L200 MN Mitsubishi Triton tub removal, step by step guide anyone can do in their backyard. How to remove the tub.
Пікірлер: 43
@MRicciardi4 жыл бұрын
Brilliant. Thanks for taking the time and going through the little details such as the clip on the fuel latch thing. I feel brave enough to remove mine now. Cheers mate!
@joshsparkman20604 жыл бұрын
No worries mate i hope it helps 👌 cheers for the support
@myvideotablemyvideotable5283 жыл бұрын
was looking for a video exactly on this. Cheers
@willshirley38304 жыл бұрын
Siiiiiiick! Removing my Hilux tub this weekend. Fingers crossed it isn't too different! Thanks for the helpful video bro
@joshsparkman20604 жыл бұрын
Yeah it should pretty much be the same i recon, cheers for watching mate
@jackhudson22273 жыл бұрын
you’re a legend! cheers boss
@laurencebeasley86603 жыл бұрын
I removed the fuel filler door catch by releasing the catch from behind with a straight screwdriver on the passenger side then the driver side with a small bent tip pry bar and then it comes out intact.
@gueroxii47623 ай бұрын
Hey mate I know this was four years ago, but once you got the fuel cap actuator off, it just dangles there and traces back into the car, what did you do with it, cut it off or trace it out and remove it all properly
@johnrobson97802 жыл бұрын
Will a MR tub and tailgate fit a ML/ MN Josh can you let me know please
@huggsempire48311 ай бұрын
Hey what size tray did you end up putting on this
@TheFixxxer113 жыл бұрын
Thanks 😊
@duane12345614 жыл бұрын
Great video thanks
@joshsparkman20603 жыл бұрын
No worries 😁
@nigelstiles50074 жыл бұрын
Really helpful mate. Cheers 👍 You may know,is it possible for me to put ml tub on mn chassis . I’m about to do this and have heard there a direct bolt up. Thought you may know if this is true? Cheers
@joshsparkman20604 жыл бұрын
Im not 100% sure, but im gonna say yes. A guy bought something off me a while back with an ml triton and he had an mn tub. Also when we built the tray for the white mn we have, we measured the brackets on the tray off my blue ML and the mounting dimensions are the same. Let me know how you go mate 👌
@nigelstiles50074 жыл бұрын
Will let you know how it goes👍 cheers again for the advice mate✌️
@mitchellboyd52564 жыл бұрын
Hi just wondering who made the tray and what did it cost, im contemplating one that style for my 2019 MR Triton, Cheers 👍
@joshsparkman20604 жыл бұрын
We made it ourselves in the backyard with the bosses welder. It cost $800 in materials, and we used a bunch of free recycled steel. If we didn't use the free stuff and bought steel instead, it woulda been like $1400
@stedenyland3 жыл бұрын
Would love to see an install follow up video.
@joshsparkman20603 жыл бұрын
Im sooo close, a few weeks away from building another tray. It'll be a 5 part video series. Part 1 - building the tray Part 2 - installing it Part 3 - canopy fitout/12v Part 4 - roof rack build Part 5 - will be a wheel carrier, maybe some pull out draws, and the total cost of the build. Veryy keen to start soon, just need the $$ haha
@jonnienglish9194 жыл бұрын
Thanks man
@joshsparkman20603 жыл бұрын
All good 😁
@liamking46982 жыл бұрын
Hey mate, great video, I have a 2018 mq triton, am about to mount my tray, I was wondering if the stock mounts are already level? Will need mounts need to be made or can the new tray be bolted straight down? Cheers
@joshsparkman20602 жыл бұрын
Hey mate, im unsure about the MQ models.. but i know the ML/MN models, the rear of the tray is like 25mm ish lower than the front.. we went to the local alloy place and bought some 25mm aluminium blocks/offcuts for like $5 and they work sweet as
@liamking46982 жыл бұрын
@@joshsparkman2060 thanks heaps for the reply mate, appreciate it a lot 👍🏼
@-----itsaspear43223 жыл бұрын
Thanks mate, gonna pay someone to do this shit, just wanted to see what it would be like for them.
@jamesonmontgomery42224 жыл бұрын
Where did you get the tray that you put on?
@joshsparkman20604 жыл бұрын
We made it ourselves. We didn't get it on video, but we plan to make another in a few months and ill record it all
@kylegreen9984 жыл бұрын
Good Video!! Are you going to do a installation on the tray?
@joshsparkman20604 жыл бұрын
I didnt get much on the tray because its pretty straight forward. But, if theres enough interest i can make one on tips and tricks?
@kylegreen9984 жыл бұрын
@@joshsparkman2060 All good, Keeps the vids flowing tbere actually really fun to watch
@anuvadave4 жыл бұрын
Hectic 4x4 is ml tub swap essentially the same??
@joshsparkman20604 жыл бұрын
Exactly the same mate. Did mine 2 years ago
@joshsparkman20604 жыл бұрын
Ohh do you mean will an ML tub fit on an MN? Yeah ive seen it done. I assume it'll sit right on
@anuvadave4 жыл бұрын
hectic 4x4 nah - replacing bare ml tub with another tub that has drawers and fibreglass canopy installed. Hopefully I can leave drawers and canopy attached for the install 🤞
@anuvadave4 жыл бұрын
hectic 4x4 cheers for the nice vid and info mate.
@joshsparkman20604 жыл бұрын
All the best mate 👌
@daj4ckelnz3 жыл бұрын
What does this do? Make it lighter =faster?
@joshsparkman20603 жыл бұрын
The 1st part of the process of installing a tray
@liamhenderson57483 жыл бұрын
Hey mate who made your tray
@joshsparkman20603 жыл бұрын
Made it ourselve, im making another one soon hopfully with a video on it. Just need to find timee