Sure, it’s in the description but KZfaq makes it difficult to find 🙃 Here are the affiliate Amazon links: Grip tape: amzn.to/4a09uCq Film protection: amzn.to/3WsW4ff Best of luck!!

Bahaha yes you are right 😂 and just stupid if you don’t put grip tape (cause I almost broke my face when I didn’t do it).

AJ1 LOST AND FOUND ?

Yeah it does. Had to use some grip tape so I didn’t hurt myself 😂

@@HJartistry what is the point of sole protectors if the bottom is gonna get dirty anyways?

@@gahrilla_1 usually people use them to preserve the shoes sole a bit better. Normally it’s for more high resale value shoes…but I don’t have money for that 😂

Where do u get it from

I got it off Amazon- amzn.to/3rJlYOo this does 3 pairs of shoes… but it does depend on how big your shoes are. I did 3 pairs of men’s 10. And then the grip tape I got on Amazon too: amzn.to/476sH4Y Grip tape you’ll have a lot left over for shoes in the future

I actually am just testing out different sole protectors (paints for shoes, cleaners for shoes etc.) to try to find the best ones. This was the “cheap Amazon” version 😆 but I suppose if someone was into reselling this might be ideal 🤔

Not at all actually. It came off really clean. (Which was nice cause if it’s all sticky I feel like it defeats the purpose of it).

Sure thing! Affiliate Links: Sole Protector Film: 6x84 inch- About 3 pairs - amzn.to/3DrYDDz 12x72 inch- 5-7+ pairs- amzn.to/3DxbynO Grip Tape: Will last for 7+ pairs- amzn.to/454tGAP Heat Gun: Use on lowest setting- amzn.to/3Dtv2cK All Supplies: www.amazon.com/shop/footwearfashionista

It doesn’t work as well but if you have a hair dryer and do it in the hottest setting and the lowest speed. Hopefully that’ll help! It does take a bit longer tho.

@@HJartistry does a lron work if it has stem

@@kingdomgames512 I wouldn’t recommend using an iron with steam to apply sole protectors. Sole protectors typically require a strong adhesive bond to ensure they stick properly to the sole of your shoes, and applying steam could introduce moisture, weakening the adhesive and causing the protector to peel off more easily. Instead, it's better to use (a heat gun) or hair dryer to warm the adhesive on the sole protector before applying it. This method helps to activate the adhesive without introducing moisture, ensuring a better bond. Hope that helps! Good luck!

I have not tried contact paper. I would assume no, but you are welcome to try it. Worst thing is it won’t work and make your shoes sticky, best thing is it’ll work! I might test it out too 😂 another person said I should just try grip tape. If you want to check out my full length tutorial it’s here: m.kzfaq.info/get/bejne/qMeglKmcqMy7eXU.html&t

Sure I got it on Amazon. Here are the links: I use this film for the sole protector: amzn.to/3KStUEC And this for the grip tape: amzn.to/3ZhI2LJ

Also I just did a full video if you’d like to check it out: kzfaq.info/get/bejne/qMeglKmcqMy7eXU.html

@@cactucoterses9074 sorry I don’t understand what that means 🥲

Ohhh noooo! See if you can remove the gum with the ice cube method. Sometimes that’ll help. Aww so sorry!

@HJartistry I used goo gone bro. Took it off in a matter of seconds!

@@SneakerShetgood deal! That’s perfect! Sorry it messed up the sole protectors tho 😢

@HJartistry it's all good bro I ordered some actual protectors from Amazon got 6 pairs coming in.

@@SneakerShetgood! What brand/kind did you get? Def let me know how they compare if you get the chance!

If you don’t use the grip tape, yes you will break your face like I almost did. With grip tape you are good. Also I am doing another comparison video (testing some stuff currently) so I’ll let you know if I discover any new info. So far so good tho

Sure I have it in the description but KZfaq makes it hard to view easily. Here is the Amazon link: amzn.to/48Z4BdF Let me know if you have any other questions. Good luck!

Well you do have a very good point. Appreciate the honesty! I like doing tests and experimenting and I am gonna agree with you on this 💯

It’s also the bottom of a shoe, man. No one can see it so having these stickers on the bottom isn’t a big deal.

You should be okay with a hair dryer on the hottest setting…it might take a little bit longer tho.

Only a little bit. More of a scratching but it depends on the flooring. I wouldn’t wear them inside your own home (not the best for the flooring).

Agreed! This was fairly easy. But I’ll keep an eye out for other alternatives too! Thanks for the feedback!

Hey I got them both from Amazon… here are the links: I use this film for the sole protector: amzn.to/3KStUEC And this for the grip tape: amzn.to/3ZhI2LJ It’s in the caption/description too. Thanks! Good luck!

Sure look up 3M paint protection film. This is what I got on Amazon with this affiliate link: amzn.to/3S3MJrP

3m paint protection film here is the Amazon link: amzn.to/3tVYeIt

I would get at least 6 inch wide. But it depends on how small of feet you have. I got this one: www.amazon.com/dp/B004VFYCZE/ref=cm_sw_r_as_gl_api_gl_i_XHQABESMBCW7ZC3VG3CA?linkCode=ml1&tag=hjartistry04-20

I use this film for the sole protector: amzn.to/3KStUEC And this for the grip tape: amzn.to/3ZhI2LJ

Also I just did a full video if you’d like to check it out: kzfaq.info/get/bejne/qMeglKmcqMy7eXU.html

I linked it in the description or here it is too. I got it on Amazon. www.amazon.com/shop/footwearfashionista 3m paint protection

Hey! It is 3m paint protection film. If you’d like I can send you the link I bought on Amazon?

@@HJartistryshoot it 👍

amzn.to/3syP3gb here is the one for the film. I actually am doing a new video and tested both a hair dryer and an embosser (which is like a cheap heat gun) and def the embosser is better but the hair dryer on hot and low setting is decent.

And here is the grip tape (it will scratch up your house floors so I take off my shoes in my house 😂) amzn.to/3SDNSXt I tried wearing it without the grip tape (only the film) and I almost slipped like 682x. Prob any grip tape/traction tape would be fine. Also testing out just wearing the grip tape as the sole protection and I am pretty sure it’s gonna be a mess to remove (unlike the film, which was amazingly easy and no residue). Anyways good luck!

Amazon. Just a sec and I can send you the link if you’d like?

amzn.to/3FCZumm here is the link to Amazon or any grip tape will prob be decent too. I just cut to size

Thanks!!! Much appreciated 🙏🏽

@@cmartinez1012 no problem. Good luck!!

Very true!

@@HJartistry yup, so doing this and trying to prevent creasing them is ridiculous..

Sorry I don’t understand 🥲

These are a mens 10/womens 11.5

And let me know if you have any other questions. Always happy to answer 🙏

@@HJartistry Thanks Bro. I will

Also I just did a full video if you’d like to check it out: kzfaq.info/get/bejne/qMeglKmcqMy7eXU.html

@@HJartistry Thanks man. I'll check it out

Correct 👍

I would highly recommend a heat gun. I use an embosser which is similar but def go for the heat gun if you can. I should prob test it out to see if I can use a hair dryer and have it adhere properly 🤔

Don't you know by applying this heat unto the soles causes glue separation?

If you hold a heat gun there for a long time then yes you’d be right. This is only for about 15 seconds and it isn’t not to the levels of heat that would cause any issues. Thanks for the input tho.

@@HJartistryPlease if you can it would be greatly appreciated

@@ONLYLOSEmeLEGS yes you can use a hair dryer it just might take a bit longer. I should do another video just to test it. Usually it needs to be a bit hotter to help it apply better. Hopefully in a week or 2 I can double check it tho

The first one is a paint protectant usually for cars: amzn.to/40aCkfe But the other one is just a normal grip tape for skateboards : amzn.to/42u5M1o Both are from Amazon and a pretty decent price for the quality too!

@@HJartistry one more question how Many shoes can you do with each product purchase?

@@motorizedbicyclerider5296 so for that one I linked I wear a mens size 10 and it fits 3 pairs of sneakers (so like $8 per set I think it comes to) and the grip tape would be enough for like 8 pairs I bet. They last like 15 wears or so too.

@@HJartistry thanks bro

No problem! I need to do some more comparisons with other brands too. Are there any sole protectors that you have bought from that I should do a comparison on?

I wore it about 10-15 times. Just don’t wear it in wet grass like I did. That one only lasted like 5 times and then peeled off 😂 😭

​@@HJartistry is it slippery? on the wet grass or when you're walking?? I want to put it on my Louboutin

@@apj444 it is slippery on the grass (only slippery if it’s wet grass tho) if you don’t add the grip tape. Def add the grip tape and it’s much better.

@@HJartistry so in concrete don't feel slippery?

Sure thing! I have it In the description but it’s 3m paint protection film. Here is my Amazon link to what you’d need. www.amazon.com/shop/footwearfashionista And click on the sole protection part. I haven’t done it with a hair dryer but i have heard you can use a hairdryer too. Also if you have tried another brand of sole protection I am always open to testing new ones to find the best quality for a fair price!

@@HJartistry awesome thank-you! Sorry I missed it in the description 😬

No worries. KZfaq makes it very hard to even see where the links are. I actually tried to find it myself and it took me forever 😂 best of luck with it! Also if you have any suggestions for other brands of sole protectors I should try out I can compare. Just keep me posted 👍👍

Clear vinyl, it comes in matte and gloss. Permanent and removable adhesive.

@@TubeWatcher thanks for this! I never tried vinyl before. Which brand do you recommend and do you like permanent best?

Hey! It’s 3m paint protection. I got it on Amazon. I’ll link my Amazon just look up sole protectors: www.amazon.com/shop/footwearfashionista

Also if you want to check out my full tutorial I just made a new video: m.kzfaq.info/get/bejne/qMeglKmcqMy7eXU.html&t I’d love to hear your feedback!

@@WheelerRiches true! Can’t argue there. And only lasts for a few dozen wears 😢

Haha yes you are right 😂

@@HJartistry I’m envious you even take your shoes outside and wear them, I sometimes can’t even get myself to take them out of the box

@@K-Effect haha I can’t tell if you are being sarcastic or not. I know shoes are meant to be worn but I also like to try to take care of them. What’s your grail pair?

@@HJartistry I was being a little sarcastic about wrapping the entire shoe up in plastic to protect it, but about being too OCD to take them out of the box I was being serious. I have 2 grail’s, the first would be the Air Jordan 5 BLACKOUT and the Air Jordan 5 Retro Premio 'Bin23' . I’m a sucker for the Jordan 5, Reebok Pump and Adidas Superstar

Thanks for the feedback. I’ll have to do another video zooming in. It did work but I understand your hesitation. Thanks, I’ll make a more informative video next time

It works fine on the edges, I’ve done 3 pairs so far with the 3M vinyl and the heat gun. No issues! You going to possibly have trial and error on your first pair.

Appreciate your feedback! I think maybe he didn’t have a heat gun. I know when I tried using just a hair dryer it wasn’t as good. Also hope you are having a happy thanksgiving!

Yeah the grip tape makes the grip 💯 and can damage indoor flooring 😂

Thanks for the honest feedback. It actually held up for about 15 wears. But it wasn’t perfect. What brands of sole protector do you recommend? Any decent ones?

Not true, I did my wife’s retro number 1’s and she wore them all night for her birthday and they’re still on the soles just as good.

@@lionelbutler6541appreciate the positive feedback!! I wonder if there are some different brands they used. Also I know when I wore them in wet grass for a few hours it was a huge fail tho 😂

Haha good point 😂

I wouldn’t recommend walking thru glass for any shoes or sole protectors. That’s quite dangerous 😢

Well I do appreciate the honest feedback tho! 😢😢👍👍

​@@HJartistryPay the jerk job no mind, good job with the sole protection looks professional 👍🏽

@@productofthe80s appreciate you! Altho I am always open to feedback no matter how it makes me feel…I gotta appreciate the honest opinions ☺️

Haha okay!

Sure this is what the description says: 3M Clear Paint Surface Protection Bulk Film Roll 6-by-84-inches and then a little further down in the listing it says: 3M Scotchgard Clear Paint Protection Film And item model number says: C2I_INV_B004VFYCZE_R Just make sure it’s at least 6 inches wide and then whatever length your shoes are to make sure it fits properly. Let me know if that description works. Best of luck!

Yes yes will surely let you know in a few days, and what was the name of the Grip tape as well?? Forgot to ask about that, i just need the name of that grip product too

@@siddhantsharma1343 that one is a specific brand of grip tape but I would assume any brand of skateboard grip tape would work fine (not positive tho): BlackWidow Skateboard Grip Tape is the brand I got but possibly any brand would have similar results