No video
DIY Ultimate Cornhole Boards with lights and speakers
Рет қаралды 167,943
Күн бұрынEasy Cornhole Board Plans:
www.oxinthesho...
This is the Ultimate tailgater sport fan cornhole boards with a little added bonus. I have wanted to make these for a while now and I finally got around to them. I think they turned out awesome. Since the boards are engaved we had to use a selfleveling countertop epoxy so they would still work like they are supposed to. I hope you enjoy the video and think about subscribing and clicking that like button.
/ oxintheshop
www.oxinthesho...
/ oxintheshop
/ oxintheshop
Javi’s Woodshop
/ @javiunboxed
Part Time Cameraman
/ therealgoatpro
CornHole Board stuff
Lights amzn.to/2wtlpGd
Countertop Epoxy amzn.to/2wt0jHZ
V bit amzn.to/2wsMN7e
Bags: amzn.to/2Dw2weK
Lights: amzn.to/32qLI3x
Scoretower: amzn.to/3epw0ru
Tools:
Sawstop: amzn.to/3a47quW
Irwin Clamps: amzn.to/3ftBy5y
Dewalt Drill combo: amzn.to/3aLieOt
Grizzly Bandsaw: amzn.to/34Nl5oz
Dewalt Miter Saw: amzn.to/385xe81
Festool Dust Collector: amzn.to/3dzfbLu
Kreg Jig: amzn.to/2SylbKS
Small Kreg Screw box: amzn.to/2Hjoe4c
Bulk Kreg Screws: amzn.to/2P1DZkX
Ryobi Jigsaw: amzn.to/3cGt89B
Music:
1st song
Rock Angel by Joakim Karud / joakimkarud Creative Commons - Attribution-ShareAlike 3.0 Unported- CC BY-SA 3.0 creativecommons....
Music provided by Audio Library • Video
2nd song
JPB - High [NCS Release] • JPB - High | Trap | NC...
SoundCloud / anis-jay
Facebook / jayprodbeatz
Twitter / gtaanis
Instagram / gtaanis
3rd song
Life Is by Cosimo Fogg (201) / cosimo-fogg
Creative Commons - Attribution 3.0 Unported- CC BY 3.0 creativecommons....
Music provided by Audio Library • Life Is - Cosimo Fogg ...
4th song
We Are One by Vexento / vexento / vexento
Music provided by Audio Library • We Are One - Vexento (...
Tools and Video Equipment
Easy Wood Tool Rougher amzn.to/2sJWCAr
Easy Wood Tool Finisher amzn.to/2uO9qm4
Easy Wood Tool Detailer amzn.to/2utVKx0
Nova Lathe Chuck amzn.to/2stp8lO
Dewalt Miter Saw amzn.to/2nVIi4Q
Grizzly Bandsaw amzn.to/2nVA5h5
Dewalt Planer amzn.to/2mGloOS
Grizzly Drill Press amzn.to/2nYnV7m
Dust Deputy Cyclone amzn.to/2mGfCgh
Bosch Router amzn.to/2nlO3Wz
Dewalt Drill Combo amzn.to/2n7pdYS
Delta Table Saw amzn.to/2n7sLdD
Ryobi Brad Nailer amzn.to/2nqWbGV
Irwin Clamp amzn.to/2nYs2QZ
DJI Phantom 3 amzn.to/2n7qzTx
GoPro Hero LCD amzn.to/2n7EKrx
Disclaimer: This video contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. Thank you for your support
@jeffhenderson3318 Жыл бұрын
Incredible workmanship! I just made two boards with UGA laminates, lights for the holes and 2 Altec Lansing paired Bluetooth built in speakers. I’m throwing both boards away after seeing your two boards…
@SniperChris18 6 жыл бұрын
Just stumbled on this video. Being a Georgia boy myself I had to check it out. Gotta say those are the most well thought out and most insanely awesome set I’ve ever seen!.... GO DAWGS!
@oxintheshop 6 жыл бұрын
Thanks Chris I’m glad you like them. Go dawgs sic em
@dbutler27 6 жыл бұрын
Probably one of the nicest sets of boards I hace ever seen
@oxintheshop 6 жыл бұрын
Thanks and that is awesome I’m glad you think that. I was trying to just make some no one has seen and I think/hope that’s what I did.
@rayv882 4 жыл бұрын
Dang that's the nicest set of cornhole boards I've seen so far, excellent job bud!
@oxintheshop 4 жыл бұрын
Thanks so much ray thanks for watching
@tonymj1973 4 жыл бұрын
Just one word.................Beautiful!!! Awesome Job!!
@oxintheshop 4 жыл бұрын
Thank you tony
@toolman101476 6 жыл бұрын
Everybodys like yea I can build that......then he whips out the cnc machine.
@oxintheshop 6 жыл бұрын
yea had to step it up a notch
@ivancarrejo6551 6 жыл бұрын
a notch???..like 100 notches!!!..lol
@thejourniganadventures7391 5 жыл бұрын
toolman101476 right 😂 I was thinking the same thing.
@spydergs07 5 жыл бұрын
You can get small shop CNC machines for like $6k. They are not that expensive.
@frankborja25 5 жыл бұрын
Ox In The Shop....a notch? that kind of work is not in the ordinary guy's orbit...
@bat2ball12 2 жыл бұрын
I didn’t know any Georgia fans had the brain capacity to do something like this. Good to see
@rustynails68 10 сағат бұрын
OVER THE TOP
@TheMuzShop 7 жыл бұрын
Sweet Drew!! Lots of fun with Cornhole as it is but with the way you made them , the look the light and the music, just adds to the excitement. Great job Bro.....
@devinrichter9840 7 жыл бұрын
Drew, you should have.....just kidding. Honestly, the coolest set of corn hole boards I've seen yet. I love the video! But kind of hate it at the same time....it adds a project to my ever growing list of projects. When I make mine, I'm hoping they look half as good as these do. Awesome job!
@oxintheshop 7 жыл бұрын
thanks Devin, I am glad you liked the video and i look forward to seeing the ones you build. thanks for your support as always
@gratefulRed69 3 жыл бұрын
that CNC design/operation was pretty amazing. As a DIY guy...got to admit those CNC machines take projects to a whole different level. I haven't really looked into the cost of them, but i such a idiot with computers (yes, I'm a bit older) I have doubts I could ever get the graphics/design part of it down well enough to actually make something cool with it. Awesome boards though !
@ManCrafting 7 жыл бұрын
Pretty sweet cornhole boards. Love the storage compartment and the led/music upgrade. The design wether you're a UGA fan or not should be appreciated. That style could be made with any team.
@oxintheshop 7 жыл бұрын
ManCraftingTM thanks chad I always enjoy reading your comments because they are unbiased and read in a way that is appreciating the work as well as helping others appreciating it as well.
@dimensionswoodworks 6 жыл бұрын
Everyone always has something to say, no matter what team you do!!! #RTR🐘🐘🐘. lol 😂
@lisacooper6681 6 жыл бұрын
The best design I’ve seen yet. Better than my cornhole board builds. Great job!
@oxintheshop 6 жыл бұрын
lol Im sorry. Im sure yours are awesome too. thanks for watching
@inspiringbuilds 3 жыл бұрын
Awesome boards and the CNC machine really finished them off nicely! Subscribed!
@oxintheshop 3 жыл бұрын
Thanks glad to have you
@rickybobbyracing9106 2 жыл бұрын
That's a nice Green Bay packers board ;)
@oxintheshop 2 жыл бұрын
Lol your funny go dawgs
@vincepresto759 5 жыл бұрын
LOVIT ! Better then the few I’ve made with LED LIGHTS but the CNC just went over the Top Dude ! Thx’s for Sharing from St Joseph, MO.
@oxintheshop 5 жыл бұрын
The cnc was intended to be over the top. Thanks for watching
@frankborja25 5 жыл бұрын
if those were my boards they would be hanging on the living room wall! great work!
@oxintheshop 5 жыл бұрын
Lol thanks
@BearCreekWoodworking 7 жыл бұрын
Great Job Drew! Nice to see you using Jimmy's Ice Pick! I like the epoxy top, and the playing music when you score is an awesome idea!
@oxintheshop 7 жыл бұрын
Bear Creek Woodworking thanks and yes I use my diresta ice pick all the time
@42Fab 7 жыл бұрын
Looking great man. Just to jump on the impending bandwagon: would have looked better with That epoxy top looks immaculate.
@oxintheshop 7 жыл бұрын
42Fab - Metalworking and Multi-Medium Fabrication thanks Richard yes they turned out awesome
@thebbqalchemist 6 жыл бұрын
Those boards are sick! YOU took that to "anubba lebbal "!
@oxintheshop 6 жыл бұрын
haha no sure what that means exactly but thanks
@christopherd.337 2 жыл бұрын
That's awesome Cornhole board. Where you get sound box? And was it motion activated when bag went in hole? I'm definitely going have try make a Cornhole board similar to yours. Great job 👍
@dimensionswoodworks 6 жыл бұрын
Good job Drew! That CNC is an awesome tool to have!
@oxintheshop 6 жыл бұрын
thanks and yes it does come in handy
@peterthayer1819 4 жыл бұрын
All the cnc, epoxy stuff and speakers and then plywood legs. Pop for the $8 for solid wood legs.
@leggettswoodworx4143 6 жыл бұрын
Those boards are freaking awesome!!! Gotta step my game up now!!! Great job!!!
@oxintheshop 6 жыл бұрын
thanks let me know what you come up with
@markmoody4699 5 жыл бұрын
Was going to ask same thing..need to find them anyway
@jb_woodcraft 7 жыл бұрын
Awesome build and video! Best cornhole boards I've ever seen! Go Dawgs!
@oxintheshop 7 жыл бұрын
thanks that is awesome. share the video to all your fellow DAWG friends GOOOOO DAWGS!!!!! SIC EM!!!!! WOOOOF WOOOOOF WOOOOOF
@Rgarcia713 6 жыл бұрын
One of The nicest sets I’ve ever seen
@oxintheshop 6 жыл бұрын
Thanks
@phillja 7 жыл бұрын
Great job! Now it is wide open to other team designs.
@oxintheshop 7 жыл бұрын
JK's Timber Scraps thanks and yes that is true
@aaronb483 6 жыл бұрын
Nice editing. Love your choice of music. This compliment from 60+ old man.
@oxintheshop 6 жыл бұрын
thanks Dale thats awesome
@gordygray1738 2 жыл бұрын
Amazing job!!! I wish I could have a CNC machine like yours…
@MikeKapotsy 7 жыл бұрын
Nice job Drew! Cool project and outcome.
@oxintheshop 7 жыл бұрын
Mike Kapotsy thanks
@AP-zk2hj 4 жыл бұрын
Hell yea! Nice build! Best part though, eye of the tiger followed by huge miss 😂😂😂
@oxintheshop 4 жыл бұрын
Lol that is a good part thank for watching
@lelavender 6 жыл бұрын
What a a beautiful set! You could make a nice side business. I would definitely buy a Tennessee set.
@oxintheshop 6 жыл бұрын
Tenn....... im sorry. but yes I do sell them let me know if you want one
@jerrystorm3199 3 жыл бұрын
@@oxintheshop how much do you sell them for? Thx
@dhirmer 5 жыл бұрын
Holy pocket holes Batman!!
@oxintheshop 5 жыл бұрын
Lol yup
@enzoakland34 4 жыл бұрын
Those are amazing. Great job.
@oxintheshop 4 жыл бұрын
Thanks glad you like them go Dawgs
@WindsorCraftDesigns 6 жыл бұрын
Great design and build.
@oxintheshop 6 жыл бұрын
thanks chris. they are awesome
@nealonswoodentreasures9273 7 жыл бұрын
Good job Drew They turned out great
@oxintheshop 7 жыл бұрын
Nealons Wooden Treasures thanks Steve I think so as well
@spydergs07 5 жыл бұрын
What sensor was that for the music?
@andymurray1573 3 жыл бұрын
That's SWEET except the PACKERS don't have a bulldog logo. LOL
@oxintheshop 3 жыл бұрын
Lol it is their new logo for the season
@jesusontiveros19 4 жыл бұрын
WOW that's the best I have seen so far.🔥💯👌👍✔🙏
@oxintheshop 4 жыл бұрын
Thanks as far as I know it is the first of its kind
@lukebeenken1066 4 жыл бұрын
Beautiful boards. What did you think of the epoxy finish as far as play is concerned? Some people say it’s too fast and I’m curious what you think
@oxintheshop 4 жыл бұрын
It fast at all. At first it doesn’t slide one bit but after you play and it gets powder from the bags it works great
@Studio69Fan 7 жыл бұрын
Hell yeah that's cool! Nice job! You might end up a very busy man, making these.
@oxintheshop 7 жыл бұрын
Paul Granger that and yea idk about being busy because the price of these are a little crazy for corn hole boards
@GEORGIAOUTLAW317 6 жыл бұрын
Ox In The Shop what would be the price for these?
@iwmwtcm 3 жыл бұрын
Great job, very professional and creative...except...no eye protection???
@DixonButts58 7 жыл бұрын
Awesome on so many levels! GO DAWGS
@oxintheshop 7 жыл бұрын
thanks so much Ross and yes GOOOOO DAWGSSS!!!!!
@brgarrison418 4 жыл бұрын
I Agree ........ GO DAWGS !!!!!!!!
@dutchwalters4450 5 жыл бұрын
Outstanding.
@oxintheshop 5 жыл бұрын
Thanks glad u like it
@krikirk 5 жыл бұрын
Where did you get the speaker? I'd love to add it to my boards
@jodaddyswoodshop331 4 жыл бұрын
????? Any update?? I would love to know what’re you got the sensor!
@alanirizarry118 2 жыл бұрын
Ditto would love to know where to get sensor music box
@mallardboy23 5 жыл бұрын
Glory glory to ol Georgia!!
@oxintheshop 5 жыл бұрын
Go dawgs
@williamjamesrapp7356 4 жыл бұрын
Neat IDEA except it should be BLUE AND GOLD with a big ND and a Fighting Leprechaun
@oxintheshop 4 жыл бұрын
Lol ND we have had their number the last couple times
@goldblue4883 4 жыл бұрын
I need a Notre Dame pair.
@oxintheshop 4 жыл бұрын
Email me through my website and we can talk about design and price
@commercialartservicesartwo3133 4 жыл бұрын
Dude - awesome.
@oxintheshop 4 жыл бұрын
Thanks glad you like it
@kelliebevans6567 7 жыл бұрын
Best cornhole boards EVER! GO DAWGS! ❤️🖤
@oxintheshop 7 жыл бұрын
Kellie Bevans thanks and go dawgs
@jentroncale2085 4 жыл бұрын
These are so cool! What a great idea to use the CNC machine! Just curious though how heavy are these!?
@oxintheshop 4 жыл бұрын
Lol Jen they are not light at all. Not sure on the weight exactly but they are a good bit heavier than the regular boards
@ivancarrejo6551 6 жыл бұрын
daaayyyyuuummmm...those are badass!!! good job!!
@oxintheshop 6 жыл бұрын
thank you and thanks for watching the video
@Day_All_Day 5 жыл бұрын
nice work brother with the cnc work!
@oxintheshop 5 жыл бұрын
Thanks
@garynorthcutt Жыл бұрын
Very nice work Drew. would you please share where you got the speaker and fight song from.
@oxintheshop 8 ай бұрын
So the speaker didn’t work that much so I didn’t post where to get
@Centsword 3 жыл бұрын
So sick
@alexanderthompson95 5 жыл бұрын
Go dawgs just got you a new subscriber!!!
@oxintheshop 5 жыл бұрын
Thanks Alexander glad to have you🐶
@thehamlinwoodshop 7 жыл бұрын
Great build. Thanks for the video!
@oxintheshop 7 жыл бұрын
The Hamlin Woodshop thanks for watching
@p.s.9702 5 жыл бұрын
Nice boards . But you could put handles to carry them but awesome also.
@oxintheshop 5 жыл бұрын
That would be a good idea
@chuckles7478 3 жыл бұрын
Go Dawgs!!
@oxintheshop 3 жыл бұрын
Sic em
@valdecirjesus236 6 жыл бұрын
Congratulation for your beautiful job
@oxintheshop 6 жыл бұрын
thanks for the comment and for watching
@justinwilson8230 4 жыл бұрын
Go Dawgs!
@oxintheshop 4 жыл бұрын
Go Dawgs
@phongtran6367 11 ай бұрын
Amazing work! Where did you get the sound module? I didn't see the link in the description. Thanks.
@oxintheshop 8 ай бұрын
I can’t remember but it didn’t work that great
@masonjones8905 3 жыл бұрын
Amazing
@oxintheshop 3 жыл бұрын
Thanks mason
@jacobnorman9492 7 жыл бұрын
How bout them Dawgs!?!?!?!Super sweet build!!! Love the "Glory to Old Georgia" feature. Go Dawgs!!!
@oxintheshop 7 жыл бұрын
thanks Jacob graded you like the build
@jonblake7696 6 жыл бұрын
very nice looking set of boards. im wondering how you dealt with all the rough edges after the cnc machine finished? i do alot of routing and always struggle with that. thanks
@oxintheshop 6 жыл бұрын
The v bit cleaned everything up pretty good. But for the couple little spot I hit them with 220 just to knock off the bur. where the arches were a little more rough due to the bit not being the sharpest i used a razor to clean it up. Hope this help but when router a good quality bit goes a long way. thanks for the comment and for watching
@brandond6628 4 жыл бұрын
Just sent in a request. Looking forward to hearing back!
@jveetv7369 Жыл бұрын
where did you get the motion sensor and sound machine? Did not see that listed
@ryanmetz100 5 жыл бұрын
duuuude those are awesome!! go dawgs!!
@oxintheshop 5 жыл бұрын
Thanks
@SouthernGinger 7 жыл бұрын
Turned out great dude!!
@oxintheshop 7 жыл бұрын
Southern Ginger Workshop thanks Zach
@DavidEricPrates 7 жыл бұрын
Turned out great man!
@oxintheshop 7 жыл бұрын
thanks and thanks for watching
@BronkBuilt 6 жыл бұрын
That is really, really cool.
@oxintheshop 6 жыл бұрын
thanks
@stewartfields7266 5 жыл бұрын
Great looking top but you skimmped on the underneath side. Finish sanding all of it and treat the underneath side with paint or a single coat of poly, just to protect the wood. With the CNC machine you can definitely take cornhole tops to the next level. Beautiful....finish it out tho.
@oxintheshop 5 жыл бұрын
Yea I understand but it was so much work I was ready to get them done lol
@stewartfields7266 5 жыл бұрын
@@oxintheshop lol......I understand that. It's a beautiful set tho, you did a great job with it. I'd love one but being on disability, there's no way I could afford something so customized as that. What's something like that run cost wise? I'm sure how detailed of the top is and how much the CNC has to be ran affects the price allot. Again, not busting your chops, its just such a beautiful top that if finished completely, would be the Rolls Royce of cornhole sets. Great job !!! I love to play, just dont get to as much as I'd like to with all the medical issues I got going on right now. Any who, again, beautiful set.
@donpalm7012 2 жыл бұрын
Where did you get the sound box from? I’d like to get something like that.
@DoItProjects 6 жыл бұрын
Immediate subscribe! Great channel, man!
@oxintheshop 6 жыл бұрын
thank you thats awesome
@tom86828682 4 жыл бұрын
Where did you find that sensor for the music. Thats an amazing touch.
@danreal52 5 жыл бұрын
Still sick! I won’t be doing the same. Damn
@oxintheshop 5 жыл бұрын
Thanks I guess??? Not sure I understand
@jacobdout 5 жыл бұрын
These are absolutely great cornhole boards. However, I was wondering why you might not have used red epoxy to fill in the design and then just sand/plane/chisel all of the excess off of the black?
@oxintheshop 5 жыл бұрын
That is an idea but I just want the wood to show didn’t want to fill that up with red. That would have been a lot of red. The gs yes could be red but I didn’t want the stadium dawg or arch to be red. If you make one and do that I would look to see it tho.
@captainron8231 5 жыл бұрын
Nice work..
@oxintheshop 5 жыл бұрын
Thanks CAP!
@TNSoldier88 4 жыл бұрын
Is the speaker actually triggered by the bag going in or is that just computer editing? If it's the former I would love to know how you did that
@oxintheshop 4 жыл бұрын
It is triggered by the bag but only worked half/ quarter of the time
@josephruch4154 2 жыл бұрын
Is it also possible to purchase the cnc laser/router file?
@eddiewilliams883 3 жыл бұрын
Is the epoxy to slick when playing? Does the bags slide back down the boards?
@oxintheshop 3 жыл бұрын
Actually not slick enough. You would think it would be but poly is more slick
@dennisdaudet677 2 жыл бұрын
Where do you find the cheer sound for when the bag goes in the hole
@oxintheshop 2 жыл бұрын
Can’t remember I think I downloaded it off KZfaq maybe
@portalwoodworks8499 7 жыл бұрын
They look great Drew, would have been better with Gators on them.
@oxintheshop 7 жыл бұрын
David Jones thanks and you just keep wish on the gator thing
@thesecond6175 6 жыл бұрын
If he built Gator boards he’d have to grow a mullet.
@Junkyard129 7 жыл бұрын
Do you have the link to where you got the hole sound system?
@oxintheshop 7 жыл бұрын
I do not have it but you can find it or something similar with google search. these were a little tricky to get working right tho.
@billygordon9874 5 жыл бұрын
@@oxintheshop You don't have the link to ware you got the sound system? But you have it and installed it?
@mfwoodshop 7 жыл бұрын
Nice work
@oxintheshop 7 жыл бұрын
Mike Fulton thanks
@adrianavicari4804 3 жыл бұрын
Love your videos. Can you tell me what kind of CNC router you have ?
@oxintheshop 3 жыл бұрын
Garageworx cnc
@LarryLanham2008 3 жыл бұрын
Curious, do you have to have any special licensing agreement with NCAA or SEC, NFL, etc. to resale?? how does that work exactly? I feel like when you buy the decal you've paid your part, but I've also heard the argument when you do resale they still may want a piece of the pie. thanks
@59672270 6 жыл бұрын
great job!,go dawgs!
@oxintheshop 6 жыл бұрын
thanks go dawgs
@jeffreydtube 5 жыл бұрын
Did you do 2 epoxy pours or a single pour? Looks great!
@oxintheshop 5 жыл бұрын
I did a pour for each board and I think I had to pour a little on each after than to raise it up enough. Thanks
@jeffreydtube 5 жыл бұрын
@@oxintheshopDid you pour the vcarved sections first, let it cure, then pour/brush on the top or was it all one pour?
@Djvickers20 6 жыл бұрын
Any chance you would do a video on how you did the design with your cnc, or share the g code?
@oxintheshop 6 жыл бұрын
yes I could do a video on that
@carivera3638 6 жыл бұрын
What/how did you mix that clear I've built some but can't get that high gloss like that thanks awesome build👏🏽🤙🏽
@oxintheshop 6 жыл бұрын
I just mixed it up like the jugs said and poured it on. I have a link in description where you can buy it
@stevenswiatek6268 3 жыл бұрын
what brand cnc is that??? Awesome job!
@oxintheshop 3 жыл бұрын
Garageworx cnc but I don’t think he makes them anymore
@FuzzyNaval 6 жыл бұрын
Awesome boards! Where do you find the motion activated audio box that plays the fight song?
@oxintheshop 6 жыл бұрын
I would not recommend the ones I used because it doesn't work everytime like it should
@aceydover1782 4 жыл бұрын
How did you clamp cow hole boards down on CNC?
@oxintheshop 4 жыл бұрын
With wedges
@kylenorton521 6 жыл бұрын
Great video! What did you use to make the fight don't play? I don't see a link for that- unless I missed it
@oxintheshop 6 жыл бұрын
I used a machine from a tailgating supply website but I would not use it again doesn't work as well as I want it to
@hookandtimberoutdoors8335 4 жыл бұрын
Doesn't look like you will win any championships with those boards.
@oxintheshop 4 жыл бұрын
🤣🤨
@dwayne4385 5 жыл бұрын
How much do you change to build a set? Those are amazing
@oxintheshop 5 жыл бұрын
A lot message on my website if interested they ain’t cheap
@ramonrascon1476 3 жыл бұрын
Do u still do cornhole boards? Would like to c how much u would charge to make me a set!
@shaukeki 5 жыл бұрын
Red lights in the eyeballs. You need...red LEDs...in the eyeballs
@oxintheshop 5 жыл бұрын
What? I’m confused
@shaukeki 5 жыл бұрын
@@oxintheshop since he is already doing LEDs, this was a perfect opportunity to put red ones in the eyeballs of the dog.
@pattyofurniture100 5 жыл бұрын
Pretty sure the epoxy would melt them
@shaukeki 5 жыл бұрын
@@pattyofurniture100 nah. Do the retroactively. Similar to doing LED strips
@pattyofurniture100 5 жыл бұрын
@@shaukeki that would be physically impossible without the lights being mounted on top of the surface which would interfere with game play and make the boards unusable
@spl150db 5 жыл бұрын
i did a super nice top board with tape and stain, then somehow screwed up on the poly part, i dont know what i did wrong. has swirl marks from sanding it between coats. and legs jacked up, trying to fix that as well
@oxintheshop 4 жыл бұрын
sorry to hear that I hope you got it figured out sorry just now seeing this comment
Willow’s World of DIY
Рет қаралды 36 М.