DIY Spray Foam Tires - Do they ACTUALLY work long term? (Part 3)

Рет қаралды 80,809

3 жыл бұрын

Will spray foam work to make solid tires on a riding lawn mower? How about a garden trailer with weight? Lets find out! As a follow up to the first two videos I did on spray foam tires (links below) here is the third installment of spray foam tire testing. ↘️↘️Click “SHOW MORE” below to open the full video description! ↙️↙️ ⠀
Spray Foam Tires - Which FOAM Actually WORKS? | Part 1
• Spray Foam Tires - Doe...
* Spray Foam Tires Part 2 | DIY Run Flats TESTED To FAILURE*
• Does Spray Foam Work F...
⠀
⠀
DISCLAIMER We participate in several affiliate programs that earn us a commission on purchases made through our links at no extra cost to you! ⠀
Some product links are affiliate links which means if you buy something we will receive a small commission. As an Amazon Associate I earn from qualifying purchases.
⠀
⠀
⭐🌟 Check out ALL the products and gear we recommend here: ⭐🌟
📦 www.amazon.com/shop/ganderflight 📦 ⠀

⠀
🏘️ Join Our Groups Here: ⠀
www.ganderflight.com/groups ⠀
🎁 Find Value In This Video? Buy Me A Coffee:
☕ www.ganderflight.com/coffee ☕⠀
🚐 Favorite RV Gear:
🔸GasStop Propane 100% Emergency Shut-Off: amzn.to/3ZBtN4V
🔸Beech Lane Wedge Levelers: amzn.to/3mrfBww
🔸Fastway Zip 6” Breakaway Cable: amzn.to/3SNh2kO
🔸Motion Sensor LED Night Light: amzn.to/3ZHdyCY
🔸Fastway ONESTEP Wheel Chock: amzn.to/3yhlC1e
🔸8” Clip Fan Rechargeable: amzn.to/3yiOE0t
🔸Portable White Noise Machine: amzn.to/3kK5jHe
🔸Save your back with HitchGrip: amzn.to/3YnITJw
🔸MaxxFan 12v Vent Fan: amzn.to/3YpXVyu
🔸Propane Fire Pit: amzn.to/3yhn4kc
🔸Valterra Twist On Waste Valve: amzn.to/3mld6f3
🔸Latch.It Keyless RV Door Locks: www.ganderflight.com/latchit
🔩 Learn ALL about your RV, take the RV Tech Course Home Study Course:
www.ganderflight.com/rvtechco...
⠀
📖 Read a magazine for RVer’s, by RVer’s!
RV TODAY www.ganderflight.com/RVToday
🛠️ Favorite Tools & Gear
🔸My Everyday Carry Tool - Skeletal CX: amzn.to/3ZGO0Wp
🔸The BEST disposable workgloves! amzn.to/3ZGLiQQ
🔸resqme Original Emergency Car Escape Tool: amzn.to/3ydwCwU
🔸NOCO Boost X Jump Pack: amzn.to/3JaXXpJ
🔸VIAIR 12V Air Compressor: amzn.to/3YtWlMk
🔸the BEST Tire Pressure Gauge: amzn.to/41Pkr6P
🔸The BIG Rearview Mirror: amzn.to/41JbnAt
🔸Infrared Digital Thermometer: amzn.to/3kOUCTK

📸 *Video Gear I Use: amzn.to/3IHWEx2
If you find a “dead link” please let us know! We’ll send you a sticker!

📺 Want to see more of our videos? Don’t forget to subscribe and click the bell icon 🔔 so you're notified when we release new videos!

🎥 Love Gear Reviews? - Watch More!
www.ganderflight.com/gearplay...

🧰 Want more DIY projects? Check these out!
www.ganderflight.com/diyplaylist

🏕️ Watch more RV Life Here:
www.ganderflight.com/rvlifepl...
Connect with us!
💥 All Links www.ganderflight.com/links
🎵 TikTok www.ganderflight.com/tiktok
📷 Instagram www.ganderflight.com/instagram

💻 Facebook www.ganderflight.com/facebook

©️ Gander Flight, All Rights Reserved.
This channel is for entertainment purposes only; we are not experts or professionals. We share our opinions, experiences and what works for us. Please do your own research and make your own decisions.
⠀
#diy #ganderflight #sprayfoam
Spray Foam Tires - Part 3 Do they ACTUALLY work long term, spray foam,spray foam tire,run flat tire,spray foam tires,diy tires,diy spray foam,diy run flat tires,airless tires,solid state tires,expanding foam,flat tire,foam in tire,tire repair,can foam,foam tire,run flat,fix your own tire,how to fill a tire with foam,foam filled tires,tire foam,foam tires,filling tires with foam,how to foam fill tires,tyre foam spray,spray foam in tires,foam in tires,lawn mower tire foam fill,foam fill tires

Пікірлер: 150

@GanderFlight 3 жыл бұрын

Spray Foam Tires - Which FOAM Actually WORKS? | Part 1  kzfaq.info/get/bejne/gdSge7Z-pty0gJc.html   Spray Foam Tires Part 2 | DIY Run Flats TESTED To FAILURE kzfaq.info/get/bejne/o7ykhKpl1K3LiIk.html

@rcjabroniyup4959 2 жыл бұрын

I could just buy a new tire blah blah... Some people don't understand experimenting is just plain fun and interesting it's like being a kid again.

@GanderFlight 2 жыл бұрын

Agreed.

@thru-my-eyes Жыл бұрын

Great idea for the wheelbarrow!! I was hoping for better results on the wagon, too bad it was a bust. Thank you for showing so many different attempts to make it work. See you soon.

@GanderFlight Жыл бұрын

Thanks for watching John!

@ashleymarie7452 Жыл бұрын

Very thorough, balanced, authoritative. Thanks.

@GanderFlight Жыл бұрын

Thanks for watching Ashley!

@Maggie-Gardener-Maker 4 ай бұрын

Thanks for making the video on spray foam. I wondered if it works and now I don't have to try it for my self. I got tired of fixing the tires on my garden cart that is similar to yours and I looked and looked for a solution I could afford, I found 10 in. x 2.5 in. Cosco Flat-Free Replacement Wheels for Hand Trucks (2-Pack) for about $25 for the 2-pack. They are a little shorter than the original tires but I thought it was worth trying and I am so glad I did. I have hauled a lot of weight in mine and they have held up over the couple years I been having them on the wagon. They look like cheap plastic but they are very sturdy. I also like the yellow because it actually matches my little John Deere tire wheels that I pull that wagon with. I loaded up about 8 concrete blocks in it recently, the 16" x 8" x 8" size blocks. I have about an acre property and was moving the blocks from one end to other end of property. My little john deer is an S-100, I could tell the weight was on the trailer pulling it. I like those tires so much that I replaced the tires I had on my mobile mini greehhouse I built. When my hand cart tires get worn out I will replace those with the 10 in. x 2.5 in. Cosco Flat-Free Replacement Wheels for Hand Trucks (2-Pack) also. I really like those tires and can't beat the price. If a person doesn't like the bright yellow they could always spray paint them another color. If ya google those tires you will find them from several vendors. I got mine at the big orange store but they have went up in price there since I bought m last set.

@GanderFlight 2 ай бұрын

Glad they've worked well for you and that youve had no issues with going to a smaller tire size!

@racecyst127 2 жыл бұрын

Great tests and HONESTY 💪💪

@GanderFlight 2 жыл бұрын

Glad you liked it!

@scottyellis3442 Жыл бұрын

Thanks for sharing your experiment it helps me out in future tire repairs. I'll just buy a tube at this point.

@GanderFlight Жыл бұрын

👍

@AndradeLearns Жыл бұрын

Thank you! Answered exactly the question I was asking!

@GanderFlight Жыл бұрын

Glad I could help!

@davidbrine1902 Жыл бұрын

I tried this and it works really well. The foam inside the tyre kept expanding for about 4 days and now it's as solid as a rock! Well done!

@GanderFlight Жыл бұрын

Its not a long term solution, but was a really fun experiment and might have its place for certain applications.

@MikeJones-rk1un 10 ай бұрын

Same here. It has to cure for more than a day. Never mind what the can says. Do it ahead of time and keep it as a spare. Also the tires he is using are very narrow and put more pressure on one spot. Wider tractor front tires work better.

@artyberkhoff8878 6 ай бұрын

until you put weight on it. but they do make tire foam thats poly uathine big diffrence.

@perpetualengine Жыл бұрын

Planning to try this in the kids bike tires we get from the scrapyard. The kids only fit a bike for a few months anyway. It is so relieving when the bikes already come with foam tires.

@GanderFlight Жыл бұрын

Highly recommend NOT trying this on bicycles- the foam to weight and speed ratios say it won’t hold up long at all

@3MonkeysGarage 3 жыл бұрын

Rocking on. I still may give it a shot on my mower, the dirty b^^^^^^^. Something I did use spray foam for was making the shaped lining inside a guitar case. Turns out, probably do not want to leave your Gibson Les Paul wrapped in a trash bag exposed to the heat of expanding foam, or the potential of chemical leaks. It cured so globby I ended up cutting quite a bit back out and cutting panels of 1/2 foam to fit the guitar, gluing them together and covering them with my fabric. But hey, experimenting is fun. At the price of wood right now, I am visualizing spray foam lumber.

@GanderFlight 3 жыл бұрын

😂😂😂spray foam lumber!

@gregoryhamilton8574 2 жыл бұрын

Appreciate the info and the effort . Thx.

@GanderFlight 2 жыл бұрын

You bet!

@nathancorn5482 2 ай бұрын

I have a John Deere riding mower and it has foam in the tires. No problem. Love it.

@GanderFlight 2 ай бұрын

Know what kind of foam?

@user-xr1mz2lx1k Жыл бұрын

I'm an Englishman Liverpool actually and your a guy after my own style .The commandos have a motto adapt improvise and overcome and that's what you've done full marks mate. Yes you could run around going off the job trying to get a replacement tyre but we all know the downside of those wild goose crashes. Get the job done and on your travels keep an eye out for what's available to improve on what you've got.Well done

@GanderFlight Жыл бұрын

Thanks for watching!

@paulandrulis4672 Жыл бұрын

"Adapt, improvise, overcome..." Claimed as a motto of special forces all over the place, yet is just a quote from a silly movie.

@libertylovin2359 6 ай бұрын

Sorry about your country

@victormcox Ай бұрын

You saved me time and money! I owe you a steak dinner! Was going to try it but you helped make my decision!😂

@richbaumann2999 3 жыл бұрын

It might inspire a creator to make a specific foam for old lawnmower tires, different from what Is available

@GanderFlight 3 жыл бұрын

That would be cool!

@richbaumann2999 3 жыл бұрын

@@GanderFlight no accidents in this world.

@greggory448 11 ай бұрын

I took the valve core out, sprayed it in there until it came out. My release hole at the top never had a problem. They were hard the next day. By the way, I use the large gap filler foam😊

@GanderFlight 11 ай бұрын

How has it held up for you?>

@RustyShakleford1 19 күн бұрын

And updates??

@job38four10 Жыл бұрын

Good video, you answered couple of my questions. I have similar small tires on my portable generator, it doesn't get moved very often but when I do have to move it I cant with flat tires,. So maybe solid ties would be better for me....

@GanderFlight 11 ай бұрын

Solid tires would probably work best for you - but I'd just buy them - I don't think this foam setup would work well long term for that.

@alexfullmer4707 Жыл бұрын

I think I'm going to try this on my tool box cart. I have spent a lot of time in the past replacing tires, cleaning beads, putting in tubes, making sure there is nothing to puncture a hole in the tire and still come in the next day to find a flat. I even accused co workers at sabotaging my tires and/or letting the air out just to mess with me so I locked it up in a place no one else could get to and, yep flat tire. The cart just sits in one spot untill I really need to move it and then I air the tires, take it to the next location and park it there for the next few weeks instead of pulling it around to the different locations outside where I really need the tools like I originally wanted to do. So much time saved if you don't have to trek back inside to get a tool cause your tools are there beside you at the job. Yep, think I'm going to try this.

@GanderFlight Жыл бұрын

I think you'll be disappointed - too small of wheels and too much weight. Here's some additional testing: kzfaq.info/get/bejne/bp6KjNGEzsqXl2g.html

@philliphall5198 Жыл бұрын

It’s good for rolling gates is about all But I’ve used it in lawn tractor for cutting grass works also

@GanderFlight Жыл бұрын

👍

@ranger178 2 ай бұрын

the air and water is what hardens the foam if you had two-part foam it would be much stronger

@sterlingtarver3428 2 жыл бұрын

I am curious to try air soft pellets. They may fit through Schrader valve with stem removed.

@GanderFlight 2 жыл бұрын

hmmm -interesting idea!

@tedpreston4155 4 ай бұрын

I have a skid loader that came to me with foam-filled tires. The former owner used it for building demolition, and had lots of flats before he filled the tires with foam. I don't know what sort of foam he used. He may have had it done commercially. Whatever foam he used, it has held up in the skid loader tires for fifteen years now.

@GanderFlight 2 ай бұрын

Most likely a commercial two part foam - cant imagine this type of foam working on a skid loader

@PaulBurgess-vk7rr Жыл бұрын

added some water inside the tire for curing this time .foamed like crazy Didn't read the fine print on can for curing The foam when we have used for years had no idea that water helped curing process

@GanderFlight Жыл бұрын

@billsmith1770 Ай бұрын

try trans fluid or even used motor oil . over years , oil will ruin the tire , but it's free , and you ruin your tires by drilling holes for the foam anyway . you can't later put a tube in a tire that had oil in it though , it'll dissolve the tube quickly (like overnight) .

@hannesaltenfelder4302 2 ай бұрын

Is there ANY way to calculate the foam density for specific loads? I'd like to use foam for my orthotic insole. Any recommandations?

@PinePondCTDevilsHopyard-fy3hj 2 ай бұрын

I would try out the Window and Door Foam. It is minimal expanding and does not put pressure on door and window jambs. It is also softer foam. Just buy a can and experiment. Have fun.

@peterdibenedetto969 2 жыл бұрын

What about plastic dock wheels for buoyancy and keeping them from filling them with water. Cheers

@GanderFlight 2 жыл бұрын

Never considered those

@OKBadBoats 3 ай бұрын

Awesome video u answered my question on a small wagon!

@GanderFlight 2 ай бұрын

👍

@user-nf7ui7dz1z 3 ай бұрын

Need to run the test with a couple more variables. Different types of foam, closed cell vs. open cell foam, high density foam and closed cell vs open cell foam again. Wet the tire thoroughly inside before foam is added. Plus, without drilling the holes, wouldn’t it be better for the tire after it’s foamed because you could perhaps even air it a bit up after it’s cured and see if it is better or worse for its life, and you could build one of those things like the DMV has for dyno testing where you can run the tires under load and not need to actually be driving around for hundreds of miles or hours or whatever? Maybe even spin the tire immediately after foaming while it’s foam is still curing could help it spread with centripetal force, you know like have it mounted and then use the throttle to spin it while it’s off the ground under no load perhaps? Have fun, that’s the most important part of the experiments apart from solving a really great series of questions. Thx for the video, it got me thinking, that’s for sure

@GanderFlight 2 ай бұрын

Having fun is what started it all! Thanks for watching

@rcjabroniyup4959 2 жыл бұрын

I've been thinking of doing this on my hand truck. I hardly use it and it stays inside the garage. I have cans of foam just sitting there tempting me to do it. You think it will hold up ?

@GanderFlight 2 жыл бұрын

It will work - but for how long is the question...

@S1L3NTG4M3R 7 ай бұрын

👍 thanks again!! :)

@GanderFlight 7 ай бұрын

🙌

@N8-TH3-GR8 Жыл бұрын

My go kart uses lawn mower tires and one of my tires has been leaking bad. Would this method be okay on a go kart that is just drove around the yard?

@GanderFlight Жыл бұрын

I highly doubt it would hold up to that kind of use.

@johnn3542 2 жыл бұрын

Haven't used foam yet, but I keep putting tire slime and plugs in my mower tire, keep expecting the mower to stop working so I have refused to get new tires.

@GanderFlight 2 жыл бұрын

As soon as you buy a new tire, thats when the motor will quite

@babaoreally8220 4 ай бұрын

The flexibility of the rotating rubber would soon grind it into powder.

@GanderFlight 2 ай бұрын

👍

@GHuggins Жыл бұрын

What kind of foam does the OE use? They run foam filled tires on big heavy equipment regularly, so just wondering what they were using.

@GanderFlight Жыл бұрын

OE?

@GHuggins Жыл бұрын

@@GanderFlight Original Equipment or rather Original manufacturer if you want to think of it that way. Well, I guess they use a third party, but I know companies all of the time will have skid steer and hoist tires factory filled with foam. Funny thing is though if ones ever cut apart it looks like the foam is only in the tread area of the tire, which doesn't make sense but I assume it's very stout stuff for loads considering these pieces of equipment with load can easily weigh up to around 20000lbs and do 40 to 50 mph on the road then there are companies filling large tractor tires with foam and those can weigh up to 30 or 40000lbs depending on hp and size. I imagine it's just too expensive for your average person though - probably the 2 part you were talking about?

@GanderFlight Жыл бұрын

@@GHuggins gotcha, I figured that's what you were referring to but wanted to clarify. Ultimately, the customer obviously doesn't have a HUGE pain point, other wise the OEM would solve the issue, hopefully ;)

@jafinch78 Жыл бұрын

I was wondering about tennis balls and I've seen plastic pipe used as well for tubeless tire designs, though unless using a good quality rubber tube stacked... gonna fail is my guess. Might not with plastic pipe inside tires... though safe to go with rubber is my thought. Makes me now wonder about that playground rubber replacement for sand as well. The rubber products coupled with a coating of the FlexFoam-iT!™ 25 would probably be good for a while. Looks like Lowe's and Tractor Supply have "NuScape Brown Rubber Nugget Mulch" and the price looks good alone. Man, that gets me wondering about applying like you did with the side wall holes or maybe better using a sharp razor blade cutter to cut out the one or maybe more fill hole(s) and bonding that sidewall piece back in after filling with NuScape with like what the "sixtyfiveford" YT channel uses in the video titled "Tire Sidewall PUNCTURE permanent repair procedure" the PR40 to PR100 (difference in set time and viscosity) Rubber Weld by 3M.

@GanderFlight Жыл бұрын

Sounds like a good experiment to try ;o)

@jafinch78 Жыл бұрын

@@GanderFlight Yeah, thinking the rubber mulch is more feasible installed using the hole saw'd or maybe slit method and PR40 Scotch-Weld to adhere back the slits or hole saw'd out pieces. Thinking the slits will be the better route. My only concern is a lack of uniformity with the rubber mulch if there isn't an adhesive coating on that (maybe type 1 silicone though better to be a optimal rubber adhesive like used on the side walls or tire repair patches maybe) when installed and balanced out to be uniform.

@c-LAW 2 жыл бұрын

Tried it on those little 11" zero turn front tires. DIdn't really work. $3 / can for big foam wasn't a terrible loss of experiement since my tire was shot anyway.

@GanderFlight 2 жыл бұрын

Yes its definitely a weight to foam ratio on how long it will last.

@alexclaar475 Жыл бұрын

I used oversized pool noodles In the front Bogey wheels on my zero turn mower. It's a toro with a sixty four inch deck.. I'm not sure of the weight but i've been using them for almost two years now

@GanderFlight Жыл бұрын

Nice!! Good tip Alex. Just the foam noodle or air too?

@FaithwalkerTodd 3 жыл бұрын

I heard you can use automatic transmission fluid in place of slime.

@GanderFlight 3 жыл бұрын

Interesting - have you tried it?

@FaithwalkerTodd 3 жыл бұрын

Gander Flight No, I have not. I just heard about it. I heard about it from Henry at mowers n blowers. He’s one of the guys on KZfaq who makes videos about lawnmower repairs.

@GanderFlight 3 жыл бұрын

I may have to play around with that.

@FaithwalkerTodd 3 жыл бұрын

Gander Flight I just found the video, here’s the link. kzfaq.info/get/bejne/mMtjateVmZO1oJ8.html

@richbaumann2999 3 жыл бұрын

Maybe there is an alternative activator.

@GanderFlight 3 жыл бұрын

I think there definitely is a market for it!

@jeffmagers7182 2 ай бұрын

if you get a soft spot drill into it and put more foam.

@GanderFlight 2 ай бұрын

👍

@TheRealMeko 9 ай бұрын

Pls forgive the length of this comment BUT I have used a length of rubber, maybe its silicone hose.. I honestly don't... and added it to the end of the straw as a flexible extension for longer reach. Ive used it for wall/ceiling gaps where the space kinda rounds a corner or runs along a board where it needs reach but you need the expanding foam to really fill up the space so adding holes would be counter-productive. I plan to use this when i add the expanding foam around the hollow space around my bath tub. I think im going to experiment using my method but also i think im going to pry the tire away from the rim, add styrofoam, maybe glue it inside and leave a small channel to run my hose and add the spray foam that way .. might work 🤷🏼‍♀️ *Btw the hose is medical grade air hose like the hose from the hospital for oxygen or a nebulizer. (for anyone who doesn't know what a nebulizer is, it's a machine thats usually small/ portable for breathing treatments like at the hospital but for home use to help with asthma/copd/bronchitis ect.) I have asthma and i had a friend whos dad passed away and he had a large stash of those hoses so instead of throwing it out she gave it to me. So any of it that was already open, has been torn ect I've used in projects. I dont suggest wasting money to buy that special is all lol😂

@GanderFlight 7 ай бұрын

Did you experiment with it? How'd it turn out?

@jeffmagers7182 2 ай бұрын

maybe try foam for post setting, it's a more solid mixture.

@GanderFlight 2 ай бұрын

That would be a cool experiment!

@xMeta4x Жыл бұрын

First mistake I see is drilling holes in the tires. Remove the guts of the fill valve, spray foam whilst rotating tire for even distribution, then put the guts back in the valve.

@GanderFlight Жыл бұрын

I tried that on another tire and it never cured the foam inside going through the valve stem.

@PinePondCTDevilsHopyard-fy3hj 2 ай бұрын

Sounds like a good idea! Thank you

@ethanchapman674 Жыл бұрын

Just filled a tube woth it and am trying just for the fun of it

@GanderFlight Жыл бұрын

Let me know your results Ethan.

@GTrainRx7 Жыл бұрын

Never apologise for trying something out!

@GanderFlight Жыл бұрын

Knowledge gained ;)

@james10739 Жыл бұрын

You need to keep water out I have heard on the heavy equipment that come with foam filed tires that water breaks it down

@GanderFlight Жыл бұрын

Thanks for sharing that input James!

@Bigwingrider1800 3 ай бұрын

Fill with anti flat or a tube

@GanderFlight 2 ай бұрын

👍

@RC-ht6kh Жыл бұрын

You used too many hole 2 or 3 max at 5/16..lasts a long time

@GanderFlight Жыл бұрын

Thanks for the opinion!

@casderr11 2 жыл бұрын

It did not work now u have to try to use the rim now I have clean it and see if I don't need a new one

@GanderFlight 2 жыл бұрын

Thanks for sharing your experience.

@CometCycIone 8 ай бұрын

Tite foam it’s denser I have it in a Air jack tires for commercial vehicles

@GanderFlight 7 ай бұрын

👍

@yoshisaidit7250 Жыл бұрын

Yeah, I dont think using GreatStuff is a good idea. So, I ordered new tubes and 2 gallons of multi-Seal. That should fix all my hand trucks, wagons, and wheelbarrows. I will also try the 2 part FlexFoam 25 in front tractor tyres. But I wanna get new tyres before I waste foam on them. I might use golfballs or baseballs if I can find them lying around, to take up space so it takes less foam to fill a tyre. Low speed, so it wont matter on balance.

@GanderFlight Жыл бұрын

Sounds like lots of experimenting ahead of you!

@jafinch78 Жыл бұрын

I was wondering about tennis balls and I've seen plastic pipe used as well for tubeless designs, though unless using a good quality rubber stacked... gonna fail is my guess. Might not with plastic pipe inside tires... though safe to go with rubber is my thought. Makes me now wonder about that playground rubber replacement for sand as well. Glad you commented! What'd you wind up using?

@andygold 9 ай бұрын

A gallon of the flex foam 25 is around $190.

@dylanreedy2649 Жыл бұрын

They use foam filled tires in construction

@GanderFlight Жыл бұрын

👍

@DennisWintjes2 11 ай бұрын

Interesting. Like #466

@GanderFlight 11 ай бұрын

👍

@daleb5967 Ай бұрын

Lol.... My neighbors would Lynch me if my mower was three years old, let alone a older mower with hole in the tires....

@user-ee4pc3fu1d 2 ай бұрын

Eventually the foam will break down

@DanBollinger3 2 жыл бұрын

Not a good solution. This is low-density, rigid foam. You want high-density, flexible foam like Smooth-On's FlexFoam-iT! 25.

@GanderFlight 2 жыл бұрын

Thanks for the suggestion Dan. Where can I get some of that?

@andygold 9 ай бұрын

Not at $190 per gallon for that product.

@brucedale4465 Жыл бұрын

If you can’t fix it right don’t use foam

@GanderFlight Жыл бұрын

Fixed right is relative to use. This was an experiment. Thanks for watching Bruce!

@JavonSteez Жыл бұрын

I believe it cures and gets hard with oxygen.

@GanderFlight Жыл бұрын

Correct. Can you expand, not sure what this comment is pointing out.

@billybongthornton4285 Жыл бұрын

Why drill holes in the tire when you can use the valve stem 😂😂😂😂

@GanderFlight Жыл бұрын

I tried that on another tire - the foam never cured that way for me.

@Sldejo 2 жыл бұрын

How did I get here?🤔

@GanderFlight 2 жыл бұрын

Rabbithole

@deehuntley9813 Жыл бұрын

@@GanderFlight I'm sure your mother and father had something to do with it😃

@greggory448 11 ай бұрын

Trying to get those wheels off. That transmission axle would be out feeding its own. Probably easier to take the axle real the transmission I used to build those transmissions when I work for the company. peerless gear. A division of the Tecumseh products company. I tested every transmission 100% shift test, inspected. I stayed there for 14 years until they closed. They used to lay us off. For the whole summer, it was the greatest.

@GanderFlight 11 ай бұрын

Thanks for watching!

@rosskstar Жыл бұрын

Nice proof-of-concept trial - i was wondering, thanks. Hacks will be the order of the day in the tribulation we're now entering. Don't forget to gaze at Christ' healing "hidden manna".

@GanderFlight Жыл бұрын

Thanks for watching

@winstonian88 Жыл бұрын

The whole point of a pneumatic tire is flexibility from air compression. Spray foam isn’t flexible. It can’t work in principle.

@GanderFlight Жыл бұрын

Depends on what you're looking to use it for :)

@PinePondCTDevilsHopyard-fy3hj 2 ай бұрын

Do I need flexible on a old wheelbarrow?

@invaderzim_8833 Ай бұрын

Hey, i know how to get more views and attract more attention to myself and my life.. Lets be apart of the problem, and not the solution. Regardless if it works or not. Infecting others with stupidity is never the solution to a better world.