DIY tractor monitor mount

Рет қаралды 23,366

5 жыл бұрын

my website: benchworks.be/en/diy/
Making a steel mount to fit a monitor in the tractor cab, the main difficulty was to angle the mount towards the driver to avoid screen glare. The previous tractor had hard plastic cab mounts in which you could directly screw the monitor base. This one has soft trim with special mounting holes for such use.
The monitor is for an Einbock row guard system on a chop star weeder, it's needed to input data on the crop size, row spacing, offsets and adjustements etc...

Пікірлер: 41

@AGlimpseInside 5 жыл бұрын

Hey man not really sure how else to get a hold of you but here goes. I have a small KZfaq channel in which I’ve started featuring makers that really inspired me per week. Just wanted to let you know that you are my second injury in this endeavor. And I link your channel in my latest video. Thank you for the inspiration by all means, you have the most amazing shop organizational videos I’ve ever seen. Take care brother, Chris

@terryholdredge6393 5 жыл бұрын

The challenge of subtlety for the Renaissance mind.

@johnshoureas1629 5 жыл бұрын

You are a very talented fabricator. I still miss your woodworking videos, but at least you used some of your woodworking tools to make this bracket.

@Perspectologist 5 жыл бұрын

I really enjoyed this. Seeing the farm technology in action was cool as well as seeing the fabrication process.

@kevinmay7859 5 жыл бұрын

Tim your a talented man and I wish you all the best with your farming business

@KLIDIMARIA 5 жыл бұрын

Another nice work,as always !!! Happy to see your old dog again !!

@PeterPounders 5 жыл бұрын

I knew that even though you weren’t going to do woodworking anymore that you would still have things to make videos for.

@richardshaw3094 5 жыл бұрын

I love your videos. You could make a video of paint drying and I would watch it

@brokenhill8590 5 жыл бұрын

Your a master craftsman .... with metal and wood. Always great videos.

@kiwdwks 5 жыл бұрын

Great job! Totally custom bracket makes all the difference.

@nicklloyd-jones 5 жыл бұрын

Quality work as usual

@lexx71te 5 жыл бұрын

Easy and quick solution.....if there exist a original part it would cost 100€ or more. Nice work

@IEnjoyCreatingVideos 5 жыл бұрын

Good job Timothy! Thanks for sharing the video.👍😎JP

@zorroinhell5549 5 жыл бұрын

My friend, you are still "THE MAN"!

@kaycox5555 5 жыл бұрын

Awesome ingenuity!

@agrifurb 5 жыл бұрын

Nicely done.

@amircogs 5 жыл бұрын

Hello from Pakistan. Your work is great!

@boldureans 5 жыл бұрын

Looking forward to see some woodwork.

@Saventy 5 жыл бұрын

Отличная работа .👍 Выпускай по больше видео.

@michikopka 5 жыл бұрын

claas cam pilot ... normally the müller type displays have a different mounting bracket system.

@derKarl_stp 5 жыл бұрын

nice vid :-) thx for sharing

@sksee882002 5 жыл бұрын

Thanks for it

@cazun8005 5 жыл бұрын

Excelent, has usual !

@Georges-MILLION 5 жыл бұрын

Bon boulot !

@HODYODesign 5 жыл бұрын

Dual screen tractor, too bad those monitors are not 24" wide! Mais Je m'égare... La partie travail du métal de l'atelier semble bien équipée, même si elle ne rivalisepas avec la partie menuiserie.

@maurovisser4359 5 жыл бұрын

Schoon gemaakt man👍

@TK-KingRanch 2 жыл бұрын

Hi, I got the same Monitor, but where I can buy the metal you hook on the motion?Thank you.

@peacekeeper5119 5 жыл бұрын

Nice. I am not a Traktor rider, so how is it with vibrations? I would have expected some rubber with screws both sides to reduce the vibrations, but may that‘s not a trouble ?

@TimothyWilmots 5 жыл бұрын

The tractor has a front axle suspension and the cab is supended as well. Sometimes you get resonance issues with long brackets, but a short one like here shouldn't be a problem.

@lucverbelen5161 5 жыл бұрын

je beheerst inderdaad de kunst om mooie video's te maken - een plezier om naar te kijken. Als je JD te laat geleverd wordt waarom koop je dan geen MF of Fendt :):) (Je ne peux pas résister à te taquiner....)

@TimothyWilmots 5 жыл бұрын

Liever met de hand gaan wieden!

@JW-mx3qg 5 жыл бұрын

Timothy Wilmots : Ah, dat is een goed idee voor je volgende Video!

@lucverbelen5161 5 жыл бұрын

@@TimothyWilmots ik kom helpen !!