The moment you see what kind of beast this gate is guarding...

This is a valuable addition to my woodwork collection kzfaq.infoUgkxkNYRBJuiJ6EwD-tQSAlxg0eFKsnR2cgz I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

I held my breath while you were grinding off tabs from the latch, with your toes right next to the grinder!

Love the way it came out. Very good way to reuse the original gate and turned it into a beautiful piece !

They sell a quick strip disc for grinders at home depot. Makes quick work on removing paint from metal and leaves a smooth surface for painting

I’m renovating my families kitchen by myself at the age of 19. It’s fun to do that while watching your videos, I need all the motivation I can get haha

Late to this. Watching you work through the problems should be inspiring to others. Not many people can do that today.

“Ideally I would have gotten black screws, but they were not readily available”. Me looks at screws, looks at can of black spraypaint.... I see a solution.

The gate is amazing, almost as amazing as that cute puppy!

OMG...this is ingenious! I never thought about using wood slats in an ordinary metal gate! Thank you so much for this video. I'm totally going to do this!

" this space is going to be turned into a dog run" me:ooh must have a big doggie. End of video shows itty bitty pupper. Me: even better

I would put a kick board along the bottom on the inside. This will stop the dogs knocking the bottom slats off and also allow you to close the gate with your foot, if your hands are preoccupied.

I feel like you had a very enjoyable time making this. I found it extremely theripudic to watch! Thanks for sharing your boss mode remodleing, it makes me feel inspired!

WOW! I thought you got a whole new gate....had no idea you used the same gate and upcycled it. What a difference! So glad I came across your channel....binge-watching it all now! You are very talented!

Damn! Just damn! Now if you could get those bricks to match that chocolate color on the gate, priceless! Flipping nice.

"Ancient" - The moment we folks from the old turf spit our tea in a burst of laughter.

best thing of the gate is the security guard at the end of video ........good job buddy!!!!!

Kick Rocks! I Love My Grandma! Switch Back!

You’re pretty good.....not bad, not bad at all.

Hey that was an awesome tutorial! Side gates can be expensive but a DIY project like this one will save you money for sure. Just have to have the right tools and investing in such can also save you time and agony! Thanks for sharing!

I somehow stumbled o to your channel and I like how humble you are. After seeing how the screws looked, I would have pushed them into some cardboard and spray painted the heads black to match the gate.

I know America doesn't really use brick and cement to build houses, but I'd have thought the concept of anchor bolts would have reached the continent by now... Or at least the notion that bolts can't directly screw into brick ;) Great looking fence though!

I like the part where you kept your toes at the end.

I need to binge all of your videos at least twice.

Well done - looks like it was a labor of love and it paid off!

Great video and project shows off how much effort / time had to go in to it and for the 107+ thumbs-down-losers - NO ONE is going to copy his exact methods & techniques. Obviously, anyone with wood/metal experience knows there are easier ways to achieve the same results.

Gate looks good, but that brick wall… is HIDEOUS‼️👍🏻😎

I think it would look a lot classier with the screw side facing the inside. 🤩 But you did a beautiful job and it’s an awesome idea to use tongue and groove boards! Great choice of stain color too…Thanks for the video and instructions!

Thanks for the video it was beneficial for me to add this to my side gate.

Planning to copy this technique. Exactly what I was looking for. Thank you sir

Outstanding. It took lots of planning and hard work.

Very nice gate...specially that you started with an old gate....

It's incredible how many things you did that were either absolutely unnecessary or just out right wrong !!! Especially the fact that you put the latch on backwards !!!

Baby Doopy is soooo cute

Nice job, Maverick!.. it really was a great solution.. props to you!

Next time is Diablo blades when you sawzall steel as they are the best. We use it in our pluming company and nothing else. A Milwaukee sawzall is powerful

Paint that flakes in sort of rectangular regular blocks like that often contains lead.

Since the top of the gate was aligned with the top of the wall, the latch could have been installed on top of it.

Those iron scroll decals really scream "GRANNY!!"

Nicely done. Looks great, what a change. Very creative.

7:26 nice job bro!, 9:16 roach in the map, 15:38 checking the chipped board, 17:56 stylish

Puppies always cute

Wait... you had a grinder. In the future you can get cut off wheels. That would have been easier then the saw.

That gate looks amazing Ben!

My friend you did Amazing. I am doing the same job. It would have been nice to have added the material links but you did enough work. Thank you very much.

That little doggie is soooooooo adorable cute precious and gorgeous......❤️❤️❤️❤️❤️❤️❤️

Loved your work man! Recently a bought a house with my wife here in Chile (southamerica). The house isnt in a ver good chape cause it was a little left (sorry i dont know the exact word for abandonada in english). Anyways, im starting my own house proyect in order to modernize all the gates. I loved this style witj hoziontal wood and steal and im gonna watch your videos many times to get ideas. Hehe. So.. Great work!

Exactly what I was looking for. Thanks for making!

Cringed when that grinder was so darn close to chewing up those sneakers...and laughed when that branch denied you passage.... 'you shall not pass'....awesome job, counter sunk screws are probably what you were looking for...great job

Bro, SAFETY GLASSES!!! That grinding disk, if it breaks, will go right thru your dollar sunglasses and hopefully won’t go too deep into your skull, a full face mask is recommended!Grinders do bite, I would recommend steel toe boots if your using your foot as a vise, just saying. Invest in high quality tools. Invest in high quality products. Love the “ can do “ attitude, I hope you used stainless steel screws. Keep up the learning, nothing to it, but to do it! Love the puppy!

Good job...color matches your walls too...👍🏻👍🏻👍🏻

Came out amazing. Great work and patience!

Adorable gate but really adorable doggie.

A black sharpie on black paint loving it

Really nice job on the gate dude, and your Corgi is the best

The gate is awesome.

FYI... weld - join together (metal pieces or parts) by heating the surfaces to the point of melting using a blowtorch, electric arc, or other means, and uniting them by pressing, hammering, etc.

Hey. You should seal that wall so the color will come out better and match the new gate door. Just get brick or pavers sealer. I recommend water base as it’s more forgiven to mistakes

the gate looks fantastic but oh my gosh your puppy is so cute

Lag bolts are meant for wood. You need anchors.

Great project, and a well done how to process.

I think the gate would look even better if up spray painted the brick wall a different color. Maybe white?

I keep on looking at this video, an inspiration!!! Keep it up Bro!

only problem i see is handle is on wrong side. to open the gate, you should be inside your property. so Unless you plan on putting a Padlock on it. Anyone that wants to like see whats on other side can easily open the gate up and go in. so yeah.

Great job ... But The puppy it's so adorable !!

Looks really good thinking of doing something like this to my driveway fence I currently hate it but don’t want to spend thousands on something replacement

That looks very nice

Awesome work & the dog is so adorable

Diablo blades. You’ll never look back.

Te quedó excelente ese trabajo, quedé fascinada. El perrito super hermoso.

Nice job Ben, but to fit the latch, a masonry bit, Rawlplugs and s/s woodscrews. Really easy. Regards Jim UK.

Beautiful job done👍 and the puppy😍😍😍😍 I just love it😍

Awsome looking frnce...great job. The puppy is just adorable 😍.....

The gate is good and looked nice

Great job man! Gate looks good!

Great video bro! I have to do this soon to a huge gate 🤦🏻‍♂️

More Cowbell! Thanks for the inspiration.

OH MY GOD THAT DOG IS SO CUTE

Grinder for removing metal and old paint would work here better. It was a pain to watch :D

Good job for a city slicker 😀

Amazing Look nice and different

...and the puppy is too stinking cute!!

Sleeve anchors for the latch or pre-drill the whole and use plugs.

Wonderful job. Love your puppy. Sweet.

Looks good

Back in Dec 2019 I guess you did not know abought Tapcon Concrete Screws.

Looks great man!

Nice work I hope you add lock outside for safely. I was aww at this cute puppy. c:

Good idea bro 😎 👍

what kind of wood you used? It looks amazing!!!!

Great job 👏 👍

That’s an awesome gate!

Looks great. You could have black spray painted the screws. :D

Nice work young man

10:00 me at 8 years old gloating over my chocolate milk My dad: Rachel, you don't need that much chocolate in your chocolate milk. (Proceeds to drink half my glass and refill it with milk.) ^_^ Me : :( .... doesn't even taste like chocolate anymore.

Did a great job on that gate Ben!

Yes it's looks pretty good

No ship you should of used a angle Grinder But what do I know I'm just a Skilled tradesmen in the Hvac business

Hey this is the torch and soften the welds could pop it off real quick with a screwdriver

It would have been easier with a cut-off wheel on the grinder to remove the extras