DIY Treadmill

No video

DIY Treadmill

Рет қаралды 101,595

Күн бұрын

Learn how to build your own treadmill. Quickly and economically! Let me know if you require any help😊
Materials:
*140mm x 45mm pine ( 2 x 1300mm) side supports
*140mm x 45mm pine (end support high end)
90mm × 45mm pine (end support low end)
*25mm × 3mm tubing (29 × 630mm) tread material
*22mm bearings (to fit inside tubing)
*70mm × 45mm pine (2 × 1020) handrail uprights
*25mm x 2mm tubing (2 × 800mm) (1 × 765mm) handrail
* 25mm pvc elbow connectors (handrail)
* Drink bottle holder (optional)
Fixings:
*20 x 65mm batten screws (fixing pine together)
*58 × 65mm × 6mm bolts with nuts and washers (fixing tubing to pine side supports)
*116 pop 1/8 pop rivets (into tubing to enable bearing not to move from side to side).

Пікірлер: 138

@the_stray_cat Жыл бұрын

finaly! i spent like an hour looking for an Actual guide on how to do this, all the others are more like"watch me build this with no info on measurements or parts described or listed"

@MattLees-Nunan Жыл бұрын

I'm glad to hear it's been of assistance😊

@victorrubahimbya1124 3 жыл бұрын

Wooow you made it look too easy in just 60seconds 👏👏👏

@leandercampos5801 3 жыл бұрын

Awesome bro great job💯🤙❤️🇵🇭

@MattLees-Nunan 3 жыл бұрын

Thank you! Hope it made sense!😀

@99milliion 3 жыл бұрын

My aunt and uncle work with construction a lot so I’m planning to make this (I’m going get help with it 👌)

@MattLees-Nunan 3 жыл бұрын

That's great! Sounds like a nice project for you all😊

@cesarjimenez1117 3 жыл бұрын

Hola excelente trabajo, un cordial saludo desde Nuevo Leon México!!

@MattLees-Nunan 3 жыл бұрын

Hola! Gracias hermano! Buenas suerte con entrenador💪😊

@ItsUrMilkMan 2 жыл бұрын

How much is the total cost? Also, would it work to put a rubberized cover over it more like a treadmill? This would also allow modifications to easily measure distance run.

@MattLees-Nunan 2 жыл бұрын

It costs $200 to make. Yes, I suppose you could try putting a mat over it but you'd have to find a way that it wouldn't hit the sides as you're running along🤔

@hamadaalabyad2717 3 жыл бұрын

Good work bro

@MattLees-Nunan 3 жыл бұрын

Cheers bro!

@carlosfalu-uh9nx Жыл бұрын

Excelente gracias 👌

@MattLees-Nunan Жыл бұрын

Muy bien! De nada😊

@sudheerrajput7971 3 жыл бұрын

Hello sir how are you?? Thanks about all ...please tell me about this treadmill noise ??? I think bearing or pipe shall make too much noise

@MattLees-Nunan 3 жыл бұрын

It does make a bit of noise but it's nothing too crazy😊

@alexeyandreev_ru 3 ай бұрын

What did you do to prevent the tube from bending?

@MattLees-Nunan 3 ай бұрын

Use 3mm pipe tubing

@minhhung7646 2 ай бұрын

I notice u wrote pop rivet in the description yet I don't understand much, can you explain further to me, I'm not professional in this

@MattLees-Nunan 2 ай бұрын

If you type into Google "pop rivet" or go to your local hardware store, they will point you in the right direction🙂 I suggest 1/8 rivets

@minhhung7646 2 ай бұрын

@@MattLees-Nunan thank u

@michalgiers Жыл бұрын

Add leveling system

@MattLees-Nunan Жыл бұрын

Can you please explain a bit more?

@nishantpandey6870 3 жыл бұрын

How long you think this will last, i am asking because i think the bearings where we step while running will damage soon

@MattLees-Nunan 3 жыл бұрын

I run on mine about 3 times a week and haven't had an issue with bearings yet. Are you having trouble with it at the moment?

@jawaring4367 2 жыл бұрын

I wish KZfaq would detect when there are vertical and horizontal bars on videos and upscale the video so it isn't only taking up ten percent of the screen.

@MattLees-Nunan 2 жыл бұрын

Yeah that would be good! I'm not really good with technology and just used my phone, so I'm sorry the quality isn't better

@matteodifilippo2427 3 жыл бұрын

Hi, sorry my bad English but I have a doubt, I don't understand the measurements. If the tubes are 25mm and 3mm thick it means that the internal diameter is 19mm (?), How do the bearings fit if they are 22mm?

@MattLees-Nunan 3 жыл бұрын

25mm is the internal tube measurement👍

@yuriilitvin3306 2 жыл бұрын

@@MattLees-Nunan ok So we have external diameter of the bearing 22mm and internal diameter of the tube 25.... there's still difference

@Techvally 3 жыл бұрын

Now a days. I am thinking about it... that how to make a treadmill at home. so Google brings me in your video. apparently, it seems a good idea. My ping is, it is making much noise while running. I think you could reduce the noise by using a rubber grip.

@MattLees-Nunan 3 жыл бұрын

That's such a good idea! Please try and let me know how it goes😊

@forreal541 3 жыл бұрын

Please I want ask to can one make it possible to control the speed, like starting with walking and may be endup running, everyone can't be running

@MattLees-Nunan 3 жыл бұрын

Yes definitely you can control your speed. How fast you go is determined on how quickly you want to go😊👍

@forreal541 3 жыл бұрын

@@MattLees-Nunan I need it for my mum so I was afraid if it went out of control

@forreal541 3 жыл бұрын

@@MattLees-Nunan be a little more clear

@carsamv 4 жыл бұрын

I like it, it's a great idea and it looks like it's not noisy at all is it? It's amazing I'll start mine as soon as possible.

@MattLees-Nunan 4 жыл бұрын

It makes a little noise but nothing crazy!

@ferologics 2 ай бұрын

the resistance here probably sucks, did you figure out a way to control it?

@MattLees-Nunan 2 ай бұрын

I feel resistance isn't needed since there is an incline

@cosmealcantar9396 Жыл бұрын

Can it hold 250 pounds or more really trying to take the weight off. Will it break during time? And how long will it last before breaking. I know these maybe not built for running, walking is good enough for me. Plus if you can build one for Me how much would you charge? Is $$ 300-400ish sounds good enough for you?

@MattLees-Nunan Жыл бұрын

It will hold 250 pounds as long as you follow the correct materials as labelled in the description. I'm not sure how long it would last...it all depends on how much you use it! I don't make and sell sorry, that's why I've created a video so that you can give it a go yourself😊

@cosmealcantar9396 Жыл бұрын

@@MattLees-Nunan thank you this video will help. I checked that a project like this for carpenter can charge $200-$600 on a small project and can go even go up to 800 high end. Depends how much you worked on it and how many accessories and light weight adding a motor etc etc. Not bad I was willing to buy one. Don't have time and the tools. Might have to rent it or buy them and return them to get my money back. From the tools.

@patgill1904 3 жыл бұрын

Hey Matt, I’m from the states can you tell me the dimensions in ft and inches please? Love the design can’t wait to start

@SilverXT 3 жыл бұрын

There’s plenty of calculators online for you to convert measurements yourself

@clepeterd 2 күн бұрын

@@SilverXTtoo hard... 😅

@joeoconnor6304 9 ай бұрын

Does the 25mm tubing go into the wood side panels to hold weight

@MattLees-Nunan 9 ай бұрын

Hello, the tubing sits over the bearing and the bearing is connected to the wood panels. Hope this helps🙏

@moazzamlxxl 2 жыл бұрын

can we do anything to reduce the sound?

@MattLees-Nunan 2 жыл бұрын

Great question! I'll leave that up to you and your imagination😊

@douglaslee8990 4 жыл бұрын

This is absolutely amazing! I need one of these in my life. Subbed and cant wait for the next cool video.

@giuseppebruno8982 2 жыл бұрын

Hello, do the hoses need to be lubricated after some time? Great project!!!!

@MattLees-Nunan 2 жыл бұрын

Hello, thank you😊 No, I haven't the past 2 years and it's been fine👍

@MyWorG 4 жыл бұрын

Thats really a nice idea to diy that. How does it feel when you run for a longer period of time, 30min+? Ain‘t it pretty harsh on the feet after a while?

@MattLees-Nunan 4 жыл бұрын

It's actually really good. Not harsh on the feet unless you have really thin shoes.

@Cornfather0506 3 жыл бұрын

I’m a big girl how is this on weight bearing, and are you able to just walk on it or do you have to run?

@MattLees-Nunan 3 жыл бұрын

It will definitely be strong enough as long as you have thick enough metal tubing. Yep, most certainly you can walk on it👌

@anandprabhu7226 Жыл бұрын

What is the reasoning to make the curve? Will straight one work? Getting a exact curve on both the sides seems challenging

@MattLees-Nunan Жыл бұрын

Yes, it can be challenging but without the curve, you're unable to go as fast!

@anandprabhu7226 Жыл бұрын

Sorry to ask you a dumb question but what is a pop rivet and which would be a right one for 1 inch tubing?

@anandprabhu7226 Жыл бұрын

I got it thank you. At what distance would you put the rivet from end of the pipe?

@MattLees-Nunan Жыл бұрын

It depends on the width of your bearing really.. It's there to stop the bearing from moving in further down the tubing

@fightermma 3 жыл бұрын

Bro would this break if I ran on this? I'm 328lbs.

@MattLees-Nunan 3 жыл бұрын

Hey bro! Look, if you get tubing that is 3mm thick and have good quality bearings, then no!😊

@joseluispacotapia2625 2 жыл бұрын

What a short measurement all tubes where the bearing goes

@MattLees-Nunan 2 жыл бұрын

22mm bro

@glen4757 3 жыл бұрын

Thank you for this video I will ask my dad to see if he can build this for me

@MattLees-Nunan 3 жыл бұрын

Awesome!

@narasimhamurthyt.s9603 3 жыл бұрын

* If I ordered can I get the T. Mill..? * If so what will be the cost..? I'm staying in Bangalore. Karnataka ...India

@robertobyrd1895 3 жыл бұрын

Looks great... what is there a way to make it more quiet, I live in apartment building therefore I have to pay attention to the noise

@MattLees-Nunan 3 жыл бұрын

Hmmm🤔 not sure! Maybe you can tell your neighbours to play some music👌

@1sonia 3 жыл бұрын

Exercise bike ✌️

@TimpBizkit 3 жыл бұрын

Not sure, float it on some large neodymium magnets?

@muditsrivastav84 3 жыл бұрын

Definitly a neat job.

@MattLees-Nunan 3 жыл бұрын

Thank you!

@lufeacbo8 2 жыл бұрын

👏

@golfgirl0214 4 жыл бұрын

Cool!!

@amanahmad3516 3 жыл бұрын

What should take Iron pipe or steel pipe

@MattLees-Nunan 3 жыл бұрын

Steel pipe bro😊

@amanahmad3516 3 жыл бұрын

@@MattLees-Nunan can we take iron pipe for more strength and for heavy person like 70 kg

@MattLees-Nunan 3 жыл бұрын

@@amanahmad3516 I can't see why not🤔👊

@micky705 5 ай бұрын

hi can PVC pipe hold our body weight

@MattLees-Nunan 5 ай бұрын

Hello, I wouldn't recommend it. If it was thick pvc then maybe but I can't give you an answer on that unfortunately.

@aldotrinidad7877 3 жыл бұрын

How many pipes did you use thanks!

@MattLees-Nunan 3 жыл бұрын

From memory 23🤔

@jonathansebastian8421 3 жыл бұрын

*edit Hi Matt, are your bearings flush/tight within the inner diameter of your tubing? I'm building my skillmill right now and the bearings are a little loose inside the pipes.

@MattLees-Nunan 3 жыл бұрын

Hi Jonathan! If they are a little loose then try putting some electrical tape around the bearing so it is tight around the tubing. In the movie you'll see that I put pop rivets on each side...This will stop it from hitting sides. Does this help?

@jonathansebastian8421 3 жыл бұрын

@@MattLees-Nunan Thanks for the swift response. The tubing I have is 1" OD, so I used 1.25" OD fender washers. Unfortunately, they are loose as well since nothing "pushes" them against the pipe openings like your rivets do. I'll think of a solution and try using electrical tape. Keep you posted!

@MattLees-Nunan 3 жыл бұрын

@@jonathansebastian8421 Look forward to hearing what you come up with!😁

@condore962 3 жыл бұрын

would pvc pipe work?

@MattLees-Nunan 3 жыл бұрын

Let's stick to 3mm metal tubing🤙

@jackfellher7574 3 жыл бұрын

I don't know about the distance measurement of each bearing

@MattLees-Nunan 3 жыл бұрын

Oh ok, sorry could you please elaborate a little more so I can answer the question?😊

@jackfellher7574 3 жыл бұрын

@@MattLees-Nunan how much is the distance between bearings? so they don't rub against the jogging tubes.

@MattLees-Nunan 3 жыл бұрын

@@jackfellher7574 ok, now I get it😊 10mm from each end. That's the reason for the pop rivets...so the bearing doesn't come out the side👍

@davidclausen4271 3 жыл бұрын

Video is in portrait mode, why not in landscape. Can't see all of the details in the video. Too small

@MattLees-Nunan 3 жыл бұрын

Yeah that must be annoying. To be honest, I didn't know how to get it off that mode. This is the first time I've ever made videos and still learning. They've gotten better since this one😅

@joeoconnor6304 9 ай бұрын

Hi what part goes into the wood panel at side to hold the weight

@MattLees-Nunan 6 ай бұрын

Hi Joe, you'll need to put the 6mm x 70mm bolt through the bearing and tighten the nut on each side of the panel. I hope that makes sense?

@surryysurryy8904 3 жыл бұрын

Perfect I wish I have that

@Jais271 3 жыл бұрын

Great job! Are you able to sprint on this?

@Jais271 3 жыл бұрын

And, how did you mimic the curve on both pieces? Did you use one as a template, or did you measure the start, middle, and end for both and then bend the pipe accordingly

@MattLees-Nunan 3 жыл бұрын

Thank you😊 Yep!! Sprinting is fine, that's what the curve's purpose is👍

@MattLees-Nunan 3 жыл бұрын

@@Jais271 I curved the pipe as a template and then measured each one as I went along. You could probably just drill through both pieces at once but I wasn't sure how straight I could drill down, so just took the extra time to be sure!

@Ngan.marianguyen 3 жыл бұрын

So so cool omg 😩🙌🏽🙌🏽👏🏽👍🏽

@MattLees-Nunan 3 жыл бұрын

Thank you😁

@mohd4ns 2 жыл бұрын

Hi I'm intrusting Can you give me magerment detiles

@MattLees-Nunan 2 жыл бұрын

That's great man! The measurements are in the description🙌

@carsamv 4 жыл бұрын

After doing it, do you think that the pot rivets are necessary? I'm asking it you because the two side supports won't let the bearings move. Or what do you think?

@MattLees-Nunan 4 жыл бұрын

Yeah probably not completely necasary😊

@muditsrivastav84 3 жыл бұрын

Can you share the dimensions of all components Please. TYIA

@MattLees-Nunan 3 жыл бұрын

Hi! In the description there should be a list of all materials. Hope this helps!

@muditsrivastav84 3 жыл бұрын

@@MattLees-Nunan Thank you . That certainly is helpful, pardon my oversight.👍👍👍

@MattLees-Nunan 3 жыл бұрын

@@muditsrivastav84 Brilliant! No worries my bro😊

@maurovieira9005 Ай бұрын

Olá boa noite gostaria de saber as medidas dos canos e dos rolamentos 😊

@MattLees-Nunan 15 күн бұрын

Hola! En la descripción del video😊

@maurovieira9005 15 күн бұрын

@@MattLees-Nunan obrigado amigo

@joeamez7041 3 жыл бұрын

Great idea. Do you specs for what I need in to purchase and dimensions in writing. I would like to make one for son and daughter thanks

@MattLees-Nunan 3 жыл бұрын

Yes sure!😊 The information is all in the description. Let me know how you go!😁

@jayaprakashdash6853 3 жыл бұрын

Pipe and bearing size in inch, Please.

@MattLees-Nunan Жыл бұрын

Hi, all materials should be in the description😊

@marcoscoiote6823 3 жыл бұрын

Parabéns, excelente 👏👏👏

@MattLees-Nunan 3 жыл бұрын

Gracias! Me canta que le gusta hermano!

@santacruz753951 3 жыл бұрын

Excuse me, can you make a video of where you use the rivets please

@MattLees-Nunan 3 жыл бұрын

Hi bro, the rivets don't go into the bearing itself. They go next to it to act as a stopper so the bearings don't pull through and hit the side timbers😊