DIY Sim racing steering wheel | HTEK H008 | HTEK Simulator Engineering

Рет қаралды 38,660

Жыл бұрын

DIY 3D printed steering wheel build timelapse video.
You can download the model from our website.
Assembly guide, and wiring diagram included in the package.
The wheel is 100% 3D printable with 220x220x200 mm table.
hteksimulator.com/termek/h008...
You can download the 3D printable model with assembly guide also from Cults3D
Follow me:
hteksim/
htek_sim.eng
www.tiktok.com/@hteksim
If you have any questions, feel free to ask:
htek.sim@gmail.com

Пікірлер: 123

@RossoSimRacing Жыл бұрын

Great build brother! enjoy her!

@RobVene Ай бұрын

The truth is that it is a very nice job. Congratulations

@netmoe Жыл бұрын

Beautifully done! Congrats on such a well executed build.

Жыл бұрын

Perfect build. Good job

@benoithutsebaut8678 Жыл бұрын

Nice job dude

@VAZHURERACING Жыл бұрын

Amazing work 👍 I print on automotive carbon film to achieve carbon fiber texture on detail✌

@hkr4life 2 ай бұрын

can you print my pieces in full carbon?

@horus_simgadgets Жыл бұрын

Wow very nice

@theproverbialbeef5641 2 ай бұрын

Amazing

@hkr4life 2 ай бұрын

WOWWWWW. amazing! will be my next build!! its possible upgrade your engineering in future adding the led for gear shifting and for the pit?

@ali012alshair Жыл бұрын

Nice Video

@hteksimulatorengineering Жыл бұрын

Yes, It is planned in the near future, with other wheels also.

@josephm8707 Жыл бұрын

Can you do a video on the H003 Redbull f1 wheel next?

@Niek.denHollander Жыл бұрын

what do you use to connect the wires to the rotary encoders? and what do you use to create the handles

@imJGott Жыл бұрын

I would love to buy this as a diy kit. I have a 3d printer but I’m going to need some of those medal/carbon parts.

@hteksimulatorengineering Жыл бұрын

Hello, It is 100% 3d printed, the carbon is only for decoration. :)

@imJGott Жыл бұрын

@@hteksimulatorengineering have you thought about selling this wheel as a DIY kit from your company?

@pdrtv6827 Жыл бұрын

Can you do a video on the H005 please?

@Jabbawock1972 Жыл бұрын

Would love to see a good design wheel without any screen...but better buttons and decoder part...got already a vocore dash Board so anwheel without screens would save 1 USB connector and is way more rigid

@hteksimulatorengineering Жыл бұрын

Send me an email to htek.sim@gmail.com , and I will send you a modified .stl file for the "screenless" version. :)

@Rick-kl6by 9 ай бұрын

Is it a alpine f1 wheel ? Anyway incledible project, really !

@VStein28 Ай бұрын

Sry if someone asked itr already, which boards did you use?

@claudemirbarbosadasilva9269 2 ай бұрын

Please make a video for h005,006,007 series.

@pensierolibero_73 Жыл бұрын

👍

@CatchiestWorm12 Ай бұрын

This really needs shift lights imo

@gigihpratama8425 Жыл бұрын

H005 video please?

@grzyb11 Жыл бұрын

Is no one gonna talk about how sexy this wheel is

@jeftesantiago Жыл бұрын

I recently bought the two DIY models, are you guys going to do a video in the H005 version?

@hteksimulatorengineering Жыл бұрын

It is on the to do list, but we have a very limited capacity right now. :/

@ryanokeefe12 Жыл бұрын

I wouldn't rely on dupont jumper style connections on something like this. They're horrible at staying in place and even if they do, the constant movement will loosen the connection. I'm sure it'll be fine for a little while but it won't take long to before you get intermittent connection issues. Get yourself some silicone wire, remove the header pins on the board and solder directly.. At the very least, use some hot glue to prevent movement of the connectors.

@hteksimulatorengineering Жыл бұрын

You are definetly correct, it needs some hot glue, otherwise you will have connection problems in the future, because of the vibrations.

@ryanokeefe12 Жыл бұрын

@@hteksimulatorengineering You can get black hot melt sticks to make it look like "backyard job".. my favourite thing about hot melt is that you can give me a quick spray of IPA and the bond releases immediately.. As soon as the IPA has evaportated, the bond strength returns.

@julien_bub2398 Жыл бұрын

What board do you use for the electrics and what software do you use to program it. I love the look of the wheel absolutely and I definitely want to rebuild it 👏👍

@hteksimulatorengineering Жыл бұрын

Thank you for the feedback! :) I used Leo Bodnar board for the buttons, and encoders, it is 100% plug and play. For the screen I used SimHub software.

@julien_bub2398 Жыл бұрын

@@hteksimulatorengineering ok, thank you very much for the quick reply ✌️👍. I‘m looking forward to building!

@salalatzo Жыл бұрын

Nice work, looks great! Did you print the buttons and encoder wheels? I'll be building one for my fanatec 8nm wheel base, can this survive the torque?

@hteksimulatorengineering Жыл бұрын

Yes they are 3d printed. So far I have not received any feedbacks from problems while using it with a dd wheel base, so you can give it a shot!😎

@jeftesantiago Жыл бұрын

@@hteksimulatorengineering My question is, where can I find Al the hardware like the screen and all of that? I’d there any instruction when I buy the files?

@dt2419 Жыл бұрын

@@jeftesantiago there is a list of required/recommended items when you buy the plans.

@jeftesantiago Жыл бұрын

@@dt2419 Yeah, but I was talking about the store to buy some of the hardware like the magnets or the screen. I ended up using 12mm x 3mm magnets and modifying the .stl file to fit them. I have almost all the parts by now, I only need to print the handles and a couple of parts to start assemble it.

@honsonchi6518 Жыл бұрын

Could you give me the buying link to these buttons?

@bernibg4666 8 ай бұрын

Hello!! Does this design and configuration work in a fanatec base??

@jayare7750 Жыл бұрын

I purchased this but I don’t see a wiring diagram for the DIN GX12/16. Don’t know how to hook it up

@hteksimulatorengineering Жыл бұрын

Hello Jay, Thank you for the purchase. Just wire it up like regular usb cables. You cut one end of the USB cable, solder 4 wires to the 4 pins, and do it with the second cable also. Make sure you solder each color to the exact same pin on the other half of the DIN connector.

@user-ix3ru4xs4m 11 ай бұрын

Does the 7 euro file also contain the names and sales addresses of all parts such as displays and buttons

@vladstefan5772 Жыл бұрын

Hello! It looks awsome! I jus bought the F1 version. I was courious how do you get out on a single cable both: the Leo Bodnar board and the Screen. (Is the screen somehow connected to the board and I am missing it?) Also, how about the led version for the F1 rim? :D Also 2: How would you wire the leds as well? - another dedicated board? Or change the board completely?

@hteksimulatorengineering Жыл бұрын

Hello Vlad, As I can see, this is the most problematic point for the users. I will make a tutorial about this in the upcoming projects. Basically you will need two usb cables, that are connected to the 7 or 8 pin DIN connector. For the LED's the most easiest way is to connect them to an Arduino nano.

@vladstefan5772 Жыл бұрын

@@hteksimulatorengineering I was thinking the same, I was not sure how to use 7 pins, as the 8 pins seems easy. Fot the 7 is like mapping the nulls to the same pin? Edit: tons of typos

@hteksimulatorengineering Жыл бұрын

@@vladstefan5772 Exactly, you are correct!

@claudemirbarbosadasilva9269 2 ай бұрын

And bom of eletronics?

@vladstefan5772 Жыл бұрын

Hi! I am trying to build the F1 version. I am not sure how am I supposed to connect the 3 wires that come out of each encoder to the board.. I would really apprrciate some help! Thanks!

@hteksimulatorengineering Жыл бұрын

Hello Vlad, send me a message to htek.sim@gmail.com and I will help you.

@aminos4779 7 ай бұрын

Broooooo that's cool ❤❤❤ but I don't understand the circuit. Pls If you have a diagram sent to me

@alexmattie Жыл бұрын

I bought the files but I wish there was more wiring help, specially for powering both the screen and leo bodnar board with the GX12 7 pin connector. Can you help me with that at all? Cheers!

@hteksimulatorengineering Жыл бұрын

Hello Alex, I've sent you an email with additional wiring diagrams. :)

@wikanderson Жыл бұрын

@@hteksimulatorengineering Hi mates! I just bought it too and i want help the the wiring diagrams! I've just sended you an email

@hteksimulatorengineering Жыл бұрын

@@wikanderson I have sent you the details.

@korytashi 8 ай бұрын

Did you get the files? I'm kinda lost too.

@jeenche 4 ай бұрын

@@hteksimulatorengineering Hello, is it possible to have the same additional wiring diagrams please ?

@TheMacmonty Жыл бұрын

Hello, what kind of paint did you use for the grips? And did you give it a final coat of varnish? Thanks

@hteksimulatorengineering Жыл бұрын

Hello, Regular plastic spray paint + clear coat as final layer.

@TheMacmonty Жыл бұрын

@@hteksimulatorengineering Thanks 🤙🏻

@toutpt Жыл бұрын

I wonder how full 3d printed wheel behave on dd like sc2. Most of diy wheels start with a metal front plate.

@michaelboyce3227 Жыл бұрын

Def not correct... LOADS of retail & diy wheels are either all 3d printed or made only with composites!

@hteksimulatorengineering Жыл бұрын

I encourage you to try it... Depending on the feedbacks, we will add metal reinforcement option also if needed. :)

@alecont6488 4 ай бұрын

Hi, what software use to design stickers ??

@saadniaz38 Жыл бұрын

How much does it cost to make this whole steering wheel. What wheelbase do you use and do you think ill be able to create everything with minimal computer skills?

@hteksimulatorengineering Жыл бұрын

It depends on what you already have at home, but I would say about 200 euros, if you start from basically zero. I am using a T300RS. I think you can build it without any problem. :)

@user-ym9xs6fp3m Жыл бұрын

I'm trying to buy the blueprint of Sim Racing Steering Wheel H005 this time. How much will it cost to make this? I have no experience making something like this, is it difficult to make this?

@hteksimulatorengineering Жыл бұрын

The whole build will cost you around 150-200 euros.

@IvanpilotNX1 3 ай бұрын

This works on ps5?

@kingston3452 Жыл бұрын

It looks great! Can I put the wheel on a logitech g920?

@hteksimulatorengineering Жыл бұрын

Yes, you can put it on a g920.

@kingston3452 Жыл бұрын

@@hteksimulatorengineering Do I need an adapter or something for that?

@hteksimulatorengineering Жыл бұрын

@@kingston3452 Yes, you will need a Logitech quick release adapter for this. You can find many on Cults3D or Thingiverse. :)

@pattrick011 Жыл бұрын

how much does it cost to make this estimate

@MultiSteelking Жыл бұрын

On what paper did you print the stickers? Do you have a plotter?

@hteksimulatorengineering Жыл бұрын

Just a regular sticker paper, and have cutted out everything with scissors to show that it can be done at home. :) Our main goal is to provide sim racing stuff that can be build with tools found at an average household.

@michalpavelka7808 Жыл бұрын

What board do you use for display?

@hteksimulatorengineering Жыл бұрын

VoCore 4” screen.

@Arif_Peyex Жыл бұрын

Any posible update for leds?

@hteksimulatorengineering Жыл бұрын

Yes, there will be an update soon. Official mod will be also available, because I've got feedbacks that community mod might not fit perfectly in all conditions.

@TotoWolffJr Ай бұрын

whats the price for total wheel to create ?

@victorhenrique6115 6 ай бұрын

you sell the wheel?

@midaktai137 Жыл бұрын

the €7 file included paddle shifter or i have to purchase it separately?

@hteksimulatorengineering Жыл бұрын

Shifters can be purchased separately. :)

@asieretxebarria5974 Жыл бұрын

Beautifull video!!, one question, which screen hace you used¿?

@hteksimulatorengineering Жыл бұрын

Thank you, it is a Vocore 4" screen.

@Jabbawock1972 Жыл бұрын

is there a part list in you shop files?

@hteksimulatorengineering Жыл бұрын

Yes, parts list is included in the assembly guide.🙂

@ar-do-gi9926 Жыл бұрын

The eletronic components where i can find? Which 3d software is?

@hteksimulatorengineering Жыл бұрын

You can purchase them directly from Leo Bodnar, or Aliexpress. :) By the 3d software, what do you mean?

@ar-do-gi9926 Жыл бұрын

@@hteksimulatorengineering in the video i can see a program with the structure of the steering wheel. Which program is?

@SK-wr5bj Жыл бұрын

Which material have you used for the 3d printing?

@hteksimulatorengineering Жыл бұрын

For the handles and encoders, I've used water washable resin, for the other elements regular PLA.

@SK-wr5bj Жыл бұрын

@@hteksimulatorengineering Thanks for the answer and a quick other question: Am I seeing it right that you use the GX connector to combine the two USB cables (from display and leo bodnar) into one

@hteksimulatorengineering Жыл бұрын

@@SK-wr5bj Yes, you are seeing it correctly! :)

@mementomori4972 9 ай бұрын

The Handles look very rectangle. Has anyone who has real sim experience tried it for a couple of hours in the sim and can tell me if that wheel is comfortable? Don't want to spend the time and money on something that is not well taught trough. Thanks!

@Morriitz Жыл бұрын

How much did it cost though

@hteksimulatorengineering Жыл бұрын

The whole build as you can see on the video cost me about 200 Euros, but it will depend on how much material, you already have at home. You can build it for less, and also you can use more expensive parts, which will increase the price.

@nadisonmenezes2468 Жыл бұрын

why don't you provide the code for the buttons for those who don't know how to program?

@hteksimulatorengineering Жыл бұрын

Hello, The wheel is 100% plug and play, you don't need to code if you are using Leo Bodnar board. :)

@Luisgoulartav 10 ай бұрын

@bagbulkin3117 7 ай бұрын

And it's only 6 euro, I don't believe

@fitchyyboi Ай бұрын

For the files you dingus

@bosanacmf4240 2 ай бұрын

Could i maybe get the stl files for free ?

@pipeferr14 Жыл бұрын

I am contacting you by this means since I have not received an answer by mail. I bought your design and I would need to overcome several doubts that I ask you in the mail, would you be so kind as to solve the problem for me?

@hteksimulatorengineering Жыл бұрын

Hello, Sorry to get back to you so lately, I was busy. I will respond to your email as fast as i can.

@dianapasquale6951 Жыл бұрын

What Is the full price of the build?

@hteksimulatorengineering Жыл бұрын

It is about 200 Euros, but it will depend on how much material, you already have at home. You can build it for less, and also you can use more expensive parts, which will increase the price.

@leonidarndt Жыл бұрын

the electrical scheme is so minimalist nothing is understood ! you can conect nothing with the scheme! the are no wiring for bottons, no wiring for screen! please update it. i bought it just for the scheme, so disappointed

@hteksimulatorengineering Жыл бұрын

There is a colored wiring diagram for how to connect the buttons to the Leo Bodnar board. The VoCore screen is plug and play, you don’t need a wiring diagram for it. The only thing you might miss is how to connect the usb wires to the DIN connector, which will be updated soon.

@leonidarndt Жыл бұрын

@@hteksimulatorengineering rotter buttons have 5 legs, on you diagram there is only 4 pin , one wire that are showing where to connect, but its doest show how and where to connect each leg! and when the other scheme will bw updated?

@kilroygaming89 Жыл бұрын

Bocsáss meg, de jól látom, hogy magyar vagy? Végre valaki kis hazánkban, aki ilyesmivel foglalkozik...

@hteksimulatorengineering Жыл бұрын

Igen, hamarosan érkezik pár új projekt is. :)

@danielnyilas1936 Жыл бұрын

@@hteksimulatorengineering Már nagyon várjuk meg gondolom minden magyar is .

@pauloyeghe1637 Ай бұрын

It does not work. Its just for show.Who builds a F1 steering wheel just to stare at it? Bozo.

@mitt4276 Ай бұрын

wdym?

@michaelboyce3227 Жыл бұрын

Was with you 1000% till i saw the hydro-dipped carbon fiber 🤢 why go to all the trouble making such a nice wheel to then do that? Honestly, skinning with prepreg carbon fiber isn't that difficult or that much extra labor... Or at least buy a premade sheet and cut as needed! Otherwise really nice build!

@hteksimulatorengineering Жыл бұрын

It is 100% your choice how you want to cover or not to cover the wheel. For this build, I've used hydro-dipping to see how it looks after a few months of usage. I was also kept the prepreg carbon fiber on the possibilites, but it would corrupt all the size tolerances of the build unfortunately.. :( For experimenting, in the future I will make an easier design 100% out of carbon fiber. :)