No video
DIY Vacuum Forming Machine
Рет қаралды 78,130
Күн бұрынVacuum Forming is a process used to mold plastic into a desired shape. In this video we will show how to make a simple vacuum forming machine. If you watch until the end of this video you will make and modify you own machine. We you enjoy this video. Don’t forget to subscribe my channel and don't forget to click on the bell icon to get Notification.#vacuum#Forming#Mold
@user-pk4ig2do6v 2 ай бұрын
Thanks. Iam. From Indonesia
@kenbtheman Жыл бұрын
I used a wooden cigar box to build mine. Worked great.
@jeffreymoffitt4070 7 ай бұрын
Well I'll be doing this in about 5 mins lmao wish me luck!
@rivlry1975 3 жыл бұрын
Amazing. Well done. That will be on my wish list of things to build
@MrProjectTSE 3 жыл бұрын
Thank you.
@spreadItWide 11 ай бұрын
It'd be cool to have a heating element 12" directly over the vacuum that heats the plastic from above. The vacuum could be supported by 4 ⅛" steel rods, 1 at each corner, that doubles as a slider track that is always perfectly centered from start to finish. I'm sure there's a few more steps involved, just throwing ideas out there for someone..
@createinspain 4 жыл бұрын
For the plastic you can also use 250 micron binding covers I'd think. I was experimenting with them to see if they are heat resistant and they are not, they can be moulded with heat....:) and they can be pretty cheap if you can't get OHP
@imajinari.design 2 жыл бұрын
i just tried using OHP.. and it can't be used. So rigid.
@tylerjones7310 Жыл бұрын
The vacuum Form Machine is so Cool in rc and diecast car bodies in small forms in my opinion in two scales I like 1/64 and 1/24 scales
@TheBrayan25 3 жыл бұрын
Gracias por tu aporte, me ayudas mucho a comprender está técnica industrial
@kraustman2285 4 жыл бұрын
Good video thanks. I think you should put your vacuum tip center. It will be increase quality I guess
@MrProjectTSE 4 жыл бұрын
Thank you friend.
@eastclintwood7295 2 жыл бұрын
After watching this, I'm ready to build my own space ship, but first need to D-load that sound trac
@bbershadskyiprojects 2 жыл бұрын
Where to get this pvc? thanks for this video, it's amazing!
@MrProjectTSE 2 жыл бұрын
I would like to suggest you to search by this word "Thermoplastic for vacuum forming" and you will find it for sure.
@bbershadskyiprojects 2 жыл бұрын
@@MrProjectTSE Thank you!
@petaiasamasoni5846 8 ай бұрын
This is amazing
@frankborsboom5218 4 жыл бұрын
Awesome. Nice and simple :)
@RestorationAustralia 4 жыл бұрын
Great idea.
@avantasiaabo 3 ай бұрын
Genial
@nokiot9 4 жыл бұрын
Do normal upright household vacuums have Enough power to pull like this? I built one and am having issues getting the plastic to meet the edge of the form and the hole base. For some reason I have better results with thicker plastic. Does my vac just suck?
@nokiot9 4 жыл бұрын
Is the hole pattern on the base important? I just drilled a ton of holes randomly
@MrProjectTSE 4 жыл бұрын
1.Power of vacuums must match the form's size. 2.Vacuum at a Form must not leak. 3.The hole pattern on the base important and must uniform.
@federicos9821 4 жыл бұрын
Hi cool video, what kind of plastic did you use? Also it would have been very nice if you showed the plastic mold without the Dc motor in. Thanks
@MrProjectTSE 4 жыл бұрын
If small objects you can use Overhead Projector Sheet,Poleyestor or PVC.
@kelechi.danobioma 6 ай бұрын
Make the holes very tiny, to avoid leaving marks on the pvc
@AFAMINE 2 жыл бұрын
nice work , i have some issues and i need your help , when the pvc sheet is heated it turn from transparent to white , why ?
@mariashaver1483 3 жыл бұрын
What is the material that you used to make the frame that held the plastic? The brown piece?
@clintlucas7604 Жыл бұрын
Question: I have seen other videos and would like to know if several holes or one hole in center is the best for the vacuum?
@MrProjectTSE Жыл бұрын
There are many factors such as the size or shape of object and the size of vacuum pump.
@clintlucas7604 Жыл бұрын
@@MrProjectTSE I have a whole egg puck approximately 12"x6" on a 14"x14" table.
@gensischosen251 3 жыл бұрын
I have a question can any plastic relate material Will do ? Like Book plastic covers and Plastic bag Will worked for my homemade vaccum forming?
@MrProjectTSE 3 жыл бұрын
www.bridgewooduk.com/blog/production/vacuum-forming-materials-thermoplastics
@yangxin8356 3 жыл бұрын
It is great to make one, but it is too difficult for me and the mold is not accurate enough. I will buy one from Amazon
@jeffreymoffitt4070 7 ай бұрын
The mold is as accurate as your buck.
@geoquin4 2 жыл бұрын
Great video. What size were the holes you drilled?
@MrProjectTSE 2 жыл бұрын
depend on your frame but in this clip, I use 4mm.
@sanb3586 Жыл бұрын
You have a nail gun but hole saw ?
@DLStarbuck 3 жыл бұрын
Does clear PETG turn white when over heated?
@MrProjectTSE 3 жыл бұрын
I think that PETG can not use.
@richardlamer3910 7 ай бұрын
Of course you can use PETG plastic as it’s the most commonly used in vac forming.
@phisitja01 4 жыл бұрын
Thank
@MrProjectTSE 4 жыл бұрын
ติดตามไปเรื่อยๆนะครับ ถ้าดีก็ช่วยเผยแพร่นะครับ อยากให้เด็กไทยเป็นนักประดิษฐ์มากๆครับ
@phisitja01 4 жыл бұрын
@@MrProjectTSE ขอบคุณครับ เยี่ยมมากครับ
@dronus Жыл бұрын
Where do you get those sheets?
@MrProjectTSE Жыл бұрын
It is the plastic that expands when increasing temperature.
@dronus Жыл бұрын
@@MrProjectTSE no shit, Sherlock holmes.
@billygate4063 Жыл бұрын
@@MrProjectTSEnot subscribing cause ur NOT helping
@TonyFisherPuzzles Жыл бұрын
@@billygate4063 Oh no, has Google broken again?
@yangyedda8092 2 жыл бұрын
It's cool but too small. I bought a larger desktop version from Amazon