have any of them lying around your garage. I look ➡️ to your continuing saga on this project. Cheers!🍸🍸🇺🇸

Hey Guy. Hope you're doing well. Enjoyed the video - the editing w/music during fabrication played well. I'll trade you something for that Carhartt jacket. That thing is great. Be safe.

Love this video❤❤❤

😎👍 "Why shore..it's just like worshin clothes." 😄 ...Get on ArcDroid's radar.......Imagine all the sheet stock you'll be saving for parts... 😉

You might have realized this by the end of your video but the most likely reason why it moves better when your weight is off the drive wheel side is that your weight is causing deflection in the aluminum axle causing misalignment between the bearings and a lot more friction in the whole system. Essentially every time the axle rotates you're bending it in a full 360 motion which is also going to work harden it and cause eventual failure. It also has to be putting stress on your wheel connections. Even poor steel has more "springiness" and elasticity than aluminum. See if you can find some old used well drilling rod for axles.

I wonder if adding a flywheel would help, or be an immense failure.

REALLY great, man! Pause on that, but definitely do come back. That looks pretty fun 🖖🐰🍷

tuck that one lit dish

I always watch your videos with a mind to failure points. Yep, I saw a few.....

If you make the bike part pivot on the axle, you can raise and lower the peddle end above/below deck and then you will have 2 modes of operation. Hand pump and peddle power. Attaching the bike frame to the axle will prevent the chain from putting bending force on the axle. This might also give you the option of engaging the peddle end to a gas engine.. Also, if you want to improve efficiency of the hand pump. Use a second chain going up to the handle and try to find a racheting gear for the handle end. I do not know if they make a double ratchet gear, but what I am thinking is one that catches on both strokes.

Ever think about making your own beer at Sandland? 🤔🤔🤔

OMG, thank you. Those reviews were boring in comparison. Edit: The aluminum will eat the torque built in the chain drive. Make the other handle swing another cam, I'm thinking more power strokes to even the torque.

Flywheel, need a Flywheel ! . ;)

Love these videos

Is it me or is the bass line kicking in at about 5:50 suggesting "save-it... for-parts! de-dumm-deee-dumm-deee... save-it... for-parts!" ?