Even 7 years later, your videos are being helpful! Thank you. I installed my roof rack and rails today on my 2016 MDX thanks to your guidance. I’m glad I didn’t pay somewhere else to do it. You gave me the confidence to do it myself. God bless you!

Thank you!!! Worked for a 2016 mdx. The only extra step i had to do was to drill a hole on the 17 1/2 inch strip so that the cover could clip into the socket.

Thank you very much! Very useful video. After watching it, it was straight forward processed, however, it took me about 2 hours to install both rails and crossbars. The most difficult part was to remove white plastic clips without breaking them, broke 3 of them. Great that my roof rails came with 6 spare clips for that black rear plastic piece. Definitely worth doing it yourself. My dealer quoted $258 for the installation. I appreciate your tips and tricks.

The best starting place to remove the roof molding without using tools is right at end of roof molding, next to TAILGATE. It took less than a minute to remove it on my 2018 MDX. Thanks a lot for the video.

Thanks. I watched your video multiple times before I installed the roof rails on my mdx. Thanks a lot.

Thanks for the very helpful video! Made the install very easy. First side took 30 min and second 15. I also used a plastic wall anchor as the spacer (part 2 of your install video) to support the front piece and it worked perfectly.

Oh man I'm so thankful for this video. Bought a cpo 18 advance with chrome rails and the rear on driver side has a little play. I was worried it mounted from underside but so happy to see I can tighten the nuts/bolts. Awesome!

The installation wasn't as daunting as I imagined, thanks to your detailed video. Many thanks!!

Thank you! Normally I'm intimidated by making cuts or holes on any material. Great video and saved me $300!!

Thank you much! The removal of the brackets to attach directly to the rear V shape hinge and pop on was extremely helpful.

Super helpful, thank you. I would recommend adding in the notes to cut the trim exactly as the instructions say. If you leave it even a little too long, it gets pushed up by trim where it has an angled area where they can bump into each other. -- For viewers, this is the issue covered in Part 2 of this video.

Very helpful video. After viewing this, the first rail took about a half hour. The second took 15 mins. The only weird part that came with the kit were the two screws to further secure the plastic chrome cover. The screws were not metric and I needed to use an imperial sized allen wrench to fasten. It was also a little tough to start the nuts due to the bolts being painted when the MDX was made. If I remember correctly, the roof rack I installed on my 2012 MDX was aluminum. $400+ for my new 2019 MDX roof racks having all plastic parts seems like a total rip off.

Very helpful. Put it together pretty quickly. Also, ordered the side rails and cross members on Amazon and bought a roof carrier cheaper than ONLY the side rails in Canada!

Most Excellent. The $500 to buy the plastic rails was painful in itself... To have paid more to install would have been insulting. Thank you!

Really well done video. Thank you for taking the time. Project was done in under 30 minutes.

NIce vid. I really appreciate how clear and easy to follow it is. I did find that the plastic clips on the hinge cover broke but when I was prying them off, however, the roof rack kit comes with 6 new ones. I also cut the roof molding at 17". It's metal underneath so there's no deflection. Thanks!

Installed my roof rail and cross bars yesterday, Thank you for the video and make my installation easy

It worked perfectly. Thank you for doing this. So easy with your instructions.

Thanks for the excellent video. I just installed them on my 2017 SH-AWD Tech. The stealership quoted me $1100 CDN + tax installed.

Thank you for the well crafted, step by step video.

Thanks , this was very helpful video. I could get it done just by looking at the video. Other videos made it look like a daunting task.

Awesome. Man. I now know how to do it. No more dealer. Keep up the good work!!

Thanks for the vid. I just installed the rails on my brand new 2019 MDX and it look great. I used your vid as the instructions. The only issue I ran into that you did not is that the bolts I received did not property fit the screws so it was a hassle to bolt the rails to the roof.

Wow! I just called acura and they quoted me 2 thousand dollars I was shocked! Also another thousand just for foglights on a 2020 tech!

Looks really good. Im installing one purely for aesthetic reason. Still on the fence with the running boards.

I appreciate the way you explain everything

Thanks for the video you saved me big time! Edit for the new roof rail kits that ship have new white clips for rear roof rail panel you can just pop of the old ones that usually break click on your new ones and click the whole thing on i broke a bolt off when tightening a nut be aware of over tightening seems like an Acura fault though, still works great

Thanks for the video Jason... you've saved the day and made my day!

Fantastic and easy to follow instructions.

Good video buddy boy.thanks

Exactly what I needed!!!! Great video!!!

Great video, thanks. Just one question -- it says part 1 of 2, but it looks like the install is all in this video, and I don't see a part 2 in your playlist. I'm assuming this is just a mislabel?

Anyone installing on 2020...watch out with the screw.. Bolt studs are painted... So you will have hard time screwing down... Its a pain in the butt!!! .... Careful you dont cross thred....if you have same issues... Dont force it... Yiu will break the bolt stud!!! I broke. 2... Tighten little and untighten....repeat this. This over and over until bolts are tighten all the way down... Or find a way to remove the paint from the bolt stud...

is it the same concept with the 2007 mdx?

AWESOME you just saved me $800

Nice video. Good job. Any body molding videos ?

Thank you!

Good afternoon. Can you tell me, please, where did you buy the chrome roof rails for the Acura MDX? Can you provide a link or address?

Awesome; thank you!

Nice video, very useful.. .thanks !

very nice video, nicely explained. I'm gonna try it on my car in the spring.

Great video. Is it the same for MDX 2020?

Very well done video. I have a 2011 Acura MDX and wanted to find out if you know if there is a great amount of difference between mine and the model years that you have shown here?

Great Video! Is the installation of the crossbars just as easy?

very nice . thanks

You said you found the roof rails on Amazon do you have the link I cannot seem to find them for 2019 MDX

Hi. Thanks for your video. I need your advice. I have Acura MDX 2017 with integrated rails and auto box Thule dynamic 900. On the Akura MDX, only regular holes are provided for attaching the cross members to the rails. I'm afraid that this distance is too small for such a big box. I watched a lot of your videos. I understand that you are well acquainted with the question. Perhaps you could suggest me what is best done in this situation. Is it possible to make new holes in the rails? As i understood i have two options: 1. The easiest is to move the box back. In this position, he stands on the shaky crossbars. But at the same time, the trunk will not open to the end. What I would like to avoid. 2. remove the integrated roof rails. And try to pick up another rails - enlightenment. But this can be dangerous in terms of security. So I would be very appreciative for your advice

I would like to give you 1000 likes but it just let me give you one 👏🏼👏🏼👏🏼👏🏼

well done video. thanks for the info

Thanks for the great step by step video. You mentioned there were links on your video to buy these roof rails on Amazon. The only ones I see on Amazon are like $425+. You mentioned you found some for a couple hundred?

My thing is why today's SUV'S start getting and install the roof racks on those trucks?

Hi their. Had a ? Can this be addapted to a 2008 mdx? Or where can i find the right fit?

Great video! Do you recall which company you bought this kit from? I'm having a hard time finding them currently.

Very cool! 🙂

Did you buy these on Amazon? Do you have a link?

Whats the use of it?

I have the rails installed, do I require to have the crossbars to carry anything in the roof?

Hi! Great videos. Which cross bars do you recommend?

It can not be done any clearer..

Did anyone buy cheaper versions on ebay or Amazon? The ones on amazon are listed at $430 and another 175 for the crossbars. I am trying to see if I can find a cheaper alternative.

Hello there, I'd like to know where can I order this rails....thanks

Will this work on the 2012

will this work for 2019?

My dealer actually wants to charge me 1500$ Canadian dollars for the rails.

This mod is crap (carmaker's design). I cannot believe that the car company makes you have to cut so much! Man, they really want to save $$ by not including the rails to begin with... My minivan only needed the cross braces to be added...

What 6 dimwits hit your vid off with a thumbs down?!!!???