DIY Touchmark Stamp
Рет қаралды 2,461
3 жыл бұрынI attempted to make my own Blacksmith/Bladesmith's touchmark stamp.
You can get these made on CNC by professional services, but I wanted to make my own.
The method I used to make the stencil by printing a stencil using a Brother P-700 label printer and special stencil tape. I then etched the pattern onto my steel black using saline solution and a 12v Car battery charger.
Here are a couple of links made my other KZfaqrs showing the technique. The first one gave me the idea of using the Brother printer, the other is using a dedicated system:
• How to PRINT a STENCIL...
• Video
Here are links to the printer etc. I am not sponsored, it is just to point you in the right direction:
Brother Printer: amzn.to/3rtvGQs
Stencil Tape: amzn.to/2JpqUCk
Diamond Burrs for rotary tool: amzn.to/37NbQHM
Music: Lunch in Paris - Bensound.com License - #2149022
@SmurfMasher 2 жыл бұрын
Your videos are informative and calming.
@WildWillieWarfield 2 жыл бұрын
Interesting project, would a hacksaw give you a cleaner centre line between the characters?
@Ukenick 2 жыл бұрын
Good point and worth a try 👍
@Cobbshobbies 2 жыл бұрын
awesome!
@Ukenick 2 жыл бұрын
Thanks so much
@mikewaterhouse8510 3 жыл бұрын
you did a good job I learnt alot from your problems Thank You
@Ukenick 3 жыл бұрын
Thank you so much. 👍👍
@JimmysCanal 3 жыл бұрын
Perhaps the touchmark isn't as perfect as would been made in a cnc engraver, but it's very well made for handmade! I am sure that as you experimenting with electro-etching soon you will make it better and perhaps smaller for marking more delicate things like jewels or special tools. Well done my friend! Dimitris P.S. For delicate filing you can try use riffler needle files.
@Ukenick 3 жыл бұрын
Thank you my friend
@jensjohansen2205 2 жыл бұрын
Nice job. Not to correct you, but the old alfabet is also known as Futhark. ;)
@Ukenick 2 жыл бұрын
Delighted to be corrected. Thanks so much I had no idea. 👍
KiKiDo
Рет қаралды 3,9 МЛН
Tokparty
Рет қаралды 2,1 МЛН