I would have never thought of doing this myself. Thanks for the tutorial.
@CrazyCoupleDIY4 жыл бұрын
Cheers
@harisuresh25072 жыл бұрын
I built this on some perf board today and it works perfectly! Thanks, man!
@CrazyCoupleDIY2 жыл бұрын
Well done 👏
@OurDiverseWorld3 жыл бұрын
Very good Diy Relay Module tutorial
@jamesallen6007 Жыл бұрын
Many thanks for the information, very easy to follow. I have subscribed.
@CrazyCoupleDIY Жыл бұрын
Thanks
4 жыл бұрын
Hello my friend. Do it yourself is a beautiful role model. Thank's for the information. See you. big greetings.
@CrazyCoupleDIY4 жыл бұрын
Thank you! Cheers!
3 жыл бұрын
@Gerardo Gage 👏👏👏👏👏
@Relations994 жыл бұрын
My 2 cents. "unlimited useless components" is simply not true (after all, the Chinese manufacturers are always looking to cut down to the minimum number of components). An optoisolator is the best example of something really useful and really important when switching AC. Totally agree with you when we're talking about switching LVDC, but most relays have an AC rating on them too. I also agree that the LEDs can be totally excessive for most projects.
@CrazyCoupleDIY4 жыл бұрын
Agreed
@edwardrodney2543 жыл бұрын
I realize I am kind of randomly asking but does anybody know of a good site to stream newly released series online?
@robbybenson71284 жыл бұрын
Easy as Good job mate Posting videos very frequently these days.
@CrazyCoupleDIY4 жыл бұрын
Yeah thanks
@HamedAdefuwa2 жыл бұрын
Great video just built this❤️
@CrazyCoupleDIY2 жыл бұрын
Well done mate
@saydiy15284 ай бұрын
good job. do you used high-level-trig? how to use it low-level-trig? thanks.
@crazypeople67604 жыл бұрын
Nailed it brother
@HackingInfo5 ай бұрын
3:23 trigger LED should be on +ve and collector of the transistor not in the COM & NO pin which suppose to be AC line genarally
@CrazyCoupleDIY5 ай бұрын
Wrong The led connected to the common will turn on when the circuit it complete. This happens, when the armature connects to the NO pin of the relay. There is, however, a little visual issue in the diagram. The positive leg of the led, which looks like it is connected to the common pin, is actually connected to +ve..
@avenger42354 жыл бұрын
Ha ha ha, you solved my problem. Also JLC is the best. I am going to order few of these from them
@CrazyCoupleDIY4 жыл бұрын
I know, thanks again
@kanika10844 жыл бұрын
Well done again
@iwantagoodnameplease3 жыл бұрын
I came here as I wanted to see someone make a relay component module by wrapping wire, rather than making the relay module BOARD. But I liked the nice animations so it wasn't a waste of time!
@CrazyCoupleDIY3 жыл бұрын
Ha ha Cheers
@frankcaccamo35683 жыл бұрын
Unbelievable your the best.
@CrazyCoupleDIY3 жыл бұрын
Cheers mate
@bnepeople59233 жыл бұрын
I have always ordered my stuff from JLC PCB
@TheWeepingCorpse2 жыл бұрын
Thanks, very useful But those wires are not called twisted pairs lol.
@CrazyCoupleDIY2 жыл бұрын
Oops, ribbon cables Damn.. ha ha
@IvanLabrador3 жыл бұрын
Excellent video, I am a little new to this, what would be the difference from using a diode to an octocoupler?
@fatnareda41474 жыл бұрын
Easy as
@Dj_JohnMac Жыл бұрын
How to switch it on with them cheap mx-rm-5v or i have the better rx480e-4a but i would prefer to use the mx-rm due to cheaper cost but it goes high then low causes my garage doors to open while i am at work iv tried time delay but its just becoming over engineered it should be as simple as sending a high to a NPN but if it always goes high on power up this will trigger relay or on a reset everyday
@CrazyCoupleDIY Жыл бұрын
Sorry I am a bit confused So what are you trying to achieve? What's the scenario?
@ramadhanrhjp5771 Жыл бұрын
If i want relay with delay can u explain to me
@CrazyCoupleDIY Жыл бұрын
my upcoming video is on that topic only. Please stay tuned
@ramadhanrhjp5771 Жыл бұрын
@@CrazyCoupleDIY ok
@sohan25102 жыл бұрын
I am at beginner level, have a confusion at 3:15 - there are 3 wires at the left side, red wire to 5v dc, black wire to ground & there is another wire as ash color, with which i am supposed to connect that ?
@harisuresh25072 жыл бұрын
positive of your battery
@CrazyCoupleDIY2 жыл бұрын
That is correct. It is a NPN transitor so the base connects to the +ve
@sohan25102 жыл бұрын
@@harisuresh2507 So for using it with arduino, i have to connect red wire with 5v, black wire with ground & Ash colored wire with any digital pin to make it HIGH/LOW, for turning the device on/off AM I RIGHT ?
@harisuresh25072 жыл бұрын
@@sohan2510 Yes.
@sohan25102 жыл бұрын
@@harisuresh2507 thanks brother ♥️
@matt7595372 жыл бұрын
How do I do a 12v?
@CrazyCoupleDIY2 жыл бұрын
Same setup Use a 5V voltage regulator or if you're looking for something simple, just throw in a zener diode in reverse bias. Check out this discussion: electronics.stackexchange.com/questions/127525/reducing-voltage-with-resistors
@danielducu2 жыл бұрын
I wonder if the same components can be used for a 3v dpdt relay?
@CrazyCoupleDIY2 жыл бұрын
Yes
@Dali-yd3bf3 жыл бұрын
Hey the gerber file doesn't want to download can you fix that please
@CrazyCoupleDIY3 жыл бұрын
Apologies for the inconvenience I have just uploaded a copy to the google drive. drive.google.com/file/d/1M3PTzTjbTbXTmr3dRlm_RFx1EEME8G7x/view
@Dali-yd3bf3 жыл бұрын
@@CrazyCoupleDIY Thank you so much
@Dali-yd3bf3 жыл бұрын
@@CrazyCoupleDIY Hello is it the same gerber file in the video please ?
@CrazyCoupleDIY3 жыл бұрын
Apologies that was my bad. The correct one is this one: drive.google.com/file/d/1nTqW5lt4LXGkdkpmn_hwBVQSUMnZm7Y9/view?usp=sharing
@aleksander0023 жыл бұрын
I can't download a gerber file. Can you upload it somewhere else?
@CrazyCoupleDIY3 жыл бұрын
Sorry about the inconvenience I have updated the link and it should work now And thanks again for watching my video
@mikemwewa84422 жыл бұрын
can use same setup with a 12VDC relay?
@CrazyCoupleDIY2 жыл бұрын
Absolutely
@anonymoususer9004 жыл бұрын
Why is the diode required at all?? I use them without diodes and they work just fine
@CrazyCoupleDIY4 жыл бұрын
They will but, If you are not aware of "Inductive Kickback" then you will very soon kill your microcontroller. Remember: It is very important to place a diode across the coil of the relay because a spike of voltage (inductive kickback from the coil) is generated (Electromagnetic Interference) when the current is removed from the coil due to the collapse of the magnetic field. This voltage spike can damage the sensitive electronic components controlling the circuit. Note: Short circuits on Arduino pins, or attempting to run high current devices from it, can damage or destroy the output transistors in the pin, or damage the entire AtMega chip. Often this will result in a "dead" pin of the micro-controller but the remaining chip will still function adequately. For this reason it is a good idea to connect OUTPUT pins to other devices with 470Ω or 1k resistors, unless maximum current draw from the pins is required for a particular application To know all about relay, checkout my blog post: diyfactory007.blogspot.com/2018/04/driving-relay-with-arduino.html