DIY: Wheel Spacers on Toyota FJ Cruiser

Рет қаралды 48,425

7 жыл бұрын

Today we install some wheel spacers on my brothers Toyota FJ Cruiser. He went with the Spidertax 1.25” Spacers on all 4 axles and it definitely made his car look a little meaner. In this video, ill show you what I did to prepare and install these spacers onto this FJ.
Spacers - www.spidertrax.com/Toyota-Hub-...
_______________________________________________
Shop - kantstandlamgarage.bigcartel.com
Instagram - / kantstandlamgarage
Instagram - / kantstandlam
Music - Mapps - Dont Hold On
Don’t forget to Like, Comment and Subscribe!
_______________________________________________

Пікірлер: 34

@daleschmidt7157 7 жыл бұрын

Super! Looks better if you ask me. I plan on doing this to my 4-Runner with stock wheels.

@omardelsognoblu 3 жыл бұрын

wow you made that look so easy.

@GHOST-hp2ji 7 жыл бұрын

Good job man, looks better....

@Nck_134 6 жыл бұрын

Big ass shop and no torque wrench haha

@eddierivera8763 6 жыл бұрын

Did you have any issues with this installation? I mean problems resulting from the use of spacers?

@theinkawarrior7649 3 жыл бұрын

Wouldn't that mod afect anything like shaft or bearing?

@LeonidasD828 6 жыл бұрын

is this west kendall Toyotas shop?

@ClancyDEntertainment 6 жыл бұрын

i have a 2008 fj cruiser with the bushwacker fender flares and i just installed 2 inch spacers. When i turn to the right, however, my driver side front wheel rubs up against part of my frame underneath, what do i do?

@dadudziii 5 жыл бұрын

Body mount chop

@MrCoolProjects 5 жыл бұрын

I cut the metal it was rubbing on

@loganloessin1848 5 жыл бұрын

Jack Daye you need a realignment

@2eZfOru 7 жыл бұрын

Cool! Didn't opt for extended studs instead?

@KantstandlamGarage 7 жыл бұрын

My brother didn’t want to do that. If he got new wheels, he didn’t want to worry about getting open ended studs if he opted to not use the spacers later.

@radioactiveload 7 жыл бұрын

i made that mistake on the 4runner, it was a huge pain in the ass to swap the old studs back in after i got aftermarket wheels and ditched the wheel spacers

@matthewgarland77 6 жыл бұрын

Rule #1. Don't use an impact gun.

@robcg04 5 жыл бұрын

Matthew Garland agreed. Stock studs are only 80# spec.

@MrAdams-vf8sr 5 жыл бұрын

Rule #2: don’t put spacers on a vehicle with no lift and stock tires.

@Yeah_na 5 жыл бұрын

Orion Adams damn it!

@gillesbolduc863 Жыл бұрын

@@MrAdams-vf8sr why?

@gillesbolduc863 Жыл бұрын

@@MrAdams-vf8sr why?

@richardg6949 6 жыл бұрын

Hmm interesting, any rubbing?

@KantstandlamGarage 6 жыл бұрын

Richard G none at all really. He recently got new wheels and tires and it does rub now. So we did the body chop.

@Tacomaholic 6 жыл бұрын

No anti-seize? Going to be fun trying to take those off in a few years.

@colinsandlin8575 5 жыл бұрын

Can you use loctite and anti seize on the same stud?

@cesarcantu378 5 жыл бұрын

@@colinsandlin8575 I'm pretty sure he meant on the backside of the spacer where it meets the rotor. I just bought spacers and the instructions say to put anti-seize in between the spacer and the rotor.

@colinsandlin8575 5 жыл бұрын

@@cesarcantu378 Thanks! Very helpful as I'm about to do this in a few weeks.

@jeremyturnbull6299 4 жыл бұрын

Really? The shop that beautiful and there’s no torque wrench

@josuenieto7736 5 жыл бұрын

Hi what is the size for the spacers

@buzzydj 5 жыл бұрын

1.25 inches

@UncleFjester 4 жыл бұрын

Why? Is this an ethnic thing to have stock wheel sets sticking out from the fenders?

@WerkToday 3 жыл бұрын

Yes,..Ethnic Americans of all Blood lines have been doing this for years.It pays respect to Our Ancestors love of cool looking rides.Our Ethnic Traditions run deep and we look forward to moving up maybe someday to 2''.. It's Fashion, and function. Love your channel.

@cesar2917 3 жыл бұрын

What’a hilarious is that you literally went and out and installed the same damn spacers.