DIY RV Reflooring with a Flush Slide-Out

Рет қаралды 736,778

Күн бұрын

DIY RV Reflooring with a Flush Slide Out - Reflooring our RV!
We have a 2005 DRV Mobiles Suites. It has carpet and linoleum in it from the factory. After traveling 2.5 years, we decided it was time to refloor the rv with something that was more aesthetically pleasing than the aging original flooring. Being DIY RV people, we did it ourselves!
We decided to go with a vinyl plank flooring that looked like wood that we found at Home Depot. It is the Allure brand, and the color was Khaki Oak, which included some mixing of grays and tans. It has a Grip Strip edge, which means there are some ledges on either side with adhesive on them, so when you place the planks side-by-side the adhesive ledges stick to each other and hold each other in place.
We also chose the Vinyl Plank style so that it was going to be flexible for going around the road, not a lot more weight (although it does weigh more overall than the linoleum and carpet we removed), durable (stand up to our dogs’ claws), waterproof, easy to install, and cost effective.
In this video, we show and talk about how we remove rv carpet, remove rv linoleum, repair damaged subfloor with Bondo and install the Allure vinyl plank on our floor, which includes reflooring the flush slide out and deal with the flush slide floor transition.
We were so pleased with how easy it was to work with the Allure vinyl plank. Having install hard-floor in our previous house and having to cut each piece with a saw, the Allure planks were easily scored with a razor blade and bent/broken off.
The Grip Strip design was handy over a click-lock type because unlike click-lock where the flooring has to be at a certain angle to install, the Grip Strip can be slid and pressed down into place. This makes going under a counter or under the edge of a slide very easy.
We had to do some pretty intricate cuts up near the vanity and into the toilet room and closet. While time-consuming and precise, we were able to cut the Allure Vinyl Plank to fit all the tight corners and notches.
One of the biggest concerns that we had was that we have a flush side, and we weren’t sure how we were going to have the slide floor meet the main floor.
Our RV has a black plastic ramp that runs the length of the slide. The slide rides up the ramp and in when it is coming in, then slides out and down to sit pretty level with the main floor. Once we had the carpet out and could examine the situation, we found that there was a strip of plywood that covered a 2 inch gap between the plastic ramp and the slide floor. That plywood was just covered by the carpet and butted up to the foam carpet padding on the slide, so you didn’t really notice it. With the hard floor, we had to figure out a way to bridge this gap and make a smooth transition.
We decided to take one of the vinyl planks and put it over the gap. We did some tests with it and we determined that while it did have a little big of flex when you pushed down on that gap, overall it was pretty rigid and would do the trick. It would allow us to have this clean transition from the slide to the main floor.
Because this is a floating floor, we glued the first edge piece onto the slide floor so that it wouldn’t go anywhere and made sure it came to the point we wanted it to. We used Hard As Nails glue.
The major drawback to this design is that when the slide is pulled in, it leaves a section of the plank hanging out over the edge without any support. We must be very careful when the side is in to not step on the plank because it probably will not hold up.
DIY RV Reflooring with a Flush Slide-Out: www.mortonsonthemove.com/diy-...
------------
Thank you for watching our videos! .
We are the Mortons On The Move and we live full-time in our fifth-wheel RV and travel the country. We blog, vlog, and share our journey on social media. We'd love for you to join us!
INSTAGRAM: / mortonsonthemove
WEBSITE: www.mortonsonthemove.com
FACEBOOK: / mortonsonthemove
TWITTER: / mortsonthemove
--
CAMERA GEAR:
See what we use to make videos here: kit.co/Mortonsonthemove/camer...
OUR RV LIFE GEAR: kit.co/Mortonsonthemove/favor...

Пікірлер: 490

@ericball6652 6 жыл бұрын

Excellent presentation! I often get bored by videos like this because of slow talking and long pauses. Your discussion was informative, fluid and easy to listen to. Good job!

@milesjackson5111 5 жыл бұрын

nice

@openrange4999 5 жыл бұрын

Eric Ball yeah and the tits and ass shots definitely helped👀👀✅

@meganking536 4 жыл бұрын

When pulling staples after remodeling 3 homes with carpeting, one of the most time-consuming parts of the process that many look over when planning for their projects is all of those staples...I've found that needle nose pliers are best instead of regular pliers. This process takes forever for everyone. To give you an idea, my father and I ripped up 3 rooms of carpeting to which we listened to the Hamilton soundtrack whilst completing. By the time we finished. Hamilton died 4 times.

@joncharles6403 4 жыл бұрын

Use a grinder

@johnsimpson99 5 жыл бұрын

I'm a flooring guy with 20 years in the biz. Normally I cringe when I watch a DIY install. But you guys did a fantastic job. Kudos. Btw - you can replace the damaged plank relatively easily.

@lwood8 6 жыл бұрын

We have the same flooring in our home. We had a screw from the plywood underneath come up and create a hill on one piece. We called allure and they said to take a sharp knife and cut the whole piece of plank out and then cut the glue ends off a new piece and put some tough as nail glue on the plywood and lay the piece of plank on it. Worked like a charm.

@bigjimflying7195 6 жыл бұрын

lwood8 I bet it did. I was going to suggest that along with using a hair dryer to heat the adhesive getting it to release and make it possible to pull up the damaged plank(s).

@ruckusrollins8245 Жыл бұрын

Count Yourself , VERY-LUCKY !!!! My Carpet was UNDER the WALLS , UNDER EVERYTHING !!! its like they did All Flooring THEN Built , Everything on TOP of the Carpet and even the OUT-Side walls were On TOP of , Im guessing a Inch of Flooring !!! It took 1 full day to get Carpet out of Bathroom Under shower and strip Water-Closet Plus all the staples !!!! 40 foot Cobra 5thwheel .Late 90s . Watching U , Your's , was Very Easy !!!!!!

@raymondschneider5217 6 жыл бұрын

The new flooring made a world of difference; y'all should be super proud of your work. Thanks for sharing everything; you're da' best!

@jameslaiola4976 2 ай бұрын

❤❤❤ I just wanted to say thank you to you both. Quite honestly your videos have given me the confidence to take care of some of the things I had to do. I went ahead and got the composting toilet installed myself. Thanks to you I was able to do that. I was also able to fix my gray water tank- that scared me horrendously. Now I'm officially scared because I have to reframe my rear wall. I'm going to try and Salvage my floor. But it looks like it might have to come out. I did contact a leading technician from Thompson's RV and they told me that it's time to consider a new floor. So I'm watching your video and I'm biting my fingernails because I'm scared to do this, but I am going to attempt this. I just want to say thank you once again because your videos are giving me the confidence to make it through this and not pay millions of dollars on an older RV

@wnybricky1559 Ай бұрын

You guys crushed it.. professional result.

@tomclow4401 4 ай бұрын

I love the dog. I wish I could sleep like that!

@fargoloomis3569 3 жыл бұрын

I’m floored by this video.

@MortonsontheMove 3 жыл бұрын

Lol!

@rodneybrowning8358 4 жыл бұрын

A word to others in colder climates. We did the same to our class c moterhome. Looked great first year. Stored for the winter here in Montana, went out in spring and all the seams had pulled apart even after rolling them. Not sure as to the reason, but was not pretty. After warming back up they did start to move back together but never did completly. Hopefully others have better luck than we did. It did look awsome to begin with.

@MortonsontheMove 4 жыл бұрын

Good advice, we have been below freezing and noticed the floor shrink a little, but the RV has always been heated.

@andrearobaina4457 Жыл бұрын

Excellent video, thank you so much for taking the time and effort to post it. Very helpful and full of important tips!

@rogerharris6341 Жыл бұрын

Just watched the flooring install nice work bummer about the screw scratch try cutting the head of the screw off with a receiptrecating saw with a metal cutting blade 👍👍

@scottwoods7231 4 жыл бұрын

We had a tear in our floor from a screw. Now we use a moving pad placed on the floor when it slides in to protect the floor. When the floor is extending back out we remove the pad so it doesn't get jammed into the slide gears. Give the pups a bone, they worked hard. :-) Nice job!

@chriswetzel2240 Жыл бұрын

Thank you for the video we are in a major renovation project just like this.

@marcushennings9513 4 жыл бұрын

I previously worked for Williams-Scot which is the largest construction and security trailer leasing company in the U.S. We refurbished all returns etc. We used heat guns to help get the old stubborn floor tiles up.

@jeanettewalter7665 5 жыл бұрын

Just wanted to say thanks, replaced floor and used a piece of plexiglas under each side of the slide to protect the new floor after seeing your problem. So glad we did you can see scraping on the plexiglass where the steel plate support under the side.

@billwhite9701 3 жыл бұрын

Appreciate you all being so clear and honest in your in devour.

@frankiehume2452 5 жыл бұрын

We’ve had Allure flooring in our bathroom for about two years. It still looks brand new. I do remember the directions saying not to caulk or seal the edges as it is a floating floor and could expand and contract even though it’s not wood. Caulking the edges could cause it to bow if it expands too much. We will doing something similar to our fifth wheel soon. It looks great.

@dinahrogers5230 5 жыл бұрын

It's good to know you're still happy after 2 years. I've wondered not so much how the vinyl holds up but if the planks stay down, don't lift on the corners, bow, etc.

@frankiehume2452 5 жыл бұрын

Dinah Rogers we’ve had no issues at all. Still looks brand new.

@DoneRightReviews Жыл бұрын

I do this sort of thing for a living, and you guys did SOOOOOOOO many things well on your project. You even nailed the radius around the shower and toilet! Thumbs up from me! :)

@deborahf2520 Жыл бұрын

You did a fantastic job

@EpicMiniLife 6 жыл бұрын

Hey all. We did exactly the same remodel, the same way with the slides. Our slide edges have been solid, and even overhang just a bit to cover the original metal strip. We use 1/2 cut small pool noodles to buffer the slide bottoms when we bring them in. Works really well. We have four 8 to 10” pieces on the main slide, and two for the smaller slide. Just put them in perpendicular with the slide and they’ll take the weight and still slide. Your project looks great! Nice work, and kudos on the timeline. That’s pretty aggressive! We also did the WeBoost installation (4G RV). That was fun too.

@mitchelschaller9214 4 жыл бұрын

Did you guys have issues with the flooring separating a little bit? I have the exact same trailer and did the exact same floor this guys did. Unfortunately for some reason the planks like to come apart a bit even though we did the temperature acclimation and everything. Also my black part of the slide isn't straight? Haha

@thehoovah 3 жыл бұрын

The best tool for removing flooring staples is side cutters. You just clamp on the staple and pivot the cutters like a lever to pull them out. It will save you hours.

@dinapreuss1922 3 жыл бұрын

Wow. Thanks so much for this video! We're thinking about redoing our floors and have wondered how to address the pop out. Whew. Thank you!

@MortonsontheMove 3 жыл бұрын

Glad it was helpful! :)

@billderinbaja3883 3 жыл бұрын

Great job. Thanks so much for taking the time to discuss the issues you ran into... I'm planning to do our 5th wheel floor and the slides have me perplexed.... your whole thought process in addressing the issues was excellent. A few ideas for your next project: 1) Glued sheet vinyl... use a heat gun... comes right off 2) Staples... use 2 pairs of vice grips... grab the staple end with one, use the other to leverage, rather than pulling with muscles.... that'll tire you out!

@MortonsontheMove 3 жыл бұрын

Thank you!

@LonnieWormley 6 жыл бұрын

I am so glad that you went into details about installing the plank flooring on your slide. I am pretty handy with installing flooring and I have been searching the internet for a few years to see how re-flowing a slide would work. thanks for getting down to the nitty-gritty on this issue.

@kurtisca 5 жыл бұрын

Top notch video for a unique situation - Your information and advice is priceless (thanks for sharing!)

@leomartinez2367 3 ай бұрын

Love the floor, and tips. Great job

@garycompton9716 2 жыл бұрын

Excellent video. Thank you for sharing.

@MortonsontheMove 2 жыл бұрын

Glad you enjoyed it :)

@UncleLouietheMillwright Жыл бұрын

Hello, I compliment you on looking at various options to the flooring such as laying down a plank of plywood and so on... Great details you spoke of. I wasn't aware of such a flooring such as stick and glue as you used. All the best!

@pamela15932 6 жыл бұрын

Looks wonderful. And yes that wood market would cover that scratch so easy .

@deansorgan 6 жыл бұрын

Oh God, been there, done that! The staples were problematic but not impossible to remove during the reflooring of my 2004 Holiday Rambler Savoy. I went with 24” square carpet tiles by Mohawk and glued every one of them down. We did the slide-out as well and when extended, the tiles blend in together with almost no gap. And, we can walk on it with the slide out retracted. I was worried about the extra weight as well but doesn’t seem to be a problem. Thanks for sharing your experiences!

@karinmorris3294 5 жыл бұрын

Great video, your explanations were extremely concise and exact. I will be doing this pretty soon and I very much appreciate you.

@AnthonyBurbidgeTV 5 жыл бұрын

This video is an amazing resource! So, so, so helpful. Thank-you for making this video! The lip transition was a big question for me when considering how to replace the carpet in my own 5th wheel. This video gives me hope that it can be done!

@safbuys2684 2 жыл бұрын

I love it. I did everything but my slide-out. I will tackle that next. Thank you very much for the great video.

@shiftfocus1 3 жыл бұрын

So helpful! I'm planning a reflooring effort after I have a shop sort out our spongy subfloor (a whole other story), and this has answered just about all my questions.

@ThatGuyFromTexas87 2 жыл бұрын

3 years too late for you all but for everybody else that's about to do theirs I just have mine a 2020 forest river front living heritage Glen and and 3 of my slides leaked over this last storm in Texas. I'm in the process of doing all of the repairs myself myself there are only a handful of 4 to 5" long screws that hold your island down super easy to remove and cutting your water lines You can use shark bite fittings to reconnect for $25... totally worth it

@darrylthurston4336 Жыл бұрын

You can buy slide skis. These might help prevent gouging of the new floor when the slide comes in. Skis are cheap and easy to install.

@1GiPhoner 6 жыл бұрын

Great work! What a difference the new look makes.

@randalleversole917 Жыл бұрын

Great work, and tips

@enna4986 6 жыл бұрын

Beautiful! Nice rv, too! You have inspired me to plan to tackle our '98 Damon Daybreak... Thank you so very much, Mortons🤗

@francisthompson5425 Жыл бұрын

I was a contractor for years and removed a lot of carpet and staples, best tool I ever found to use were end nippers, you can grip and roll the staples out, also great for pulling small nails

@MortonsontheMove Жыл бұрын

Great tip! Thanks!

@FamilyChannelfun32 4 жыл бұрын

Kaitlyn's got it going on! I love that camper. Im about to do mine soon! LEt the fun begin!

@knuckleuprambo 2 жыл бұрын

I think this is one of the best diy videos on KZfaq. Siknd job guys. I'm motivated now to do mine

@MortonsontheMove 2 жыл бұрын

Thank you!

@user-ys7kw4cq4v Жыл бұрын

Nice job katlyn looks great. We have a DRV and this is our next project

@lloydmorrisonii1373 6 жыл бұрын

Outstanding video! Thank you so much for sharing. We have a quarter million dollar Diesel pusher with 3 slides. Being a retired police officer on a limited income, we opted for a nice pre-owned R.V that was a trade in, and we waited till November when the dealer's price dropped for New inventory. We paid just under 100K for a pristine unit. After 1 year of our dogs traveling and camping with us, the carpet cleaning became more than anyone could stand. To have 140 sq. ft. installed was $1500.00! We are doing the job ourselves, and needless to say, to do the job myself is scary. This video explains enough to where I can do this with confidence.

@marksgarlata3387 4 жыл бұрын

Lloyd Morrison II That price sounds very reasonable for a floor change out in a diesel pusher depending what all needs to be removed and reinstalled to do it right

@kjoboz 2 жыл бұрын

Great video looks beautiful!!

@MortonsontheMove 2 жыл бұрын

Thank you!

@rodneyjohnston6280 5 жыл бұрын

We just bought our 1st trailer trailer After watching you pull up your carpet I am sure glad That we have tile and our trailer

@kevincrane7267 2 жыл бұрын

We also used the allure flooring to replace the carpet in our old Itasca with a slide. We to were disappointed with not only scratches, but also the stick together joints that began to separate. When I do our current coach, it will either be sheet flooring or something that can be removed and replaced where needed without pulling the whole floor.

@carjam49 3 жыл бұрын

It looks so good. What a pair of hardworkers you are.

@MortonsontheMove 3 жыл бұрын

Thank you so much!

@meldeer6253 5 жыл бұрын

i think the old pup thinks you are the best and he's very happy to live in the nice clean RV To.. great job i did a 1990 allegro several yr's ago its very satisfying when your done great job kid's.. im glad you showed a lot of detail on that slide i have a 5th wheel with a gap now i understand why thank you & happy trails to you great job

@RoadsofFaith 5 жыл бұрын

We just took out our carpet and went with the vinyl plank click and lock in our RV and we had some tricky spots too. Always the extra challenges when working in an RV, right?! We didn't have slide-outs to work with, but had other challenges. We didn't have to take out the vinyl with the click and lock, but so glad to see the carpet go! We didn't take the carpet out of the bedroom either. We LOVE our new floor! It's a lot of work but it's worth it, as you already know. Nice work! Enjoy!!

@ABQdoubleG 6 жыл бұрын

The new flooring is lovely, well done!

@markt7291 3 жыл бұрын

Well done and good video.

@OldMeanGeezer 6 жыл бұрын

Very impressive job! A VAST improvement.

@Svaren 4 жыл бұрын

Pro tip for anyone removing a bunch of staples, use a pair of channel locks and you can get a much better grip along with using the long handles for leverage.

@CCB249 6 жыл бұрын

Great job! Love how detailed you guys are! Beautiful floor. Good video.

@ArbitraryExploration 6 жыл бұрын

Love it! I wanted to see how this worked in an RV. Thank you for sharing!

@georgegarton8736 3 жыл бұрын

Well,done, very articulate, I will be reflooring similar this winter in my 38 foot Winnebago. Great tips, will use Home Depot and like their product as I have seen it laid out in other videos. Use a drimmel with extension to grind that screw head. Thank you for the great guidance and great cheer! See you on the road of life.

@robby_brown13 5 жыл бұрын

Great video. Helped push me over the hump with redoing my floors. Time for the next project!

@3DPeter 2 жыл бұрын

Another solution would be using 2mm thick floor panels to raise the floor and then in the area where the overhanging lip is, use a piece of 2mm thick stainless steel that is about one foot wide and where the lip is glued on. then you can step on it without breaking the lip.

@junebugg8212 6 жыл бұрын

Wow....I have been waiting for such an all inclusive video of taking out and replacing the floor in an RV...I am working on my floors right now, this was very timely too! The lighting was good, you communicated it well, you had great video...the camera was pointed just where I wanted to see...thank you...and it looks beautiful...you guys did a great job!

@MortonsontheMove 6 жыл бұрын

Thanks!

@robbates8370 2 жыл бұрын

@@MortonsontheMove what brand of vinyl is that and where did you get it?

@robinmerchant2989 4 ай бұрын

@@robbates8370They show a slide at the end after the last piece is out in. Allure from Home Depot w grip strips.

@Ann-qi3ip 6 жыл бұрын

I put the same floor in my bathroom 7 years ago. I love it very durable floor. I’m in the process of building a Skoolie now and will be using it in the bus. Look great in your RV!

@valamonica 6 жыл бұрын

We pulled carpet out of the Townhouse. It was quite a job. Staples galore! Like that you used vinyl planks. I’ll do the same in my Class C.

@user-my5pj1cg1d 7 ай бұрын

awesome video. I'm planning on doing the same to my new 15 year old trailer and this was so helpful. Extremely well done.

@MortonsontheMove 7 ай бұрын

Awesome! Thank you!

@markjones8424 6 жыл бұрын

Your floor looks beautiful. Great video.

@rickylapine3919 3 жыл бұрын

Did the same in 2017. Also used Allure Vinyl Plank. The only way to go thin enough for the slides to still go over the top of. You could get another set of those grey slide slickers to put down at the corners of the slides before bringing them in to prevent more scratches.

@DnSAdventures 6 жыл бұрын

Looks great guys! Would definitely want to make that upgrade as well if we ever got a used rig with carpet. Thanks for sharing all the tricks and tips! - Shane

@allenburns3177 4 жыл бұрын

Try putting some of the pads they use on furniture. When you have hard wood floors. If you can feel the screw, should be able to file it down with a 6" bastards mill file. Slow process but doable.

@WhiteFox011 6 жыл бұрын

I know that this is a bit of hindsight, but, they make a material that is supposed to be able to '"repair", damaged wood like you have. You mix together 2 parts, and smear it into the damaged area, the more torn up the wood is, the better. I think they recommend overfilling the area, and then after it cures, level it out. It has something to do with how the product changes during the curing process. I think it shrinks a bit. I wish I had the name of the product. I saw it being used on an episode of, "This Old House", on some very difficult to reproduce elements of some exterior porch railing.

@MortonsontheMove 6 жыл бұрын

I used to use that to repair wooden plane propellers, totally forgot about it. Thanks!

@joanhazelgrove9444 6 жыл бұрын

The flooring looks great.

@fedmunds6960 6 жыл бұрын

Thanks very much for the video. I am going to tackle this project myself very soon and you really helped me with what to do! Great job on the floor too

@robertdoyen5434 4 жыл бұрын

We have the same floor in our old farm house and it holds up very good. We started in just the kitchen and 4or5 years later we put it in the rest of the rooms and we could just take up the door way floor up and put down the new floor and it blended in very well so when you get the screw flat you can pull up the old one and put in a new one.

@suzettecalleja3122 6 жыл бұрын

that looks a Ton better. Good choice in color..Well done!!!

@TheMinnow101 6 жыл бұрын

Very nice job ! That's a lot of hard work right there.

@knitnpaint 6 жыл бұрын

Than kyou so much for this great video. We are redoing our travel trailer and this gives us an idea what to do. Today we took out the built in couch and bench seats and table. Next the carpet. This vinyl plank flooring looks very doable and not to hard.

@steveschannel961 6 жыл бұрын

Great job! I love vinyl plank flooring. It's almost impossible to discern it from real wood and the water resistance and wear qualities are excellent. I have a feeling that the area on the edge of the slide will eventually fail. If you find yourself repairing it in the futute, I would suggest getting a piece of 3/16" or 1/4"" steel, 3 or 4 inches wide and mounting it on the leading edge of the slide with countersunk flat head screws to support the edge of the flooring. You can fill in the rest of the slide area with a piece of underlayment. The added weight will be neglible and you should end up with years of use.

@MortonsontheMove 6 жыл бұрын

Yea I think thats what we will do if this fails. 2000 miles, 20+ slide movements and so far so good, but it will just take one wrong step.

@jamiewalters4 6 жыл бұрын

very impressive! Looks like a worthwhile project, something I would also want to do in a rig; but I'm not sure I would have the patience to do it. Good job Tom, but wow Cait did an amazing job in all the hard parts! well done!

@valamonica 6 жыл бұрын

Epic difference and much healthier than carpet!

@workingtorelax1223 6 жыл бұрын

Flooring is very nice modern. Brings the unit up to date. Two things as side tips. One side cutters work way better for them staples. I have had to pull my fair share of staples out of rv carpeting lol. Not my favorite job. Second I saw some water damage at the front of the flush slide when the carpet was up. You might want to look into that at the front of the side, and that might have been the culprit to the rear as well. I have seen that a lot to. Smart idea sealing the floor edge before reinstalling the trim. You might want to thing it over and seal the trim edges in the bath, kitchen, and by the entry door to help protect them from water if their is a major spill, leak, or raining out side. I did this with my camper when we replaced the flooring because I figured it would be my luck something would happen. Lol happy camping, and safe travels.

@jimcormack1028 6 жыл бұрын

Great Video!! Thanks for taking the time to make it. This was just the perfect info we have been looking for. Nice job!

@robertaleite87 3 жыл бұрын

I really like it! Excellent job guys!Thanks for share! 😊

@dicknewman9009 4 жыл бұрын

I have to give you credit that is some really good flooring I put it in a lot of apartments and unlike carpet I don't have to tear it out every 6 months that is the way to go if you want something that's going to last and if it doesn't it's easy to replace

@michaelhiggins8994 5 жыл бұрын

Awesome job! Doing my 2000 newmar 5th wheel right now. This will help!

@DaleKlein 6 жыл бұрын

It looks nice. The lip of the exposed plank when the slide is in: make a strip of wood, with short pile carpet wrapped around it, to fit under and support the edge when the slide is in, put it in place when the slide is brought in.

@maryelizabeth8917 Жыл бұрын

This was one the most well narrated how to videos. Thank you♡

@MortonsontheMove Жыл бұрын

Glad it was helpful!

@mr.potatohead5670 3 жыл бұрын

I'm glad I found this video I have the identical trailer and doing the same thing. Great video y'all.

@MortonsontheMove 3 жыл бұрын

Awesome! Thank you!

@bunnielynn777 4 жыл бұрын

It looks great! You guys did an awesome job!

@moviebuffbabe5651 6 жыл бұрын

I've had this flooring for a couple of years now and I love it! you're right though unsupported it will chip/break so figure out a way to support it if there is any chance it will be hit or stepped on in an unsupported area. No need to glue it down it doesn't move and i've got it in both large and small areas :D

@henrygross6583 3 жыл бұрын

Good job on the floor and video.

@MortonsontheMove 3 жыл бұрын

Thanks!

@micahvanregenmorter1286 6 жыл бұрын

Highly recommend picking up enough boxes to finish the trailer, as if you wait to long it will be hard to find the same thing. I had that happen to me. It was only about 6 months between projects. Would also pick up a spare box for repairs.

@dinahrogers5230 5 жыл бұрын

Great advise that applies to any material that is completed in phases. Even if the product is still available later on, it's unlikely you can buy the same "run". If the two products are visible together there could be a noticeable color shift.

@ectjr100 6 жыл бұрын

Great job guys!

@bigmikestan 2 жыл бұрын

Hello to the dog in the video just kicking it in the background

@BKKKevin 6 жыл бұрын

I would make some wood planks that can go under the flooring when the slide is in to support it to prevent someone from breaking if someone accidentally walks on it when it’s in...

@roncameron9541 4 жыл бұрын

Awesome. Thanks for all the tips and hints...

@1savdsoul439 5 жыл бұрын

A little Velcro would hold your corner piece in place. You can buy it at Walmart in the sewing section. Just pick up a roll of the industrial-strength Peel and stick. Pretty handy to have any RV anyway. TFS. Hubby and I are almost done doing the main floor in our motorhome. Ugh! We went with the click lock laminate. We did lay a subfloor down to help with insulation and sound.