◀ Kim Ji-woon’s site Wikipedia ▶
How to read DIY is DO IT YOUR SELF, and in Korean, the abbreviation for DIY is Do It Yourself.
Our World Building Materials DIY is a woodworking DIY shopping mall site that sells wood and wood DIY furniture materials.
We are giving you tips to help you make DIY furniture easily with a drill and pieces.
There is no separate DIY furniture brand and we are suggesting how to make it.
We also provide DIY kit products for simple assembly.
Please refer to the Internet furniture-making workshop World Building Materials DIY to make good products.
We suggest how to make furniture by uploading it as a video.
Internet Furniture DIY World Building Materials and we all DIY
◀ Kim Ji-woon’s 1-minute post ▶
Making a mini Douglas fir plywood cleaning box
◀ Ji-woon Kim, CEO of World Building Materials ▶
Hello, this is Jiwoon Kim, CEO of World Building Materials.
What about today’s content?
This is a cleaning box and trash can made from Douglas fir.
This content is made from inexpensive Douglas fir plywood rather than expensive wood.
A mini hinge is included, and it is a mini hinge for furniture.
It is designed in black to match the design.
Because it is open, there is a sign
Storage is possible
Although it is called a trash can, it is a storage box that can also be stored.
I think it would be good to simply use it in a one-two room or small space.
Then, I will show you how to assemble the new manager, not me.
◀ World Construction Materials Site Manager Shin Woo-ram ▶
Hello, this is Shin Woo-ram, World Building Materials field manager.
This is a trash can storage box made of Douglas fir plywood.
I made it a little minimalistic and small.
I will show you the assembly sequence.
When it comes to materials, the most important thing is 12mm thick Douglas fir plywood.
In the case of plywood, the thickness is set at 12t 15t.
For 12mm plywood, the exact size is 11.5mm.
I'm going to try assembling it, but first I'll make the most basic mamu frame.
I will talk about it sequentially, starting with the wooden storage box that goes into it.
In the case of the largest plate, the size is 278mm and 375mm.
and small plates
There are three plates that go from the bottom to the top plate.
On the front, there is a long plate measuring 170mm wide and 375mm tall.
This wooden board is the side panel and the back panel.
Additionally, the shape is made up of small plates and triangles.
It makes it possible to fit into a Douglas fir plywood trash can.
It is a wooden box with diagonal lines.
You have to create the outer frame first and then the things that go inside it.
Since it is easy to assemble, let’s try to assemble it.
Think of covering the back panel last.
Long board that goes left and right
partition inside
We will first assemble the three upper middle plates below.
The pieces used for assembly are 6mm and 25mm woodworking pieces.
Because the thickness of Douglas fir plywood is not thick,
It can be easily assembled using 6mm or 25mm woodworking pieces.
Because the pieces are joined together, you must always leave a path for the piece to work on (to prevent splitting).
I will assemble the plate that goes in the middle.
You can adjust the height according to your preference.
This board is in front of the Douglas fir plywood storage box and trash can.
It is a wooden board that can be moved back and forth. When you look at the front panel,
There is space left on top
It is used to create a gap so that the hand can go in and take it out.
Because the height is set at the desired location for convenience,
After leaving the way, we join together with woodworking pieces.
It seems to be roughly assembled, but if it is as it is, there are no holes.
Since we are assembling it, we use something that can be used as a right angle at home.
After holding the right angles and joining them together,
You must do the same work on the back side.
The plate is assembled without distortion.
Then the upper part
It may seem like we will make assembly very easy.
It could be because they arbitrarily paved the way, but
The important thing is how to cut the product when making it.
We need to calculate how these trees fit together easily.
Currently, the size of the lower, middle and upper plates of this product is the same.
When cutting, cut only three plates of one size.
left and right board
Because they fit together, they are both the same size, making a total of two pieces.
I will assemble it using only the five boards.
If this board
If it is covered over the left and right frames, calculations here become difficult again.
The middle plate always fits, so the current size is correct.
The upper and lower plates are widened by two thicknesses of plywood.
I mentioned plywood in advance, but the dimensions are
Because it goes beyond 0.5mm
In this case, you may have a headache.
Considering the size, use the foundation program
#woodworking #diy #wood