Yes they are very happy with the horse! Also proud of their dad that build it :)

It could be also awesome to have a rocking horse for adults. Mine I have already tested with to adults on it already 😉😊🐴

Hi here. There is a very nice thing to do. Here is a list of the materials that I have used: Legs: Front: 70mm x 45mm (width x depth) Back: 70mm x 50mm (width x depth) Length: 1 meter each Body: Slats: 13 pieces, 2 meters long, with dimensions of 60mm x 20mm Body length: 1 meter Wooden Panel/Glue Panel: 20mm thickness, and if possible, the thicker, the better. You need a panel to cut out three round circles with a diameter of 480mm. For the head: Wooden panel of 30mm thickness with an additional 20mm wooden panel glued to both sides. for the ears: this link should work: 1drv.ms/b/s!AkZ8nI_jC6cHii-dib2atoG5Keit?e=cdoP6c for the head: 1drv.ms/b/s!AkZ8nI_jC6cHh32q_cgMTk_wXqQz?e=u6bhpY I hope this will help. If there is anything else that I could help you with. Please let me know.

Thanks a lot! 👍

Thanks a lot!

Thanks

Mersi pentru comentariu :). I am dat mai multe mâini de baiț, nu am mai arătat asta în video.

Merci beaucoup. Ma fille est très contente de l'avoir !

What do you mean?

@@liviusdiyworkshop1012 for put in your window and stuff like that

@@user-yf4rn4ok4q I See now what you guys mean, a Dala Horse :)

@@liviusdiyworkshop1012 )

I will give you the Infos tomorrow

I have uploaded a small video regarding horses legs. I hope it will help. 👍

I have put 2 new ones. A link for a word Dokument and one for a pdf. Let me know if it is working now?

@@liviusdiyworkshop1012 Yes, it works, Thank you

@@ahmedezzat4738 thanks for your message and that you’ve let me know about the link problem. Take care

Hi thanks a lot. I will upload it this days somewhere and come back to you with the link. 👍

Hi again. I have put the link for the horse head prints in the description: 1drv.ms/u/s!Arn58m_1cGgfbluacb67gTeq9rY?e=BdfoJO

@@liviusdiyworkshop1012 You're great!!! Thank you so very very much :)

I guess you can find some online. But this was self made :)

Not working, can you provide another one

Hey, thanks for the message and letting me know that the link is not working anymore. I have updated the link and added also an archive with the Head prints as Fotos. Let me know if it is working now for you. 1drv.ms/f/s!AkZ8nI_jC6cHlDFyqz_GgT9-JWxs?e=EfuGJQ

so mine are 48cm, but the last plank needed to be smaller in wideness than the others. So if you are using Planks for the body 6cm wide you will need to cut circles with a diameter of 49,5-49,6cm, therefore the last plank might fit well or needs a bit taken off from its 6cm wideness. The best is the pit the last body plank at the bottom, like this it will not be noticeable if it is smaller or the space between it and the near one is wider. I hope it helped my explanation. Take care

Unfortunately it is self made. I do not think there one like this to buy.

Hi. Sorry for the delayed answer. Here you can download the file: 1drv.ms/b/s!AkZ8nI_jC6cHii-dib2atoG5Keit. I will put the link in the description as well. Please tell me if it worked for you, I used this pattern to help me make a closer ear form. The rest was just creativity.

In the Video description there are 2 links!👍

Do you mean the horse?

@@liviusdiyworkshop1012 yup I want one

@@svhmma_ most of them you can buy them, of course there are not like mine. I did mine a bit stronger and add some unique things to it. I would not sell mine though :)

@@liviusdiyworkshop1012 thanks for the information!, do you know where I can buy it?

@@svhmma_ it depends where you live. There are different shops in each country. Where are you from?

Danke. Es hat mir sehr viel Spaß gemacht es zu bauen. Leider habe ich nicht eine Liste gemacht, weil teilweise Materialen schon gehabt haben. Ich kann in der nächsten Tage eine grobe Liste zusammenfassen und mich bei dir wieder melden.

@@liviusdiyworkshop1012 Sehr gerne !

@@naturesalvaa BEINE vorne: 70mmx45mm BxD hinten: 70x50mm BxD Lang 1m jeweils KÖRPER: LATTEN: 13x2m 60x20mm. Körperlänger: 1m HOLZPLATTE/LEIMPLATTE: 20mm Dicke. Wenn möglich, je dickere desto besser. Man brauch eine Platte zum 3xRundkreise mit 480mm Durchmesser auszuschneiden (die Platte hatte ich schon gehabt) Für den Kopf: HOLZPLATTE 30mm mit zusätzlich 20mm beide Seiten drauf geleimt. Ich hoffe es wird helfen und ich kümmere mich über eine saubere Materialliste in den Beschreibung hinzufügen.

Top, Danke. Das wird mir definitiv als Orientierung weiterhelfen. Danke 👍🏼

I will post them in next days. I am not at home at the moment.

@@liviusdiyworkshop1012 Do you mind like saying the hight and length

@@justyouravaragehorsegirl3122 no I mean the measurements for the wooden parts, no?

@@liviusdiyworkshop1012 yeah but also the hight and length if you dont mind

@@justyouravaragehorsegirl3122 will do.