DIY WALL MOUNTED PRESSURE WASHER & VACUUM SETUP. CUSTOM DETAIL GARAGE BUILD

Рет қаралды 253,114

Күн бұрын

DIY INSTALL OF A WALL MOUNTED PRESSURE WASHER & VACUUM SETUP. FULLY CUSTOM DETAIL GARAGE BUILD. Join me as we install a full DIY detail garage workstation. I show the entire process so that you can do it yourself. This detailing pressure washer setup will take your garage to the next level. We will be installing a Karcher K1700 Cube pressure washer, Coxreels hose reel, Obsessed Garage Mosmatic Spray Gun, Rigid portable vac shop vac, Coxreels vacuum reel and all the accessories needed to complete this detailers rig. Leave a comment with any questions you may have as well as any thing you learned from your detailing setup installation. I post videos often so please subscribe and like the video to support the channel. Its free and helps a lot.
Check out my website for a full parts list, explanation and links. www.hawaiidetailing.com/press...
Links for the pressure washer setup A La Carte:
Sharkbite Hose bib amzn.to/2KVXQT7
SS braided water inlet hose amzn.to/3qi6Su9
SS MTM Garden Hose 3/4” Female Quick Disconnect Coupler bit.ly/3locVKO
SS MTM Garden Hose 3/4” Male Quick Disconnect Coupler bit.ly/2SUXSPy
SS Shelf 12X24 (Rounded Edge) amzn.to/3ofPNPx
SS Shelf 12X24 (Square Edge) amzn.to/2VtFaMB
Karcher K1700 Cube Electric Power Pressure Washer amzn.to/3eK2OkU
M22 (14mm) Female to 3/8" SS Plug bit.ly/2UmpQRf
90 degree SS fitting (optional to make a lower profile fit) amzn.to/3dWEbPw (Depending on the distance from your shelf to the hose reel use a 2' or 3' jumper hose accordingly)
3' Jumper Hose 3/8” bit.ly/38wP8ok (S routing under shelf)
2' Jumper Hose 3/8 amzn.to/3r3UGgd (C routing exposed)
SS Cox Hose Reel Mount (Used to mount the Cox Reel to 16” spaced studs) bit.ly/3eLMMTD
Cox Hand Crank Hose Reel (With SS Swivel) bit.ly/3pjrhy7
Cox Hand Crank Hose Reel (Brass swivel) amzn.to/3ob4TFJ
MTM Hydro Kobrajet 100-Foot (3/8") 4000 PSI Non-Marking Hose bit.ly/3nhwjJF
MTM Hydro Kobrajet (GRAY) 75-Foot (3/8) 4000 PSI Non Marking Hose amzn.to/2LuzSiq
3/8” Female SS Quick Disconnect Coupler bit.ly/35h4NWO
SPRAYER GUN:
Sprayer and Wand upgrade kits (choose quality level): bit.ly/3q8xUGF
Gun only:
Ultimate bit.ly/3LiVZ63
Advanced bit.ly/3eNbas6
Basic bit.ly/345qXxc
TIP:
SS Nozzle Assembly (40 Degree - 3.0 Orifice to achieve 1000 PSI with the karcher K1700) bit.ly/35sLcT8
Vacuum Setup by Coxreels
Check out my website for a full parts list with links. www.hawaiidetailing.com/vacuum
50’ vacuum reel full kit amzn.to/3nWIDox
50' Vacuum Reel bit.ly/3wRhPFI
35' Vaccum reel amzn.to/3myXShS
50' Vaccum reel amzn.to/3qyFHdV
Vac Ridgid Portable Vac amzn.to/2JtVmeu
Ridgid Filter Replacement amzn.to/36wPMR4
90 Degree vacuum hose fitting to connect to Reel amzn.to/2JvfsVx
MY FAVORITE AMAZON PRODUCTS www.amazon.com/shop/hawaiites...
Check out my website for detailed description of everything www.hawaiidetailing.com/
SUBSCRIBE / @hawaiidetailing
KZfaq / @hawaiidetailing
FACEBOOK / hawaii-tesla-and-detai...
INSTAGRAM / hawaiidetailinghq
TIKTOK / hawaiidetailing
PLAYLISTS
PRESSURE WASHER • Pressure Washer
GARAGE • Garage & Equipment
FOAM BATTLES • Car Soaps Shampoo Foam...
WHEELS • Detailing Wheels and T...
EXTRACTOR • Carpet Extractor
DETAILING • Detailing
TUTORIALS • Detailing Tutorials
GRILL • Grill Videos
00:00 Intro
1:10 Skip to the build
5:36 Skip to the install
9:02 Finished product
As an Amazon Associate I earn from qualifying purchases. Thanks for your support.
#pressurewasher #powerwasher #detailing

Пікірлер: 439

@HawaiiDetailing 3 жыл бұрын

Here is a comprehensive guide to building your own wall mounted pressure washer kit with every part and piece to the whole setup with a detailed diagram. www.hawaiidetailing.com/wallmountedpressurewasher Check out my other pressure washer video. kzfaq.info/get/bejne/i6yVnpRl36rWhqs.html

@cuts2thebone Жыл бұрын

What wrench did you use to connect the kobra jet hose to the cox reel?

@marcelahurtado4100 11 ай бұрын

Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use kzfaq.infoUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.

@HawaiiDetailing 11 ай бұрын

Thanks. It’s a good one.

@31acruz 2 ай бұрын

I think taking the time to paint items that clash with the colors in a garage is time well spent. Makes everything peaceful and blend well together.

@HawaiiDetailing 2 ай бұрын

i agree thanks

@Rad1oD3mon 3 жыл бұрын

I love this setup and want to do it in my garage. I can see the benefit of the racking system so I like it afterwards. Plus it blends the plywood panel in better so you REALLY don't even know it's there

@HawaiiDetailing 3 жыл бұрын

Yea I agree. Thanks for watching

@jaa02130 3 жыл бұрын

Love the setup and the racking system owner installed. Great work and video saved for a future garage project.

@HawaiiDetailing 3 жыл бұрын

Glad it helped! Thanks for watching

@bobfredericks6545 3 жыл бұрын

Great job. Gives me some ideas for my setup. I like the finished product with the racking system.

@HawaiiDetailing 3 жыл бұрын

Thanks. I think it turned out nice. He is very happy and uses it all the time.

@Bullybeef972 11 ай бұрын

Wow, love it! All it needs now is the deionized water system. Thanks!

@HawaiiDetailing 11 ай бұрын

Thanks. Glad you enjoyed the video

@rlstrad2059 3 жыл бұрын

Sweet, and the racking system is right too, need it for the cleaning supplies to maintain that sanitary look.

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. I appreciate it. Thanks for watching

@terrylarry1932 3 жыл бұрын

Great Job!! Racking system works great if you can use shelves to place detail cleaners etc on them

@HawaiiDetailing 3 жыл бұрын

Thanks for commenting. Yeah that his plan.

@nexamax 3 жыл бұрын

Excellent step-by-step set-up...and it looks fantastic...!!! I Love the drywall mud and repainting the Karcher and Rigid faces to match... EXCELLENT attention to detail. The pre-planning with board layout is also a fabulous way to make things work. Very well thought out, now I need to stop typing and start doing...! ;-)

@HawaiiDetailing 3 жыл бұрын

Yeah for sure. You can do it. If you have any questions let me know. Thanks for watching

@DascoTrades 2 жыл бұрын

@@HawaiiDetailing What paint did you use on the Karcher and Rigid?

@mikesilveira8114 Жыл бұрын

@@HawaiiDetailing yeah what plastic paint and also how did you deal with the bolts from the reels against the sheetrock wall?

@ChrisCaballero 3 жыл бұрын

Looks amazing! Simple yet effective 👌

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. Thanks for watching

@adiyq6617 3 жыл бұрын

Very nice setup and video! Thank you for sharing!

@HawaiiDetailing 3 жыл бұрын

Thanks

@Brian.RollTide 2 жыл бұрын

Definitely after. Looks for customized and clean.

@HawaiiDetailing 2 жыл бұрын

Thanks for sharing.

@ryanclark5052 Жыл бұрын

After racket system, awesome setup

@gregwayne6785 3 жыл бұрын

Well done! Some great ideas. I like it with the racking system. Would actually put panels on top for a more finished look.

@HawaiiDetailing 3 жыл бұрын

Glad you like it. Yeah good idea. Thanks for commenting.

@usi9fl 3 жыл бұрын

Nice job, very neat. I do like the racking system.

@HawaiiDetailing 3 жыл бұрын

Thanks alot. Glad you liked it.

@quijada1545 3 жыл бұрын

Your set up rocks bro. No wonder others want to duplicate it. The racking system is ok but I don't love it. I can see things getting in the way in such a tight corner. Thanks for the content. Keep it coming!! 👍

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. I appreciate it. Thanks for watching

@pooneyheat 3 жыл бұрын

That looks awesome! Great job man!

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. Appreciate the support.

@kanaletumlinson Жыл бұрын

Awesome setup! Thanks for sharing I like the racking system so I can hang all my cleaning goodies auurriittteee 🤙🏽

@HawaiiDetailing Жыл бұрын

Yeah. Was a fun project. Thanks

@ggabtheBlessedOne 2 жыл бұрын

Nice! Bless up!

@imdustyjames 3 жыл бұрын

the racking system was a nice extra touch at the end

@HawaiiDetailing 3 жыл бұрын

Thanks for commenting.

@jackww839 2 жыл бұрын

You are the man! Love everything!

@HawaiiDetailing 2 жыл бұрын

Thanks a lot.

@twoalphasix4332 3 жыл бұрын

Dude this is awesome. I have the same Karcher Unit and I've been wanting to do this for a while

@HawaiiDetailing 3 жыл бұрын

Makes using your machines so much better. User experience is drastically improved. Go for it and start building it. If you have any questions feel free to ask. Thanks for watching

@channingrhodes6756 2 ай бұрын

Great job on the install! I like the racking system. It gives it a more professional look and gives the owner options later if he wants to add something.

@HawaiiDetailing 2 ай бұрын

Thanks. The owner really enjoys that kit. Been going strong ever since.

@palco22 3 жыл бұрын

Awesome.....it's ready to go !

@HawaiiDetailing 3 жыл бұрын

Thanks for watching. Yeah it all ready anytime you need it.

@sgoldbe8 3 жыл бұрын

Beautiful system!

@HawaiiDetailing 3 жыл бұрын

Thanks. Appreciate you watching.

@peekaaboo_8082 Жыл бұрын

Aloha Braddah!! Love your channel ❤ and Thank you for all your Aloha!

@HawaiiDetailing Жыл бұрын

Aloha. Thanks I appreciate it

@user-id2kj5nb8g 10 ай бұрын

looks good after installing the rack system.. great work

@HawaiiDetailing 10 ай бұрын

Thanks 👍

@yougenpillay5428 3 жыл бұрын

Thank You For This Video. I'm gonna do a identical setup in my garage

@HawaiiDetailing 3 жыл бұрын

You will like it. It’s a great little setup. Makes washing the car fun. Thanks for watching

@Zeron18 3 жыл бұрын

I used the swivel side of the hose for barrel of the reel. It makes life so much easier. There's no need for a swivel end to the gun since I can always install a swivel joint. Then again, I opted for the sgs28 and never looked back.

@HawaiiDetailing 3 жыл бұрын

Good idea. Thanks

@jtr-fw5th 3 жыл бұрын

Really clean install!!

@HawaiiDetailing 3 жыл бұрын

Thanks alot.

@harsimran1 3 жыл бұрын

That rack is a great and beautiful addition.

@HawaiiDetailing 3 жыл бұрын

Thanks. Thanks for watching too.

@YTkush 3 жыл бұрын

Obsessed Garage got you too....me too bud, exact setup at home.

@HawaiiDetailing 3 жыл бұрын

Hahaha. Great little set up. Thanks for watching

@jesusbaez4427 3 жыл бұрын

Awesome setup i so need this done in my garage

@HawaiiDetailing 3 жыл бұрын

Yeah it really changes the experience of working in the garage. Makes it fun for sure. Thanks for watching and commenting. If you have any questions just let me know.

@No_life_haha 2 жыл бұрын

Clean setup!!!

@HawaiiDetailing 2 жыл бұрын

Thanks. Was a fun install. Still going strong and they love the rig.

@RaldasDetails 3 жыл бұрын

Awesome job bro!! 😎👍🏼

@HawaiiDetailing 3 жыл бұрын

Thanks buddy.

@maynorgonzalez6766 3 жыл бұрын

Nice 👍🏻 looks amazing 🤩

@HawaiiDetailing 3 жыл бұрын

Thanks for watching

@Yusufmasron 2 жыл бұрын

I love it, so neat, and practicle

@HawaiiDetailing 2 жыл бұрын

Thanks. It’s a great kit.

@joeyherbello2367 3 жыл бұрын

Great job!

@HawaiiDetailing 3 жыл бұрын

Thanks. Thanks for watching

@sw3int867 3 жыл бұрын

Great job man!

@HawaiiDetailing 3 жыл бұрын

Thank you! Thanks for watching

@avirexdeep3627 3 жыл бұрын

Keep making videos your very informative.

@HawaiiDetailing 3 жыл бұрын

Thanks. I appreciate it.

@brianmilner9837 3 жыл бұрын

like the music you put in the video, nicely finished/polished

@HawaiiDetailing 3 жыл бұрын

Thanks for watching. I appreciate it.

@lomaxmutumba5043 11 ай бұрын

I love it. ❤❤❤

@joekegg 3 жыл бұрын

Nice clean install. With Slatwall looks better and obviously has more utility. Getting mine together.

@HawaiiDetailing 3 жыл бұрын

Thanks. Keep me posted. I would like to see the results. If you have any questions feel free to ask.

@jerryedwards2359 3 жыл бұрын

Great job all the way around

@HawaiiDetailing 3 жыл бұрын

Thank you. I appreciate it thanks for watching.

@nestorchoto4930 3 жыл бұрын

Que bonito trabajo. Muy profesional. Gracias trataré de hacer lo mismo.

@HawaiiDetailing 3 жыл бұрын

Thanks for watching

@randyhill5750 2 жыл бұрын

Looks great

@HawaiiDetailing 2 жыл бұрын

Thanks

@michaelkoval6508 3 жыл бұрын

Looks great.

@HawaiiDetailing 3 жыл бұрын

Thanks for watching

@joevanseeters2873 3 жыл бұрын

Brilliant! Love this set up. Great use of "out of the box" thinking for that plywood option to make it work similar to your own set up. Wish you lived close to me man, i'd have you do an install for me too! I think the rack system is pretty cool too. Gives options on maybe hanging or organizing some detailing products, although me personally, I would rather have all my products out of sight inside the cabinet for a cleaner look. I saw on Pan the Organizer's channel that he had this trick cabinet set up where, when you opened the bottom cabinet, the detailing cart (from the same cabinet company) just rolled out of the cabinet and had all your frequently used detailing products on the cart you could roll around and then when done, push it right back inside the cabinet and close the door! Everything back neat and clean. Love that idea. Really enjoying your videos and ideas. I already got a few new ideas from watching your videos. Just subscribed to your channel also.

@HawaiiDetailing 3 жыл бұрын

Glad you are enjoying the content. Thanks for watching. I like put away and neat also. I keep a few select products on my shelves but everything else is put away.

@thesportsperspective1818 Жыл бұрын

Nice!

@HawaiiDetailing Жыл бұрын

Thanks!

@alexkellum1 3 жыл бұрын

Sick setup!

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. Thanks for watching

@basharsalim2201 3 жыл бұрын

Wow love the set up I wish there are some ppl can do the set up here in ca

@HawaiiDetailing 3 жыл бұрын

Thanks a lot and thanks for watching.

@joshcosta423 3 жыл бұрын

It's easy enough for you to do yourself.

@konradfritz27 2 жыл бұрын

So cool

@Golf315 2 жыл бұрын

Amazing

@HawaiiDetailing 2 жыл бұрын

Thanks

@SpotlessWaterGuy 3 жыл бұрын

Love it love it love it

@HawaiiDetailing 3 жыл бұрын

Thanks a lot.

@antoniohardy5981 3 жыл бұрын

Great job

@HawaiiDetailing 3 жыл бұрын

Thanks a lot and thanks for watching.

@sreethampan 3 жыл бұрын

Excellent job

@HawaiiDetailing 3 жыл бұрын

Thanks for watching

@keishawn 3 жыл бұрын

No idea how I got here, or why I would need this setup. But I'll be doing this over the summer, quality content my guy!

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. I appreciate it. Thanks for watching

@fernandopenah 3 жыл бұрын

Great project. On attaching the equipment to the plywood, T-Nuts may have worked better as they end up flushed instead of a washer and nut protruding out the back requiring a little extra work to make clearance for them.

@HawaiiDetailing 3 жыл бұрын

Yea I agree thanks for watching and the suggestion. Next time I will definitely look at some low clearance bolts for sure.

@iglopez63D 2 жыл бұрын

T-nuts? I'm going to try to do the same set up

@fernandopenah 2 жыл бұрын

@@iglopez63D yeah they have these prongs that dig into the wood and end up flush. Once you see them, it will make sense. Amazon has some sizes.

@apostolisapostolos2254 2 жыл бұрын

Great work

@HawaiiDetailing 2 жыл бұрын

Thanks for watching

@hybridpinoy8569 3 жыл бұрын

Nice job!! I'm jealous 🤪🤪

@HawaiiDetailing 3 жыл бұрын

Thanks man.

@sandro2304 3 жыл бұрын

This looks awesome!

@HawaiiDetailing 3 жыл бұрын

Yeah it a cool setup for sure. Thanks for watching

@sandro2304 2 жыл бұрын

@@HawaiiDetailing Hi Jeremy, I am doing a similar setup. Where did you get the elbow? Do you have a link?

@HawaiiDetailing 2 жыл бұрын

@@sandro2304 yes the links are in the description. Thanks for watching and supporting the channel.

@J1Z06 3 жыл бұрын

That is one sweet set up! love this channel!

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. I appreciate it

@J1Z06 3 жыл бұрын

@@HawaiiDetailing Keep up the great work. Enjoy the weekend.

@HawaiiDetailing 3 жыл бұрын

@@J1Z06 thanks. You too.

@justinmurphy2227 3 жыл бұрын

@jay dobbins you're so right! I'm doing a very similar setup at my home. I was on the fence about what pressure washer to buy.....nope....not anymore!

@ronbeeman357 2 жыл бұрын

Nice setup

@HawaiiDetailing 2 жыл бұрын

Thanks

@HALNSS 2 жыл бұрын

Clean 🔥🔥

@HawaiiDetailing 2 жыл бұрын

Thanks

@Britman78 3 жыл бұрын

Great video and excellent end result. Looking forward to you posting the information on where to purchase some of the products you used.

@HawaiiDetailing 3 жыл бұрын

Thanks a lot.

@HawaiiDetailing 3 жыл бұрын

Here are the links in the description. Sorry for the delay.

@MrAmonts 2 жыл бұрын

Dude, awesome set up, thanks for sharing step by step. Ever consider installing a sink in the garage? Would be amazing to see it.

@HawaiiDetailing 2 жыл бұрын

I have. When I redo my cabinets I may put one in. Thanks for watching the channel

@maggierivera5510 3 жыл бұрын

Awsome

@HawaiiDetailing 3 жыл бұрын

Thanks. Works great. Thanks for watching

@MrNmd9009 Жыл бұрын

That's bad ass! Inspiration tomorrow I'm going to home depot!

@HawaiiDetailing Жыл бұрын

Yeah. Do it.

@MrNmd9009 Жыл бұрын

@@HawaiiDetailing already done my guy. Came out fantastic

@HawaiiDetailing Жыл бұрын

@@MrNmd9009 great to hear.

@habibtil5544 3 жыл бұрын

Super awesome

@HawaiiDetailing 3 жыл бұрын

Thanks for watching.

@tom69821 3 жыл бұрын

That looks great! The only thing that would annoy me if it was my garage would be the vaccuum cleaner on top of the storage cupboard. I’d probably try to get it inside and just run a wire to the plug instead.

@HawaiiDetailing 3 жыл бұрын

Yeah that was where he wanted it. He really likes it as it’s out of the way and easy to access to clean. Thanks for watching

@fattahebrimatamba4922 3 жыл бұрын

Good job bro

@HawaiiDetailing 3 жыл бұрын

Thanks a lot. Thanks for watching.

@lanceballew2304 2 жыл бұрын

Very nice👍🏻

@HawaiiDetailing 2 жыл бұрын

Thanks

@stilleysmobiledetailing1696 2 жыл бұрын

i agree with joe van Seeters, man neat and clean is the way to go, however i do like jeremys stainless shelves in his garage with his go to products right there grabable, im a fan of these rack systems but i think these are misplaced, however my opinion may change if i was able to see whats going on in the rest of the garage area. this guys rack placement may just be his best option , i dunno.. hey, still looks sweet though, way better than my current garage setup.

@colinwithey1906 3 жыл бұрын

This is awesome really love it come by mine sometime and do one for me so impressed

@HawaiiDetailing 3 жыл бұрын

Hahaha. Thanks and Thanks for watching

@1badhaircut 3 жыл бұрын

Funny how you and Obsessed are so different doing the same business. Got to admit tho he’s a funny-guy 🤣 ! ( funny how do I amuse you )

@HawaiiDetailing 3 жыл бұрын

Thanks for watching. Yeah I know what you mean.

@kamsagoo5441 3 жыл бұрын

Like your style...

@HawaiiDetailing 3 жыл бұрын

Thanks a lot.

@donschultz7759 2 жыл бұрын

Dang I wish I lived near you. Definately could have you do my setup for my pressure washer

@HawaiiDetailing 2 жыл бұрын

Yeah man. Just do it your self. Easy. Thanks for watching

@donschultz7759 2 жыл бұрын

@@HawaiiDetailing thanks sir. Yeah I'm having issues with my McKillians stubby spray gun leaking right now. But eventually someday I will make that awesome setup.

@joshcosta423 3 жыл бұрын

Another tip would be to use wood, captive nuts from the backside so you don't have the bolts/nuts hanging off the back. Only reason I'd suggest that is to prefab like you did but on a wall without the open drywall.

@HawaiiDetailing 3 жыл бұрын

Yes I agree. The project started with no open drywall and when the build was almost complete my friend decided to run plumbing and electrical. If you saw my system. I blocked in prior to drywall and was more of a custom finish. Thanks for watching and commenting.

@banga8080 3 жыл бұрын

👍🏽👍🏽👍🏽 before the rack

@HawaiiDetailing 3 жыл бұрын

Thanks for watching. I appreciate it

@darinking1343 3 жыл бұрын

I love the setup, but the Vac on top of the cabinet, gets to be a problem when you need to dump it, especially for those who might be a little shorter, etc. Generally I think it's better to keep the dirty stuff closer to ground level.

@HawaiiDetailing 3 жыл бұрын

That’s an option also. This was a friends system I installed and he wanted it on top of the cabinet. Thanks for watching

@annagraham6204 2 жыл бұрын

Good point. I’d still take this set up. Pretty bad ass.

@skyserf 7 ай бұрын

@@HawaiiDetailingDo you know what kind of cabinet that is?

@kervinarnold5664 2 жыл бұрын

Nice work I want one

@HawaiiDetailing 2 жыл бұрын

Yeah. Good kit for sure.

@stevehyde2956 3 жыл бұрын

Thanks for showing this and especially for the detailed list of items used. It has been very helpful in getting my own project going. Does the pressure washer get attached to the shelf in any manner?

@HawaiiDetailing 3 жыл бұрын

You are welcome. Mine sits there without moving at all. The install on the video you watched we put a rubber non slip mat under cut to size and it works great. You could mount it to the shelf although I have not found it to be necessary. Thanks for watching

@avirexdeep3627 3 жыл бұрын

When your pressure washer dies. You should look at the Ar630 tss (total stop) italian pressure washer.

@HawaiiDetailing 3 жыл бұрын

The AR is a good one. Thanks for watching.

@usi9fl 3 жыл бұрын

Nice clean job. I like the shelfing board wall addition.

@HawaiiDetailing 3 жыл бұрын

Thanks for commenting & watching.

@Andres0603 3 жыл бұрын

Great setup looking forward for this project. do you know what kind and size of bolts used on studs and what kind of plywood did you use

@HawaiiDetailing 3 жыл бұрын

3/4 plywood and use good heavy garage T bolts with fender washers. Thanks for watching

@fernandopenah 3 жыл бұрын

Awesome. Definitely planning on doing this. Thanks for sharing. One question, what height did the shelf end up at?

@HawaiiDetailing 3 жыл бұрын

I put the reel at a comfortable height for the user and put the shelf above it. I think that’s most important. Thanks for watching

@michaelsa892 3 жыл бұрын

I like the racking system that’s an awesome set up what does something like that run price wise

@HawaiiDetailing 3 жыл бұрын

Probably about 1200 or so. I would have to add it up to know for sure. Thanks for watching

@sikos_2301 3 жыл бұрын

All right.. 😁

@HawaiiDetailing 3 жыл бұрын

Yeah man. Thanks for watching.

@sikos_2301 3 жыл бұрын

@@HawaiiDetailing My pleasure 👍Love your channel.

@hunkydory419 2 жыл бұрын

That's a nice and clean setup man! My only question is did you have to shave off the tips of the bolts that were protruding out of the back of the board when mounting it flush to the wall?

@HawaiiDetailing 2 жыл бұрын

You can use carriage bolts or counter sink the bolts to avoid any issues. We notched the drywall so that they would sit flush as he was never going to take this rig down and if he does it would be a quick drywall repair. Thanks for watching

@user-si7sf8ql6m 4 ай бұрын

Great video. I just got my Cox reel in the mail for my pressure washer hose. What size were the bolts you used to mount it? 1/4” diameter?

@batwitdaba2057 Жыл бұрын

Great info. Planning goes a long way in an efficient install. I've seen a video in which two guys fudged up a custom Kranzle wall install, taking several days to complete! At least the video was a good laugh. BTW, why do you prefer to use fender washers? The coxreel manual doesn't specify the type of washer. I just used ones that were slightly larger than the hex head of the bolt. Thanks.

@HawaiiDetailing Жыл бұрын

It’s overkill. As long as it does not pull through you are good. Thanks for watching the channel

@patram4880 3 жыл бұрын

Where did you get those nice shelves to hold all your bottles that’s nice real nice please advise thank you

@HawaiiDetailing 3 жыл бұрын

Here are some links to my garage items. Thanks for watching and supporting the channel. www.amazon.com/shop/hawaiitesladetailing?listId=3QNHS3YBPEVIR&ref=idea_share_inf

@dannysonier8282 3 жыл бұрын

Awesome job, what type of hose and gun used for the pressure washer?

@HawaiiDetailing 3 жыл бұрын

Thanks for watching. I put links in the description for each item so that you can have a look.

@RFlynn618 Жыл бұрын

Nice job. What about the nuts and bolts on the backside of the plywood?…How were you able to land that on the wall with the bolts sticking thru??

@regelizanetti3778 3 жыл бұрын

Top muito bom Deus abençoe

@davidreynoso9710 2 жыл бұрын

Nice set up!. How heavy does the pressure washer hose get while being used ?

@HawaiiDetailing 2 жыл бұрын

Not heavy at all. Thanks for watching

@user-zr3tb6bg7o 3 жыл бұрын

Awesome job... can you come to Poland and do mine? 😅😅😅

@HawaiiDetailing 3 жыл бұрын

Thanks. I wish. Hopefully these videos help if you want to do it yourself.

@ghc7910 3 жыл бұрын

Any vid on how to spray paint the pressure washer cover plus I have the karcher 1700 with wheels do you prep area or just spray paint ?

@HawaiiDetailing 3 жыл бұрын

Shows me painting it here. kzfaq.info/get/bejne/i6yVnpRl36rWhqs.html Thanks for watching.

@AntLive29 Жыл бұрын

i like it . do you have a general idea of the cost to have plumber and electrician come out?

@HawaiiDetailing Жыл бұрын

It will vary dramatically based on your site location and also how far away electric and water sources are from the location you want to install.