DIY Side by Side windshield for less than $100

No video

DIY Side by Side windshield for less than $100

Рет қаралды 32,646

3 жыл бұрын

Learn how we made a custom DIY windshield for our cfmoto zforce side by side for less than $100!! off-road trail riding with more comfort. build and installation
wind shield straps #amzn.to/3fiO0tE
diy windshield #cfmoto

Пікірлер: 68

@tammyd4099 27 күн бұрын

This is a great video, exactly what I was looking for. I had seen those straps but didn't know how they worked.

@CameronsonCamera 27 күн бұрын

Thank you. We are still using this today. The only thing we have done since then is added a section of rubber vacuum line to the bottom side to prevent scratches on the paint

@Dronerangerspro 4 ай бұрын

Great idea. Now you can make a folding one next. At least I bet you could!

@CameronsonCamera 4 ай бұрын

We’re thinking about bed covers and upper doors also

@wendellcrossley 10 ай бұрын

Awesome job. I used your idea but when I marked out the windshield I traced the hood with a grinding disk on edge than a washer with a sharpie. But I never would have done it without this Video. Also I put Foam take between the bar and the Plexiglass to keep the vibration down .Thank you. Nova Scoita Canada

@CameronsonCamera 10 ай бұрын

I’ve used that trick with a washer on flooring before, definitely a good idea. I’m glad to hear it was helpful.

@BiffSkeffington 4 ай бұрын

You guys are awesome!! Thanks for a great video - I'm headed to Lowes!

@thelongdaysofwheeling124 3 жыл бұрын

I know what my spring project is going to be now. Thanks.

@phoenixarizona8441 2 жыл бұрын

Awesome video windshield turned out great we have built a bunch of windshields for our buggies over the years we need to build some for our current buggies

@Jasoncohenour Жыл бұрын

Thanks for sharing, this will save us a few hundred bucks.

@Awavy1 2 жыл бұрын

OMG I have the same sxs and spent like 5 bills. I will use this method for rear now though! Thanks for doing this video!

@CameronsonCamera 2 жыл бұрын

It’s working well for us. Thanks for watching!

@jannandavid 2 жыл бұрын

Thank you so much! Great video! 👍

@chinosami2539 3 жыл бұрын

Perfect, i want make the same, Cheers from argentina, sorry for my english..

@CameronsonCamera 3 жыл бұрын

I hope it helps, thanks for watching

@andrewellis5218 5 ай бұрын

Using a flat washer works also to draw contour

@RVWeekendsRC1 3 жыл бұрын

Very good job:)Very helpful video!

@CameronsonCamera 3 жыл бұрын

Thanks

@randykestner3870 8 ай бұрын

Thanks for the video!!!!

@tilleypatrickpt 3 жыл бұрын

This is a very good video, good job Cameron's!

@CameronsonCamera 3 жыл бұрын

Thank you!

@4546ollie 6 ай бұрын

That would last about 5mins with my rig. But good job for your needs

@tomnutt6022 2 жыл бұрын

"ready for adventure" ha nice video

@jamespruett3195 2 жыл бұрын

We. Were lazy we got one for 200made for the machine works great

@CameronsonCamera 2 жыл бұрын

Nothing wrong with that, they’re a great investment

@doc559 3 жыл бұрын

🏆🏆🏆👍🙏🙏 SUBSCRIBED Thank you for sharing

@stuckpencil2509 10 ай бұрын

I just made doors for 35$ with straps and clamps with see through tarp

@CameronsonCamera 10 ай бұрын

Nice 👍

@zforce800 8 ай бұрын

Where did you buy your contour gauge?

@CameronsonCamera 8 ай бұрын

Contour Gauge Duplicator - 20... www.amazon.com/dp/B07XSJ2SWL?ref=ppx_pop_mob_ap_share. This is the one we have

@andrewstrawn3524 9 ай бұрын

what thickness

@CameronsonCamera 8 ай бұрын

1/4 inch

@issemxfi 2 жыл бұрын

Hi! Great video! Where did you get the straps???

@CameronsonCamera 2 жыл бұрын

Thanks! We got the straps off of Amazon .

@patogee 3 жыл бұрын

Hola donde venden el medidor de contornos saludos desde Chile

@rickliners6123 3 жыл бұрын

En Amazon.com.

@johnnywoodmusic Жыл бұрын

En el pinche Harbor Frey

@rickliners6123 3 жыл бұрын

Helpful vid. I'll be building this. Just saved 250$. Questions: How do you get the windshield from sliding down and bottom edge from rubbing and scratching the paint? I'm thinking weather stripping at bottom edge, thoughts?

@CameronsonCamera 3 жыл бұрын

I ended up getting vacuum hose and cut a slit down it then slipped it around the bottom edge . I’m glad it was helpful!

@gina6083 2 жыл бұрын

Could use pool noodle and your choice of adhesive or put on a glue gun bead/strip on bottom to keep from touching. Just cheap ideas.

@phoenixarizona8441 2 жыл бұрын

Rubber Hose around the edge of the windshield works perfect

@jcmjrtile1261 Жыл бұрын

Try pipe insulation

@RocksNRuts4 Жыл бұрын

they sell rubber edging

@petropete3122 Жыл бұрын

Nice job. Where did you get those belt type mounts for the windshield?

@CameronsonCamera Жыл бұрын

Thank you! We got ours from amazon, their should be a link in the description.

@petropete3122 Жыл бұрын

@@CameronsonCamera yes see it. Thanks again.

@zforce800 8 ай бұрын

What size of sheet did you buy?

@CameronsonCamera 8 ай бұрын

2x4x1/4

@zforce800 8 ай бұрын

@@CameronsonCamera would you have a link for the windshield can't find a 2x4 sheet

@CameronsonCamera 8 ай бұрын

We got ours at Lowe’s a couple years ago.

@rockyvictory9044 7 ай бұрын

Same issue trying to find sheet

@clintskidmore8394 2 жыл бұрын

How well does it hold up. Thank you from Ohio

@CameronsonCamera 2 жыл бұрын

I can’t say that I’ve had any issues with it, if you’ve got more time than money it’s a good option. I haven’t had any flexing problems and scratches are minimal. I did take it off at the little Sahara sand dunes (if you saw that one) because it was so hot, I wanted more airflow. Thanks for watching!

@clintskidmore8394 2 жыл бұрын

@@CameronsonCamera thank you I definitely have more time than money! lol I ride in Ohio and West Virginia so I think it will work great.

@clintskidmore8394 2 жыл бұрын

@@CameronsonCamera what size thickness for the plexiglass do you know?

@CameronsonCamera 2 жыл бұрын

We got ours from Lowe’s. It is 2’ x 4’ lexan 1/4” thick

@clintskidmore8394 2 жыл бұрын

@@CameronsonCamera thank you so much

@jamikeener7476 2 жыл бұрын

Can you take this off?

@CameronsonCamera 2 жыл бұрын

Yes we remove and install as needed, the straps are Velcro

@billdempsey9704 15 күн бұрын

Plexi will crack and shatter and hurt you ! Should of used poly lexan smh and dont need those windshield buckles smh just some velcro straps. And where do you get your crack?

@CameronsonCamera 15 күн бұрын

I hope things get better for you dude

@billdempsey9704 15 күн бұрын

@@CameronsonCamera that wasnt an answer. Where do you get your crack?

@jasonkirkley7838 2 жыл бұрын

Awesome video but your voice tho 😅

@mountainmike1685 7 күн бұрын

Under $100.00 after you buy a $200.00 tool

@CameronsonCamera 7 күн бұрын

I would say that if someone is looking into building something vs buying something , they most likely already have basic power tools. Dewalt tools are nice but there’s definitely cheaper options out there to get you started.

@humai771 7 ай бұрын

There were 3 other videos ahead of this one and none had any information of value to this topic this chick just slapped the ego right off those worthless posters.

@CameronsonCamera 7 ай бұрын

Thank you.