No video
Peugeot 308 1.6 HDI Auxiliary belt & tensioner replacement
Рет қаралды 31,097
Күн бұрын
@diydaly 2 жыл бұрын
Check Euro car parts - tidd.ly/3lIO7xA (use discount codes on site) Check "Car Parts for Less" - tidd.ly/2LNEwIn (use discount codes on site) Auxiliary belt eBay - ebay.us/7XHiLN New upper tensioner Ebay - ebay.us/kOORla Tools used : Milwaukee 3/8 Drive Mini Impact driver - ebay.us/Pg8ilg Milwaukee Battery ratchet - ebay.us/zlfRSl Screwdriver set - ebay.us/FAX8k9 Socket set - amzn.to/3eGx2Ak Ring Inspection Lamp - amzn.to/3gGWHcG Ratchet spanner set - ebay.us/oZlIMs Spanner set - amzn.to/2DlwUZm Check on my video on how to replace the timing belt on this same engine: kzfaq.info/get/bejne/m7mGl7lyqLCmnJc.html Check out my other Peugeot videos : kzfaq.info/sun/PLDTPJANi9HjrjQWtWOX7mVwjWNp-1D484
@tiswas2002 2 жыл бұрын
Excellent tutorial! will be doing mine shortly and this will be of great help. Super job my friend look forward to the next one! 👍
@diydaly 2 жыл бұрын
Glad it was helpful! thanks for the comments, much appreciated 👍
@edn5170 10 ай бұрын
Cheers Mate, good tutorial.
@diydaly 10 ай бұрын
Glad it helped, thanks for the tip! much appreciated
@sailortownlad3735 2 жыл бұрын
Handy video...good man.
@diydaly 2 жыл бұрын
👍 thanks mate
@kevinpalmer7452 2 жыл бұрын
Nice work 👍
@diydaly 2 жыл бұрын
Thanks Kev! 👌
@toyotoe3732 6 ай бұрын
Thank you
@diydaly 6 ай бұрын
You're welcome
@michaelking3065 Жыл бұрын
Nice video! What's the recommended mileage change for this? I can't find a definite answer for this, not even from the main dealer
@diydaly Жыл бұрын
There isn’t usually a specific interval as it’s done on inspection every service , as a guide I’d say every 50,000 if it hasn’t been changed
@YouAintReady4Me Жыл бұрын
Mines literally just gone and car is on 80k
@groutness9052 2 жыл бұрын
That pully mine vibraters had it changed once buy main dealer and its wobbling again to local garage they sed uts normal but wen u changed theres no play wit so ever
@diydaly 2 жыл бұрын
I should move slightly with engine but not a lot , ive known then to vibrate more when the alternator clutch pulley has failed
@charlottebutton9681 2 жыл бұрын
Hiya what would this job cost parts and labour?? My 308 is currently in a garage and I just would like to know I'm not being ripped off thanks
@diydaly 2 жыл бұрын
Hi at a garage depending on location / garage / quality of parts etc you could expect to pay anywhere between £120-£200 area
@domenicodegennaro1976 2 жыл бұрын
Hello good job. When the start & stop at departure comes into operation it makes a noise like a belt slipping. Is the problem belt and tensioner?
@diydaly 2 жыл бұрын
Yeah I’d say one of your tensioners might have gone mate , definelty worth checking them
@domenicodegennaro1976 2 жыл бұрын
Ok thank you very much
@diydaly 2 жыл бұрын
@@domenicodegennaro1976 👍
@methem4720 2 жыл бұрын
Have you got a video on replacing the water pump on this car?
@diydaly 2 жыл бұрын
Not on this exact one but I have done on a Citroen ds4 with the same engine .. the timing belt / water pump side of things will be the same kzfaq.info/get/bejne/i6yEgJxz2dvQcaM.html
@methem4720 2 жыл бұрын
@@diydaly legend...thankyou
@methem4720 2 жыл бұрын
@@diydaly another quick question. I have the 308 1.6hdi. Its over heating. The interior heater is ice cold. Yet the water in the coolant over heats and I get the stop car error. I'm thinking its waterpump. Your thoughts would be appreciated
@diydaly 2 жыл бұрын
@@methem4720 👍
@diydaly 2 жыл бұрын
@@methem4720 yeah could well be mate , can u see any coolant coming out the return to the bottle?
@skysurferuk 2 жыл бұрын
8:00 called a grenade pin?
@diydaly 2 жыл бұрын
Not heard it called that before but could imagine some people calling it that as sounds a good name for it! 👍👍
Le Cliquet Express
Рет қаралды 38 М.
Jan Jouke
Рет қаралды 3,7 М.
Adrian Dragan
Рет қаралды 196 М.
ADRIAN CHAZA TUTORIALES
Рет қаралды 20 М.