No video
DIY WIND SIMULATOR with SIMHUB
Рет қаралды 161,556
Күн бұрынTutorial on how to make and setup a DIY wind simulator for your racing sim by using SimHub...
PARTS
Fan ebay.us/HkY0LE or BG bit.ly/2NAcG2f
Arduino bit.ly/3BTiGLF
Motorshield ebay.us/kZEghN
12v Power supply for 1 fan BG bit.ly/3SflVCC
12v Power supply for 1-4 fans bit.ly/2OJTLOY
Bolts M4x 50mm ebay.us/FkwPMe
Nuts ebay.us/gwZtmq
USB cable ebay.us/NPTenC
DC Jack ebay.us/70WDIV
3D parts Amstudio - bit.ly/2MDm2Hd
This site contains affiliate links for which I may be compensated
Tools
Solder bit.ly/3oQsyhe
Soldering Iron bit.ly/3cWeEYh
Wire bit.ly/3zSeUAs
Wire cutters bit.ly/3Bz8acd
Wire strippers goo.gl/4PFXny
My Soldering Iron ebay.us/gUIMh3
This site contains affiliate links for which I may be compensated
3d printer bit.ly/3zRHPVf
3D Filament bit.ly/3Jy1fC4
Micro screw driver bit.ly/3boPNvI
Third Hand bit.ly/3SoZsmT
Heat Proof Mat bit.ly/3SonQ7Q
Thank You for watching, all questions are welcome.
- Want to see a tutorial or project built, leave your suggestions in the comments.
- Please Share the video with a someone who would like this!
- Subscribe to AMSTUDIO channel for more great content!
/ @amstudioprojects
MY SIM SETUP
Fanatec CSW 2.5 Wheel base
Fanatec F1 carbon, BMW, Universal Hub, McLaren wheel
Fanatec CS V3 Pedals
Fanatec Handbrake V1.5
Fanatec H pattern + Sequential Shifter V1.5
Fanatec Rennsport V2 cockpit
Amstudio DIY Button BOX • MAKE THIS BUTTON BOX |...
Sparco Seat ebay.us/putCtx
Get Fanatec here: www.fanatec.co...
Copyright © AMSTUDIO 2018 All rights reserved.
SimHub- Credit Wotever
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
PERSONAL USE ONLY - NON COMMERCIAL
@FVRS97 6 жыл бұрын
You know...that time when you think that amstudio did everything...and he suddenly comes with something to open a whole new world to DIY Simracing. Congratulations! Greetings from Chile!
@andihartono92 6 жыл бұрын
i dont have simulator, and im still watch this. i only can imagine how its feel to play using all your setup.
@zilcard959 6 жыл бұрын
ME TOO
@Unknown-rk9qm 5 жыл бұрын
Me too!
@ivanjack8341 3 жыл бұрын
Start building!
@andihartono92 3 жыл бұрын
@@ivanjack8341 it needs money which is something i don't have. 😂
@ivanjack8341 3 жыл бұрын
You don't need that much money, i made my rig from rectangle bars with just a hand saw and a drill
@byGiNeSiToX 5 жыл бұрын
amstudio, the only channel with useful diy
@FatalFrostbyte29 5 жыл бұрын
by 2021 amstudio makes a video called: “How to make a DIY car”
@emidex8721 3 жыл бұрын
You got one month
@keanupanu 3 жыл бұрын
@@emidex8721 Its time
@samibinol 3 жыл бұрын
Where is it
@tomaslundstrom6690 2 жыл бұрын
I only came to see the car, can't find it?
@FatalFrostbyte29 2 жыл бұрын
@@samibinol He’s working on it, that’s why he wasn’t on here for 11 months /s
@ivanjack8341 3 жыл бұрын
i don't know if i said this before but , man.. you are a God! with your help I did Button box with ignition key , now I'll order everything is needed for the wind sim . thanks!!
@abdulfattah9189 6 жыл бұрын
Can you make a wrc style paddle shifters?please
@amstudioprojects 6 жыл бұрын
ok
@jackarabbit_ 6 жыл бұрын
amstudio Award for the best reply ever! “ok” XD
@user-dg1zr6jb4m 3 жыл бұрын
@@amstudioprojects ???????????? :(
@piotrhelios1518 3 жыл бұрын
@@amstudioprojects ??????? :(
@IgnazKevenaar 6 жыл бұрын
Cool! I did this a few years back with a 280CFM 12V fan and Project Cars. Really convincing experience.
@amstudioprojects 6 жыл бұрын
Awesome!
@Teddy_Bear312 5 жыл бұрын
Its not windy in a car though
@shawnforbes6495 2 жыл бұрын
@@Teddy_Bear312 it is with the window down, or air ducks through rear windows, on convertible and open wheel vehicles.
@Alex_1652 6 жыл бұрын
You are so creative, keep up man,we appreciate that.
@Alex_1652 6 жыл бұрын
Is there any way to get these projects?
@christianstef9292 6 жыл бұрын
Wondering what's next, maybe a set of exhaust to generate some smoke 😁. Nice one mate great video as always!
@baczys 6 жыл бұрын
We want DIY pedals with integrated rumble motor!
@steveduerr6367 5 жыл бұрын
fanatec clubsport pedals v3 inverted
@user-ej5jh7kc4k 6 жыл бұрын
So cool i need one and by the way can you make a speedometer for simhub because you did the tachometer and the boost but i need the speedometer
@MrSabifa 6 жыл бұрын
Great video as always, I would love to see a solid sequential shifter as a diy project!
@ultra727 6 жыл бұрын
Great project amstudio my dude. Wind, motion and VR would be amazing for open-wheel cars. The trifecta of sim racing if youd like to call it that
@muscled-dog 6 жыл бұрын
I Love your DIY Projects! Please, considere on some day doing an 2dof motion seat! That would be amazing!
@_eh. 6 жыл бұрын
@amstudio, Maybe you could do an update for rumble pedal settings with SimHub?
@akroutsamo 5 жыл бұрын
ok im really enjoyed and gather more information about your builds and modification you made your setup but i cant wait you make a FFB steering wheel using arduino uno , rotary encoder and a steper motor along with the shifter and the pedal (y) and keep up the sharing for the open source community
@AdrianFourie 6 жыл бұрын
Like all your other videos.......very very professional. Tx for the content.
@martinbpunkt1683 5 жыл бұрын
Great Tutorials!!! My question: Can I combine 1 Wind Simulator Fan and 3 Rumble Motors on 1 Motorshield?
@stoney268 4 жыл бұрын
Would like to know that too :)
@mercury7912 6 ай бұрын
Do you use one controller for 3 rumble motors and one fan?
@vxtwist6325 5 жыл бұрын
Yesssss been waiting for you to do this.... Let's go
@tengkuiskandar5611 4 ай бұрын
Could you do guide to built using pwm fan without motor shield?
@alexmvk_ 6 жыл бұрын
Why this channel is so good
@BartDeSmet99 6 жыл бұрын
Awesome idea! Any idea on making a H-shifter using real car components?
@amstudioprojects 6 жыл бұрын
Sounds good!
@imnota 6 жыл бұрын
Use some kind of fwd shifter like a vw shifter for example because rwd shifters are usually a rod going directly into the trans so you won't be able to do much without the trans.
@dennyrulos4847 6 жыл бұрын
I'm actually going to build something wow. Thanks!
@justgrayyy105 3 жыл бұрын
I WAS LIKE, "WHAT IF THERE WAS A SIM FAN THAT BLEW AIR ON YOU IN AN OPEN COCKPIT VEHICLE?!?" AMSTUDIO HAD THE ANSWER ALL ALONG!
@NRG1991 4 жыл бұрын
The fan in your Description has 4 wires.. does it work?
@dubtube6691 4 жыл бұрын
Thank you so much for the Tutorial
@brodeur212 5 жыл бұрын
You should sell plug n play kits
@bjsracer 6 жыл бұрын
Another great tutorial mate
@movingtargetproductions5046 7 ай бұрын
I'd use some of the same things, except integrate it into a cockpit A/C system
@TMCHL 5 жыл бұрын
Dude ! 81K wow keep up good work :)
@amstudioprojects 5 жыл бұрын
Your long term support is appreciated, Thanks man!
@Odysseus38 2 жыл бұрын
How would you do this with a 4 pin fan ive been trying everything and its not working
@TheEpicolor 2 жыл бұрын
Can this be combined with the RUMBLE PEDALS setup on the same Arduino and shield? Or need separate ones? If not can it be use with other Arduino and shield versions?
@Zaurkin 6 жыл бұрын
Great work!!! Keep it going!!!!!! Well done!!
@MaxHBoss 5 жыл бұрын
Im 100% certain that i don’t need your tutorials cuz I can’t make shit, but boy I do love your videos for some reason lol
@Chad711m 5 жыл бұрын
Came to youtube to search how to hand stitch a steering wheel cover. Oh look a new amstudio sim video. Watched the whole thing. Maybe it's time I buy a 3D printer.
@amstudioprojects 5 жыл бұрын
Hey Chad! Yeah they are pretty handy for projects.
@victorqn 7 ай бұрын
Thanks for the video! I’m actually following the instructions and works fine! But the fan is always running in a min speed while plugged to the power.. never reaches 0. Is there any way I can completely stop the fan when the car is not moving?
@bigchew1513 6 жыл бұрын
Another Great Video..I hadnt Saw Any New UpLoads From Ya For A While...Glad Ya Bak At It ..O AN ConGrats On Getn Ya Store Up N Goin To...Looked Good ..N Keep Up The Good Work..
@teimonkauppa1002 6 жыл бұрын
Nice please make smth related to trucks , would really help
@parkersanderson180 11 ай бұрын
It makes it so realistic
@Wheeliedevil 5 жыл бұрын
This might be better for a motorbike sim, since it's not that windy inside of a car.. Really cool idea and video.
@funkytransport Жыл бұрын
GT and other racing cars have air pipes in them giving this exact type of airflow... do your homework dude.
@hugomsmarreiros 5 жыл бұрын
Why didn't you use the alimentation barrel already present on the UNO board?
@parkersanderson180 11 ай бұрын
That’s so awesome! I love it
@mehmetbaran3447 3 жыл бұрын
Hi, i just tried that diy but all i am getting is some electronic sound and fans are turning too slow. all power gains in max, pw at 400
@KOOOORAY 6 жыл бұрын
NEVER FAIL TO AMUSE ME BUDDY. so far i made the stalk project. bmw dash project. and nextion display project. im still making the motors for my pedals then im going to make this. and the turbo gauge.
@ripcity2869 7 ай бұрын
My board didnt come ready to plug into arduino. I have to solder plugs first.what did u skip that part ? Or did i buy wrong one?
@Harismauk 4 жыл бұрын
Do you have any advice for what to do if the fan's are emitting a high pitch squeal when not at 100% duty cycle. I've tried two different models/makes of fans now and the system emits a horrible high pitch whine when at low RPM's. I'm a little stumped as to what is causing it or how to remedy it. When at near or 100% the squeal goes away and is just replaced with the fan noise itself. Thanks
@antoine3957 6 жыл бұрын
Thank you so much for this video
@keithpate406 4 жыл бұрын
Any way to setup the software for the new simhub update? A few of the parameters in the video are not available in the speed drop down menu. Anyone have any knowledge or ideas?
@KonJamo 5 жыл бұрын
...great but then you tested it inside a car with cockpit, not open wheel class :D dude teh realizms man! keep supporting Wotever and his SimHub!
@simracer1256 3 жыл бұрын
It was a KTM I think which is open
@VuaizakuMedia 6 жыл бұрын
Can your next video be on your total sim hub setup?
@erkitonuri 6 жыл бұрын
Some time ago I saw a video about the wind fans for simracing and though when will amstudio make DIY for that.
@olivierlanguedoc 12 күн бұрын
Anybody found a good mounting system to mount the fans on an extruded aluminium rig?
@fjm.4017 3 жыл бұрын
Great video, can you please update the explanation with the new version of SIMHUB? They are different screens.Thank you
@NJdeck 2 жыл бұрын
Hi! Great job! I would make it too, but I don't know what kind of fan it needs exactly? Thanks!
@kartuxo2821 5 жыл бұрын
great contribution!! has already made a car steering wheel with your ideas ..... But this time I had a problem, the fan seems to have no strength and emits an annoying sound ... what can it be? I followed the tutorial carefully ... thanks in advance.
@juanjogrion5722 5 жыл бұрын
I can use the Shield Motor v1 Driver L293D to control the engines ?
@paytufo 6 жыл бұрын
Is this compatible with the rumble pedals?? The way to do it is the same, but could it work together? Even with the same arduino and shield?
@louisbabyCT 5 жыл бұрын
I was also wondering about this. But I don't think so. To my knowledge, the sketch you load onto the Arduino is application specific. If you load the "Sim Wind" sketch, then load the "rumble" sketch afterwards, you will erase the first sketch. If you could merge the 2 sketches, it could be done, but for ease of use, and fault finding, I would purchase another Arduino, and build both. In fact, that's what I did...
@robblanchard3146 5 жыл бұрын
@@louisbabyCT It is compatible. I setup the rumble pedals first, then used the 2 extra outputs on the motorshield for 2 fans. Really easy and works great. Make sure to use a 12v power supply with enough current to feed your fans. My power supply is rated 2.5 amps.
@c.j2527 5 жыл бұрын
would an L298N be a better idea then the stepper shield?
@MasterSpark9000 5 жыл бұрын
What are the polarities of the DC jack adapter?
@ryanchenoweth5673 5 жыл бұрын
Thank you!
@akpanjennings 2 жыл бұрын
Why not plug right into the Aduino?
@lucvandenbosch4844 4 жыл бұрын
You should try to make a Fuel Gauge next
@bertram-raven 2 жыл бұрын
I found it better to use a four wire PWM fan. This means you don't need a motor-shield. Instead you put the full 12v to the fan (bypassing the Arduino) and use the PWM signal direct without worrying about power draw.
@lambchop4800 2 жыл бұрын
possible to send detailed instructions? cheers
@Hgamer999 Жыл бұрын
Hey bro I would really appreciate it if you could make a video on this or something. If you could really bypass the motor-shield then I'm down for it. If you can't make a video any helpful links or instructions would be greatly appreciated. Thanks!
@get_outdoors Жыл бұрын
Looks like a bull sh#ter too me!
@gnokketto7423 4 жыл бұрын
great tutorial but on mine WindSim if the FAN is not power to 12V make a noise... any suggestion ?
@fjm.4017 3 жыл бұрын
Hello, good video. Let's see if you can help me. I have 2 4 pin fans and I have the Arduino Uno R3 and the Shield v2.0 motor board. The question is how do I connect and in what order the 4 wires to the Motor Shield board? I have seen your videos and you only connect two cables. Thanks in advance.
@togl5308 2 жыл бұрын
did you figure this out? also doing the same thing
@jordangartner8483 2 жыл бұрын
@@togl5308 What about you? Did you figure it out haha. the 2 wire (listed as 4 wire) fans in the description are disco'd
@togl5308 2 жыл бұрын
@@jordangartner8483 the 4 wire ones don’t work. Had to return mine. There are resistors and other things involved with getting the 4 wire ones to work
@nopowerlaboratory 6 жыл бұрын
More tutorial with usb encoder!
@umutdegismen 6 жыл бұрын
Can we use this arduino code with the shakeit code which is already uploaded to arduino+motor shield for using pedal vibration motors? Or do l need a second uno?motorshield?
@robblanchard3146 5 жыл бұрын
One uno and motorshield will do 2 pedals and 2 fans. Use a power supply with enough current. Mine is 2.5 amp.
@BasEerdenKeuning 6 жыл бұрын
Can you make an tuturial on how to make an suquential shifter with out an 3d printer?
@digitalspirit7025 3 жыл бұрын
Can we do the same thing, but depending on whether the windows are open or closed?
@steveyp94 5 жыл бұрын
can I use one arduino to control both my pedal motors and fan motors? I'm not sure how to tell motor 3/4 to be used for the fans. Motor 1 is selected for brake, motor 2 for gas. Would appreciate some advice thanks!
@rickd955 5 жыл бұрын
Great project, bought all that's needed right away.Unfortunately I have a problem. Simhub recognizes my Arduino Uno, but the moment I physically install the Motorshield it's keep connecting saying "unrecognized device". Any suggestions?
@nikolasberbaris7718 5 жыл бұрын
Song?
@tehgusbus2716 4 жыл бұрын
How are these fans vs noctua industrial 140mm fans?
@EricGibson1 3 жыл бұрын
Why do u want to run the power from the top board and not the bottom board?
@itzlifzt9501 3 жыл бұрын
It works with farming simulator plz
@bladerunnerpeter 6 жыл бұрын
Eres el número uno,que máquina,muchas gracias,por compartir tus inventos
@baibhav820 6 жыл бұрын
Let's get more serious with sims
@pirozcontractor6006 6 жыл бұрын
Nice vid. I want to ask a favour I'm sure others will love. Can you do a video on Content Manager for AC, like tutorials on installing it so it properly works and not just how to use it. It's a pretty good mod apparently. No CM tutorials have this, and I'm having issues where the game fails to load (just says "Race Cancelled" and launches the original game, but not directly to the race as it should when I press "Go")
@ricardofasanello2394 3 жыл бұрын
Hi man, congrats for your channel, I love it. I have facing trouble to setup the fans, mostly because I am very ignorant on arduino and I have SimHub 7.3.7, that the layout is completely different from your video, could help me out? Thanks
@steliosschetakis2801 5 жыл бұрын
Hi - please can you tell me if sim hub supports set up with monster motor shield with seaflow fans for more power? thank you in advance
@teomman 6 жыл бұрын
Damn boy next step is real car i guess
@makefred 5 жыл бұрын
Hello. Great video.I bought everything and it works great ! Is it possible to buy the 3D printed parts, plz ?
@bart-680 6 жыл бұрын
Very good 👌
@Hgamer999 Жыл бұрын
I love this project and am really considering making it. Just one question though... How would you connect a 4-wire fan to the stepper? Since there are 5 ports I am not sure which ones you would put the 4 wires into. Any help would be really appreciated!
@abdullahsalman9167 Жыл бұрын
The fan would feature two particular wires; red (positive) and black (negative). Just use those and ignore the rest.
@parisgr 6 жыл бұрын
Do you have or can you do simhub stuff with a plain arduino (no shields)
@amstudioprojects 6 жыл бұрын
Something like this kzfaq.info/get/bejne/q5ubjc2YxNmulJs.html
@parisgr 6 жыл бұрын
amstudio Yep, but can i use a arduino uno and make my own led bars, i have like 50 leds of every color Edit: guess i have to buy, can't find what chip the led bars use and if i found it it would be very complex
@OliverPohl 4 жыл бұрын
Is it necessary to connect to the board direct to the pc of can it be connected via a usb hub And why do you put off the jumper on the above board?
@Coelho3005 6 жыл бұрын
Can you please try to make a loadcell mod for the g29 pedals ?
@lafamille2839 5 жыл бұрын
Bonjour monsieur merci énormément pour ce tuto tres tres inscrutif vous etes le meiheur je vous soutien énormément petite question a 2min37 je n arrive pas a charger ? Sur la carte arduino pourtant jai fait ce que vous m avais fait mrrci de m aider
@waelbadr4724 4 жыл бұрын
hi, is it the same when i connect an instrument cluster for vw golf mk4
@lambolim2178 2 жыл бұрын
Why is my fan not spinning when testing, so frustrating
@CzajaFabian 2 жыл бұрын
fan plugged in incorrectly, maybe?
@privatepengu 5 жыл бұрын
How can I mount this to my Playseat Challenge without having a button box? And, in case I decide to build a button box, how do I mount the button box aswell?
@KimAreZ06 4 жыл бұрын
This looks really cool. I will order the parts today and start the project. Just 1 question: Is there made a box for the Arduino and the motorshield? Would be really nice touch to have it all in a small box !
@KimAreZ06 4 жыл бұрын
I found this. Maybe its usable?
@FabienMarsot Жыл бұрын
where can i fou d arduino code for all your project ?
@kanadskyvictor6512 5 жыл бұрын
if i do 2 fans do i need to do split for wires or i can do 2 more cables on side from firstr 2 from first fan? please and thank you
@michelevitarelli 6 жыл бұрын
Will this work with project cars 2?
@amstudioprojects 6 жыл бұрын
Yes
@Gazjamesvr 4 жыл бұрын
hi love these how to vids great stuff bought the file for this and when i downloaded it came down as apk file so i can't print it any suggestions please
@daudrattle9558 5 жыл бұрын
Can i use any other motor driver in alternate of that motor driver ?? If i can use any other driver then please tell me
@daudrattle9558 4 жыл бұрын
can i use L293D motorshield instead of this Adafruit MotorShield ???? Because at my place adafruit motor shield is cost much higher then other motor shields. waiting towards your reply....
@GaryRowe63 3 жыл бұрын
Are you able to update this for the latest SimHub. I can't get my SimWind working. The screens have all changed. Thanks
@banfy211 5 жыл бұрын
Hi Amstudio, thanks for your great videos. Planning to do the wind generator and the pedal rumble mods: Do I need two Arduino boards or can I do both mods with a single one? thanks
@banfy211 5 жыл бұрын
i can answer now, one arduino+1 motor shield can handle up to 4 motor/fan, so both mods!