The proper tool at Lowe's cost a fraction of the material you used

I'd have re-shot the cutting section for the video, your contraptions are always cool, but it makes the machine look really bad when it crushed the pipe

I would of cut the tube with the grinder instead of building that contraption.

"DIY tacking of the square pipe and using $20 in material and a few hours time to make a bulky pipe cutter that Lowes sells for $8.95" Fixed your title

Dude you better start welding beads instead of tacking, one of these days those "tools" may fail and cause an accident.

Hot glue a tooth brush to a bic lighter and then zip tie it to a broom handle. Save lots of time brushing teeth, sweeping and smoking cigs!!!! LIFE HACK!!!

Какой чудесный срез получился. Тащите Полнаяхуйняметр.

만구 쓸데없는걸 이렇게 진지하게 만드네 ㅋㅋ

В любой не понятной ситуации, всегда приваривай подшипник👌🤣🤣

249 полуляхов

You know they make these things called pipe cutters right?

Thank you for showing the whole process and what it does! I'm sick AF of 85% videos

I can't be the only one still waiting for the welding to happen.

theres a tool for this tho

Gotta work on those bird poop welds. No penetration

They constantly go through the time and trouble of making tools that already exist on this channel.

10/10 filming 2/10 welding. I could break any of those welds with a wet noodle

I love how 99% of comments are “why don’t you just buy one” or some variant of that. Nobody has ever just made something because they wanted to? Maybe bored, or artistic. Funny though cause he’s making a lot more from these vids that what it cost in materials!

Hahahhahah the end result, a mangled pipe end. Nice tool man. Keep going one day you will notice that hardware stores allready sell the tools you are making, and have been for a while

Cheaper to buy your own which is where you probably got the cutting wheel in the first place

$7 and you could have that tool, and it would fit in your pocket instead of being 3ft long and 20lbs

новая мера измерения DIY - половина Полуляха!))

Metal used~ $40 Threaded rod~ $5-10 High quality 6k series bearings x 4~ $35 Welding equipment~ you get the picture Time and welding skill/knowledge~ $? Wonder if he knows you can get a pipe cutter at home depot for a fraction of the cost. I will admit the one from home depot will prob be a pos and not heavy duty like the one he built. So I'm torn between criticism and ya... a decent looking tool.

If home Depot doesn't have it, then I go to Ace or Lowes.

First of all: there are cheaper pipe cutters Second of all: what cutting techniques did you use?

I like watching random projects and tools for the fun of it, but I'd drop buzzwords DIY and the like. just call it what it is

Oh my God you made it pipe cutter

Wow I bought a pipe cutter for like $20 or less and it’s about 3 inches big.

If you're looking for useless "life hack" videos, fine. If you're looking for welding videos, this isn't it... Using an angle grinder and cutting disc to make a tool that does a worse job?? Wtf

Run a damn bead enough with the tacking

I think this is a pipe cutter. It costs like 5 dollars and you can save the time welding.

I sometimes wonder how this guy welds

Вдохновляет!

Like im losing sleep over this please

Let’s face it, most steel fabricators ain’t rocket scientists.

Yep or you could buy a pipe cutter for 1/4 the price.

A estos humanos de hoy en día les encanta complicarse la puta vida✨✨

Am I the only one that saw the pipe at the end all dented from too much force? Lmao

Really!? I watched this only to get a pipe cutter!? Waste of my time.

Totally handy sharts. Yup

That tool allready exist and does a better job than the one you made

Good way of making something useful but to be honest that is not a safe tool

I’m all for being creative but this just seems like a waste of time

Здраваааааааасти...

Umm, that tool exists. It's a lot smaller than your contraption too.

Покрутил и таки непоказал готовый результат приблуды

Erm..... Pipe cutter?? What you're doing is called, "wasting money".

Waste of time if you just can cut it by the grinder

The Snap on exhaust cutter is far superior and probably cheaper to buy than the materials used and time invested in this crap!!

Где доктор?

Just buy a fudging pipe cutter!!

Kolay gelsin 🇹🇷🇦🇿

I like your creation because i am a blacksmith ...

Tell you don't know how to weld without telling me you don't know how to weld 🤣🤣

Lo venden hecho y de mejor calidad y sin comprar herramientas caras.

No really im 100% sure this guys makes this shit for our negative comments and gets paid for it A pipe cutter just use the damn grinder you used to cut the damn hole in the pipe

They already make tools for this that don’t mess the end up and is cheap. Go get a desk job….it’ll suit you better

Fake welds 🤷

Why did this dude use a screw to nock out a pice of metal

Сваривать когда научитесь?

Труборез для болгаркоидиотов

250 полуляхов

"Welding square tube" takes up five seconds of this video. Lol. Rocket genius haters in this comments section saying: "Use yer angle if'n yer gonna cut pipe" not even stopping to think of all the scenarios where a pipe cutter would be the better option or if your job did involve cutting pipe, you'd be smart to have a backup in case your angle grinder failed. I'll never have a need to cut pipe any more than could handle with a hacksaw, but l still appreciate the different steps of this build. If KZfaq gives an award for best welding channel, this one deserves it. For someone learning to weld, this channel has a ton of stuff that even if it didn't turn out too pretty anyone could make and use with a little bit of practice.

Это тот момент когда голова работает а руки из жопы

Hello bro where are you from

Клево смяло трубу

Top

Could do a better cut with oxy acetylene 😂😂

А это идея!

Or just buy a good pipe cutter lol.

Can you miniature motorcycle? Please 🙏 go video with miniature motorcycle!

Today on the shitty machining channel, build a 20$ tool for less than 100$

Absolutely incredible work. Thanks for sharing.

Epa, es herramienta ya está inventada.

i bet this guy dosnt know how to properly do a tri stitch weld

Just buy one

I could weld that better with bubble gum and duct tape.

Please just weld it

250 мегаляхов

Those tacs aren’t welds 🤡

Que pone para cortar? No se distingue bien

it didn’t even cut good

Learn to weld

That was a waste of key way

ABSOLUTELY horrible.

I literally just wasted a minute of my precious time. ¡¡WTF!!

Срез кривой от него

Это что за апорат такой???))))

Learn welding

Throw actual welds not that Chinese tiktoker weld tack shit, and ur homemade pipe cutter bent up the pipe

Ugly welding

If you already had a grinder.... Then why.....? Ya know what, nvm...

All that time wasted to make that piece of shit, when you could just go buy the right fucking tool at a hardware store.

the cut looks like garbage

Um was geht's?

🤦🤦🤦🤦

Telio

#funk fpv

????

teach urself welding please weldings look ugly