DIY Solar Tracker (Dual Axis)

Рет қаралды 18,500

3 жыл бұрын

With this video I tried to give some help and instructions to people interested on building a similar project.
Solar Tracker project using Arduino.
Dual Axis with switch for Manual or Auto(Tracking) Orientation.
Tracking can be single axis or dual axis with the second switch
Components, the Schematics and the Arduino code:
create.arduino.cc/projecthub/...

Пікірлер: 50

@RayH0 3 жыл бұрын

Very well done ✅. Thanks for posting

@anthonynjoroge7885 3 жыл бұрын

Amazing kind of work

@agtonveloncio 3 жыл бұрын

Thank you. Congratulations.

@nikolaospatsalidis6411 2 жыл бұрын

Great work!

@yeethiolij 3 жыл бұрын

Thank you so much!

@Geekswebsite 3 жыл бұрын

Thanks for the explanation

@tonybihoreau860 2 жыл бұрын

super travail a vous.

@stretchie Жыл бұрын

Hi, this is great, did you do a video on the construction of the frame. So how the motors and panel are attached?

@johnx9318 2 жыл бұрын

Nice. Thanks.

@sebastien1722 Ай бұрын

🙏

@Mr.Engineer. 3 жыл бұрын

Would you mind making a video of the system in your last picture for the video? I want to build a large system with an anemometer to make the array go flat in case of heavy winds.

@dorothyp9186 3 жыл бұрын

Hello, Mr. Englezos. I would like to ask is there any method you're using on the arduino? Probably like MTTP, fuzzy, etc. Thank you

@hongthanhpham3677 3 жыл бұрын

tks

@yogeshkalal7779 3 жыл бұрын

Did that code worked fine?

@sanclayjordansaragih3975 2 жыл бұрын

do the motor dc need a pwm setting? if yes, can u show the step please, thankyou

@gustavoazevedo9669 2 жыл бұрын

anyone knows which type of solar panel is that of the end of the video?

@ovalwingnut 2 жыл бұрын

Good job and it was helpful (especially your wonderful English:) Cheers!

@serralheriaeenergiasolar 3 жыл бұрын

Like e inscrevi

@acrometrall9701 Жыл бұрын

the red wire on the electrical scheme , that connect the top left ldr is not place as it should be , it need to be under it not near it (LDR)

@halalnaseer6005 2 жыл бұрын

Sir same project with real time clock module no light sensor

@jekhairuddinbinnordin6216 Жыл бұрын

Hello bro,how can i contact you. I want schematic diagram for the all circuit.. tq

@sachidiaz2014 2 жыл бұрын

Why is 'poserror' taken as 10 in the code? What is meant by 10 in here? Can you please reply.......

@hongthanhpham3677 3 жыл бұрын

exit status 1 'A1' was not declared in this scope

@adithyaraj1433 3 жыл бұрын

What's the total cost ?

@mannisingh5274 3 жыл бұрын

Dear u have made this ,whole lot complex .. very complex.. Simple models are also there.... No Arduino. , No. Motor controller.. just.1 LDR , 2 MOSFETS 1 DC MOTOR IS SUFFICIENT TO FOLLOW SUN...

@bryanliucn 3 жыл бұрын

Would you please point me to a URL where I can find the system you mentioned?

@mannisingh5274 3 жыл бұрын

@@bryanliucn kzfaq.info/get/bejne/rbJpg8Z42sXconU.html.... Use this to have some imagination.. but don't make dual axis tracker...

@manojitsen7666 3 ай бұрын

Sir please show the bearing system can we please connect because I’m making the replica of your project but with 50 watt panel , sir please I need your help I’m from India

@szilardbalint6971 2 ай бұрын

You have answered? U find the problem?

@yesulazaras3552 2 жыл бұрын

Code error void loop 53 no

@aniketspace 3 жыл бұрын

kindly explain circuit diagram once, its a request please

@alliswell4815 3 жыл бұрын

bro there are somany mistakes in that circuit diagram you need to rectify all those

@adithyaraj1433 3 жыл бұрын

Can u please send me clear circuit, my connection not working properly

@dhawalkantshinde5673 2 жыл бұрын

@@alliswell4815 Can u please send actual diagram

@hongthanhpham3677 3 жыл бұрын

code ?

@alliswell4815 3 жыл бұрын

Hey did u get the correct code for this project

@alliswell4815 3 жыл бұрын

Sir please post the correct code sir

@shikharverma1253 2 жыл бұрын

do u have the detailed circuit diagram

@alliswell4815 2 жыл бұрын

@@shikharverma1253 yes

@marlonbutac8563 3 жыл бұрын

Can you help me with my project sir? Thank you..

@alliswell4815 3 жыл бұрын

Hey did u get correct code for this project

@marlonbutac5407 3 жыл бұрын

@@alliswell4815 no sir.. How about you?

@alliswell4815 3 жыл бұрын

@@marlonbutac5407 i modified the code . But there is a small bug because of that bug i am not getting signal to the horizontal motor. I am trying to rectify it...

@marlonbutac8563 3 жыл бұрын

@@alliswell4815 can i message you on fb sir?

@marlonbutac8563 3 жыл бұрын

are you making this project too sir? i haven't figure out yet the automatic mode , but the manual mode is already working ..

@hongthanhpham3677 3 жыл бұрын

code fail!

@yeethiolij 3 жыл бұрын

Please, may I get your email? I am located in Germany. Thanks again

@oldwizzy Жыл бұрын

All this can be made much, much easier. The easiest way is how an Optical Telescope basically works according to the 'Equatorial' principle. The equatorial mount has a north-south "polar axis" that is tilted to be parallel to earth's polar axis, allowing the telescope to swing in an east-west arc, with a second axis perpendicular to it so that the telescope can swing in a north-south arc. By swiveling the polar axis of the mount or mechanically moving in the opposite direction of the Earth's rotation, the sunpanel can accurately track the movement of the sun all day, easy by one clock on 24 hours time line. See the link for this >> en.wikipedia.org/wiki/Equatorial_mount#German_equatorial_mount