Six years after you posted but here appreciating the work you put into this video, Thanks James!

Nice job! I have been looking for an operator for a couple of years. Either they were cheaply built and had a very short warranty or they were pretty expensive for little features. This one will work! Thanks again!

Very good step by step instructions. You do things a little differently than I yet all roads lead to Rome. Thank you for taking the time to do this helpful video. E/.

Very nicely done video and informative. I ordered my dual gate system 2 days ago. My gate is 200' from the house, but I have a backhoe and have already run power out to the 6" x 6" steel posts.

Thank you so much for putting this excellent video together - very helpful and informative. Top job.👍🏻👍🏻🏆

Great video. Bought this system over a year ago and am just getting ready to install it. I do have to add some components for solar application as my system was only a direct wire. Looks to be time consuming but your video will definitely help. Nick in Arizona

From an old Vocational retired instructor from Florida..."You did an excellent job of everything!" Except for your wind problem. I saw your supervisor walking around inspecting the red bucket.

Thanks for this great video it has helped me with my install and saved 850 for installation God bless

Love your detailed video. I really like the background music. It reminds me of watching the old silent movies with Charlie Chaplin.

Good job how did u tie in 2 solar into 1 plug in ..

I enjoyed the video of your gate openers and need to install this same configuration at my house. Please let me know the part number you ordered in order to get the battery box, driveway sensor, kepad and extra battery so I don't have to order them separately. Thanks,

The opener is ok according to my experience, I was installing a single arm one: a little bit slow, the remote is property protocol and I cannot program my RAM 1500 to open it.

James how do you like ghost control brand? What series did you go with we live in Oklahoma with high winds and need a heavy duty arm.

Thanks for your video I just buy the same system you help me a lot thank you so much gracias

Nice video - do you have a video of those metal post installation? I have the Ghost system and gates but can’t seem to find someone to put metal posts in for me.. Any help would be greatly appreciated.

GREAT VIDEO, THANK YOU!!!!

Yay! James uploads yet again! I love this channel!

Looks great thanks for your help 👍

I see I watched your video 3 years ago I just order my gate openers and will be installing them soon also waiting on new gates

Is that an Aleko Venice gate? That looks eerily similar to the gate I bought. Yes, the entire gate was built with metric, but some fool (badly) attempted to do metric to SAE conversions. Now that it has been a year later, how has the system behaved?

Good job James, what is the model number of the system you installed? Thank you in advance

Hello great job hey did you ever get the gate lock work if so did you make a video thanks

It was very helpful!!!

Wow! Thank you so much for making this video! SO informative and you seem like a very patient and handy man 😊

You have lights out on the front gate, why didn't you tap into the power supply for those instead of using solar?

Awesome review and install tutorial. I will be receiving mine tommorow. We have a business on our property and am wondering .... Can I set business hours. For instance. From 8am to 5pm if someone runs over the sensor the gate will open.... And after 5pm you will need to have a code to enter? I plan on calling support about this but dint know if you had a quick answer for me. Thanks.

If you can help me out here. I'm looking to install one also and is there a battery box for both sides of gate, or just one battery box with solar panel?

Great Video !!!

How are you liking this system now?

Great video

By chance are those bolts that didn't fit a 3/8 hole in the post metric? Goddamn things need a 27/64 bit. Shop I'm at has vending machines full of these things but it drives me crazy they won't just use SAE across the board for this kind of stuff. It doesn't have to be within thousandths of an inch because it isn't holding up a skyscraper so any whatever grade 8 is more than enough, just don't mix the zinc plated with aluminum. Great content, more information than I can absorb. So refreshing to see long single cuts instead of a mess of editing, I feel like I learn so much more when the human aspect of a task isn't edited out.

How's the reliability after sometime

How are your gates working today still no problems with them

WHAT ABOUT ALLOWING UPS OR OTHER DELIVERIES IN?

And did you ever get the WiFi add on you talked about

Really wished I would of showed how to set the closed limits on that dual opener

I think it’s funny how I came here to learn how to get them aligned and you gloss right over that part 😂

I see this video was from four years ago how are they holding up?

Hey James. New to your channel.

opinion on the mule openers from Costco?

can someone manually open the gate, by removing the pins where the opener attaches to the gate?

Still using Ghost? Have you had issues? Have you installed the wifi module yet?

People bad mouth Mighty Mule I instal and use Mighty Mule and Ghost I've been using a Mighty Mule 660 for 10 Years and no trouble. I run10 watts of solar on a deep cycle battery and its fine. All shaft openers have problems with ice on the shaft which can bind the opener it is easily fixed with a plastic sleeve over the shaft and some cooking spray in cold weather. Most people who have problems like gates that open by themselves were just to lazy to change the dip switch code in the opener and remote. Which is now digital so no more problems with that! Unless YOU instal it wrong! Both brands are very good it depends on the application and what you want it to do.

Awesome

Is there a manual override?

Just a thought, you mentioned a wifi call box. Why not buy a Nest or similar doorbell and mount it buy your keypad.

Is there anyway to shut off the awful beeping?

good job,, its been a few years now is there any way to make a update on how well it still working after a few years, any problems you ran across or back downs of system ,,

My gate got damaged and i need a new one i need a new one , and how much is the cost

If you have lights on your post don’t you have electric at gate?

I want this gate remot control I you have or how I can buy

Ordered this. Ghost control gate opener. Total bs they don’t include battery box with the solar model. What do they think you are going to hook the solar panel you just bought. I bought the same one from Amazon for the last 300 and was the exact same thing if not better.

How do i order a gate from your company

Size of the gate?

Are you still happy/satisfied with Ghost Controls?

How strong is a gate automated from a car driving through it though?

How long have you used the Ghost operators?

your body is in the way of the clamp install

kennys gate

I have ghost controls here in Florida. We had terrible service with them (still have the product since we already paid for it all), they won't come out to fix anything after a couple months of having it. And the company's technical support online is utterly GARBAGE. I have to call and wait for representatives that barely know what they are doing, and even if they have a clue, it's not like they are there and able to actually figure out what is going on. After all of this, I am making my own for any other gates I want automatically opened.

upgrade yor mic to wind guarded onE!!!!!!