◀ Kim Ji-woon’s site Wikipedia ▶
The meaning of woodworking is a person who makes things by handling wood.
Second, it refers to handling wood to make houses or furniture.
Woodworking DIY Become the person who makes things using wood yourself.
Learn woodworking with Naiser Shin Woo-ram, a woodworking technician and woodworking certificate holder.
We also recommend trying interior woodworking while watching KZfaq videos.
This is World Building Materials DIY.
hello. This is Jiwoon Kim, CEO of World Building Materials.
What about today’s content?
Last time, we showed you how to hang a wooden statue, but since we have to hang the wooden statue and finish it,
I'm going to show you attaching drywall.
In the last study interior, I used white plaster board.
Because the kitchen is a humid space.
Before covering kitchen walls or tiles, use waterproof gypsum board.
The waterproof plaster is blue like this.
You can think of it as a gypsum board that not only has color but also acts as a waterproofing agent.
In the case of the same size, the 3*6 gypsum board size is
3x300 = 900 * 6x300 = 1800 Substitute this to calculate
The thickness remains the same at 9.5T.
The ready-made product is 3*6 = 900X1800 and thickness 9.5T.
Then we will show you how to install gypsum board.
Because it is gypsum board, I will work with 422 taka pins.
Since this side is not used, we will build a wall and finish it with plasterboard.
This is how it is fixed along the wooden wooden daruki wooden table.
One ledger is fixed like this
Similarly, the second waterproof gypsum board
I will adjust the position and fix it. Currently, two ledgers are attached.
The remaining space must be cut in the same way by measuring the size and width coming down from the ceiling.
I will check the size, take actual measurements, and then cut it.
If you look closely, you can see that the two ledgers are neatly attached with a 422 Taka pin.
And I'll show you how to cut it.
I will check
Flat MDF or wooden straws are also available. What is MDF?
Medium-density fiberboard English medium-density fiberboard MDF is a type of engineered wood.
You can use it as a flat iron, flat ruler, etc.
This is how a waterproof gypsum board foundation was created.
Let's attach waterproof plasterboard to the top.
Currently, there is molding hanging on the right side of the sink, so it needs to be checked and cut.
Let’s cut the waterproof gypsum board using a cutter knife.
After checking the position, I cut it with a cutter knife and work on it.
I will continue to fix it with Taka.
The part that got caught is on the sink side.
This is the part I just cut with a cutter knife.
The upper part is well fixed like this, and I will measure and cut the end of the left slab to size.
You can see that there is a lawsuit going on.
Since we need to put waterproof plaster on this space, we will try parquet finishing.
When taking actual measurements, it is always best to measure the bottom, middle, and top like this.
This is because the work space is currently unfinished.
We will cut and finish it with waterproof gypsum board.
Check and measure
Let's attach the cut gypsum board.
You fit it perfectly
I will fix it with a taka gun.
It looks like it's stuck like this.
We will finish the remaining part above.
Because there are seagull and goose shaped ceiling moldings on the ceiling.
We'll try to figure it out.
I'll try again with the cut waterproof gypsum board.
Both top and bottom are correct.
One temporary wall was completed by hitting one-ply gypsum board.
A wooden box frame is made, and one-ply refers to the term for constructing only one piece of gypsum board.
This is a wooden frame made of wood and finished with waterproof gypsum board.
#diy #woodworking #Surge in popularity