THE 2-BUCKET CAR WASH METHOD IS DEAD. HERE’S WHY |

Рет қаралды 47,319

10 ай бұрын

Are you a fan of using two buckets (one for "washing," the other for "rinsing") during your car wash? The idea goes something like this: you dunk your wash mitt in the wash bucket, and then touch the car for the contact wash. Then, you dunk the mitt in the "rinse" bucket against the grit guard -- hoping, somewhat blindly, that the dirt all comes off and STAYS in that bucket. You then dunk your mitt back in the wash bucket for fresh suds/soap and off you go.
Welp......it's time for that method to be retired. Put out to pasture. Laid to rest.
This podcast is all about the why!
Find Incredible Suds here: bit.ly/IncredibleSuds
DIY Detail Rinseless Wash: bit.ly/RinselessWash
(Oh, and as promised...here's the link for the 10-towel method: • 10-towel Rinseless Was... )
Web site: diydetail.com/
DIY Detail Podcast: • Costly detailing mista...
#autodetailing #diydetail #yvanlacroix #carwash #claytowel #detailing #ceramiccoating #howtodetailacar #detailing101

Пікірлер: 414

@andrewkemp9445 10 ай бұрын

I absolutely use no buckets. As a mobile detailer, I use 2 wash mitts per car, foam twice as per your method. Much easier and safer. And I'm from Australia...

@diydetailofficial 10 ай бұрын

Thanks for sharing

@augaureliusserious 9 ай бұрын

I've never used the two bucket method. 6 mitts, at least.

@davidsteckley8846 8 ай бұрын

Well I use water and soap. Who doesn’t like to play in the water

@archiepezek 10 ай бұрын

You guys are awesome. I received my Incredible Suds and used it for the first time today. It's an awesome soap, both out of the foam cannon and in the wash bucket. Great foam and a lot of lubrication for the contact wash. Thank you.

@diydetailofficial 10 ай бұрын

Thank you so much for the support!!

@joelcleare 10 ай бұрын

Makes sense to me. Thanks guys. I was looking for a reason to do a one bucket 👍. I’m just a DIY’er and maintain two clean cars.

@diydetailofficial 10 ай бұрын

Glad to help!

@chadamos7297 10 ай бұрын

I’ve watched several videos that Pan has out there about foaming, and effectiveness of several soaps on foam canon. Higher ph soaps for sure removed a little more road film or grime than ph neutral soaps. But simply foaming and rinsing doesn’t cut it. Have to have contact wash. I did see DIY received a few awards in Pans 2023 top products! Nice work fellas.

@diydetailofficial 10 ай бұрын

Thank you

@willdamian1066 3 ай бұрын

I’m going to try something new this weekend. Pre treat lower panels with an APC. Foam car with a splash of rinseless. Rinse then contact wash with a splash of rinseless and reset. lol we are so overthinking this 😅

@diydetailofficial 3 ай бұрын

It’s a detailers prerogative to do so.

@maryhoffman2547 10 ай бұрын

I can't wait to see this one. It will help me learn. As usual! Thank you diy detail for sharing such great information.

@diydetailofficial 10 ай бұрын

You are so welcome! Looking forward to it

@bradley8753 10 ай бұрын

pre soak, foam, rinse, foam and one bucket full of top quality micro rags soaking in my favorite soap. No rinse, just discard rag and grab a fresh one! I developed this before I ever seen it on Social Media because I own a Veloster N. Yes it's a sweet car but Hyundai paint will scratch if you breath on it to hard lol. Love the content guys! Thanks

@diydetailofficial 10 ай бұрын

Great method!

@duncan5657 10 ай бұрын

Very good video guys, totally agree with the logic of foam rinse , re foam wash then rinse again , common sense to me, will be adopting / adapting to this wash option from now on for sure.

@diydetailofficial 10 ай бұрын

Thank you

@Ozzcaddy 10 ай бұрын

Thanks guys to the indepth discussion on the two bucket method. After trying various methods over the years since getting into DIY detailing at home, the method I now use on my car which is parked outside on the street 24/7, that has Opti-Coat Pro+ coating that is now 4 years old, I will spray an all purpose cleaner (APC) onto the dry paint let it dwell a couple of minutes, then I spray layer of foam on top of the APC, let the foam dwell no more than 5 minutes and pressure washer rinse. Then using only one bucket with grit guard and ONR, using the Black Sponge and a microfibre mitt, I do a contact wash of one panel at a time. After each panel is washed, I then use a drying towel with a drying aide to leave a topper on each panel and glass. The car finish is sparkling and I have added a little extra protection.

@diydetailofficial 10 ай бұрын

Nice!! Solid 😀

@leardi58 10 ай бұрын

Love the vids keep them coming stay healthy everyone

@diydetailofficial 10 ай бұрын

Thank you!!

@jeromeboily 10 ай бұрын

We need more video on your rinsless wash !!! Used onr for long now i have switched to DIY and love it so much more.

@diydetailofficial 10 ай бұрын

We have many Rinseless wash videos

@kimnewling5728 10 ай бұрын

Ive been using 1 bucket with soap and multiple mits for 2 years. Now im foam/rinse/foam with 1 bucket and really enjoying it. Thanks!

@diydetailofficial 10 ай бұрын

Great to hear!

@AlxDv 10 ай бұрын

Great video. Makes a ton of sense. Will be using this to clean my Lexus truck later today. Cheers.

@diydetailofficial 10 ай бұрын

Great to hear!

@BlackIce1619 10 ай бұрын

I already threw my second bucket away.... actually I labeled it Wheels :)

@diydetailofficial 10 ай бұрын

Perfect

@ryeguy88 10 ай бұрын

I've enjoyed the hybrid method of a foam pre-wash, then rinseless contact method. Just used it tonight on my personal vehicle as it was heavy with pollen, bugs and some fresh sap. Foamed the car, let it dwell, pressure rinsed off then foam sprayed rinseless and went to contact, it was perfect. Nice option if you want to speed up the 2 foam method a little.

@David-Godin 10 ай бұрын

This is a smart fast method

@diydetailofficial 10 ай бұрын

Great tip!

@sudhirjaipur 10 ай бұрын

Thanks for an informative e video as always. I used the two foam method for washing my car and then waxed it with Collimate 845. Excellent results.

@diydetailofficial 10 ай бұрын

Great to hear! Glad we could help out in some way

@massformationpsychosis7681 10 ай бұрын

Great video as usual!

@diydetailofficial 10 ай бұрын

Glad you enjoyed it!

@georgemcfarland5484 10 ай бұрын

I Agree, two bucket causes more scratches and swirls, you are dunking dirty wash media into the soap bucket even after you used the rinse bucket. Least amount of chances, use one bucket with grit guard, never pre-rinse. Foam on dry, rinse, foam again and contact wash, rinse, use drying aid, done.

@diydetailofficial 10 ай бұрын

Well looks like you don’t need to listen to the podcast then 😂 sounds like we are in agreement

@RMVDETAILING 10 ай бұрын

Thanks for this info. Saves time and product.

@diydetailofficial 10 ай бұрын

Glad it was helpful!

@paulattanasio3061 10 ай бұрын

I use the one bucket method. Foam the car, while it’s dripping off, reach into my one bucket and pull out a cold beer! Yes, the one bucket method is fill it with ice and beer😄🍺

@diydetailofficial 10 ай бұрын

Interesting…

@60trickpa 10 ай бұрын

I use a modified 2 bucket. Spray car with rinseless then foam then spray off. Then foam again before hand wash with 1 bucket with soap and about 6 wash mitts, each mitt does a section of car then not used again I put it in a empty bucket

@diydetailofficial 10 ай бұрын

Very meticulous of you:) Why spray and then foam on top out of curiosity?

@60trickpa 10 ай бұрын

I figure the waterless will loosen dirt and the foam will drag it off the car. I know it is just my overachieving syndrome :)@@diydetailofficial

@titone14 10 ай бұрын

2 foam method and I just use a single wash bucket and throw 5 microfiber towells in it and forget about all that, just put it aside when its dirty and pick another one.

@diydetailofficial 10 ай бұрын

Good call!

@kouradasmith3720 8 ай бұрын

Thanks for this. I use a bit of a hybrid method at times. Pre rinse with a rinse less wash on a dry car. Then hit the car with a foam - usually ph neutral. Rinse. And then spray the car again with rinse less wash and then clean via rinse less wash method one bucket. Blow dry and then finish off drying with beads maker.

@diydetailofficial 8 ай бұрын

Nothing wrong with additional safety.

@amberatkinson4230 10 ай бұрын

I use rinseless. Pre-treat with rinseless, let it dwell and then add APC on top of that if needed. Rinse off and then to a contact wash with rinseless. I still have car soap but I only use it in a bottle that has a foaming spray trigger. Sometimes I like to use that on plastics around the car and in door jams.

@diydetailofficial 10 ай бұрын

Thanks for sharing!

@toml.8210 5 ай бұрын

Pre-rinsing a car is a good thing: Besides washing off the loose dirt, it cools the car on a warm day, so you don't have to work frantically.

@diydetailofficial 5 ай бұрын

Yes

@baja1980s 10 ай бұрын

Finally what I’ve been saying for a longtime. 2 foam method is the way to go.

@diydetailofficial 10 ай бұрын

It sure is!

@thesamsquatch5224 10 ай бұрын

Nick is in distress, this is going to be awesome

@diydetailofficial 10 ай бұрын

Lol

@neilwalker5041 10 ай бұрын

Great video and to confess I have never used the two bucket method. I always foamed and rinsed and foamed again and then used one bucket with three wash mitts. Probably overkill using three mitts until DIY got me hooked on rinseless wash. My advice is to use what method you enjoy. Thank you guys for a really tough topic on the video!

@diydetailofficial 10 ай бұрын

Exactly! Thanks Neil

@crushbent 9 ай бұрын

ive been two bucketing for over a year. im trying multiple microfibers / 1 bucket for my next detail. also added P+S absolute rinseless so im excited to see how much time i cut. waiting for DIY rinseless to be in stock...lol

@diydetailofficial 9 ай бұрын

@crushbent it will be back tomorrow

@dekoeneridder2452 10 ай бұрын

I'll bet they will say it's the two guys method that kills it. I somehow always see TWO guys delivering awesome results😂

@diydetailofficial 10 ай бұрын

Lol you’ll have to watch and see

@dirrecgaming 7 ай бұрын

You are right guys!

@diydetailofficial 7 ай бұрын

Thank you

@stevenv9224 10 ай бұрын

Yes I like this method much better than the 2 bucket. I feel it a time save to me 👍🏼👍🏼👍🏼👍🏼👍🏼

@diydetailofficial 10 ай бұрын

Great to hear!

@davidminor1254 4 ай бұрын

Hi guys! Ever since buying my 2023 Mazda CX-5 in November I've been trying to learn how best to wash the exterior and what products to use. The downfall is I use a garden hose and forced to do the washing outside. I've gotten confused as to what products to use that will be safe for my car. It seems like every detailer has favorite different products they like. Recently I purchased many of the SudsLab products for washing and for the tires and wheels and for the interior. I am so confused as to what to do or where to start because I just used to go out and soap up the old cars, rub a sponge or mitt over and rinse them off with the water hose.

@diydetailofficial 4 ай бұрын

Our most recent videos are back to basics with no pressure washers etc.

@loic4691 10 ай бұрын

Just the title intrigues me, can't wait to watch this one.

@diydetailofficial 10 ай бұрын

Should be a good one!

@loic4691 10 ай бұрын

@@diydetailofficial it will, as usual 👍

@pinoscoccia4997 10 ай бұрын

GraIe mille per questa spiegazione. Spero porterete presti i vostri prodotti anche in Italia 🇮🇹

@diydetailofficial 10 ай бұрын

Hopefully soon!

@theredscourge 8 ай бұрын

I have my own 2 bucket method: fill 2 buckets, dump half of one on the roof, dump the other half in a pump sprayer to hit the sides and crevices, then whenever I need to clean the mitt or sponge, hold it over the empty bucket and dump water from the full bucket onto the sponge, then take that used water and dip a wheel brush and barrel brush in it to use it on the wheels. Mark the two buckets differently and you can ensure you never put any brake dust on your paint, except at the very beginning if you didnt clean the wheel bucket since last wash. Less efficient, but no wash media recontamination and no foam cannon required.

@diydetailofficial 8 ай бұрын

Nice!

@takedown6470 10 ай бұрын

I use two buckets to store my towels and other mittens. I use same method. I first use the foamer, let it sit and then rinse, then foam it again. When i almost done foaming my car, i foam multiple mittens. Then i do my contact wash, using both sides of my mittens.

@diydetailofficial 10 ай бұрын

cool! Interesting technique

@LasseJohannsen1 10 ай бұрын

Love this topic☕️☕️

@diydetailofficial 10 ай бұрын

Thank you

@pavanSingh-ts5ym 7 ай бұрын

I really am glad Yvan and Nick decided to discuss the two-bucket method, as a car enthusiast, I realized how much damage I was doing to my truck by taking it to car washes places, I had bought a brand new Tacoma (black) and after 6 months noticed swirl marks and scratches all over the truck, I was so upset that I said, no more, I'm doing my own washes from now on. I have learned allot from Yvan, and his knowledge and experience is so valuable. His methods work and are cost effective, I was spending so much money on products and materials, my only question is what about DI water Yvan/Nick? Or anyone for that matter?

@diydetailofficial 7 ай бұрын

With proper wash technique and products, it’s not required.

@pavanSingh-ts5ym 7 ай бұрын

@@diydetailofficial I am going to purchase your products and give you my results, thanks..

@diydetailofficial 7 ай бұрын

Thank you, please check out our facebook group. bit.ly/DIYDetailFacebookGroup

@ShoresMobileWashandDetail 9 ай бұрын

I detailed a car last Saturday and I did not use a bucket at all. I use d foam first rinse foam again, two of us with wash mitts. I loved it. No more buckets for me!! Ok, just the one for wheels.

@diydetailofficial 9 ай бұрын

Good plan

@GeorgePap99 10 ай бұрын

I've recently re-started doing 2 foams instead of 2 buckets and it's so much easier not having to carry around the vehicle 2 buckets. Btw, the only love marks I've induced to my vehicle are from when I didn't even know the ultra basic fundamentals of car detailing. And for some reasong it's always windy when I decided to wash my car, it really bugs me 😂😂

@diydetailofficial 10 ай бұрын

The wind is a pain for sure, but that’s detailing outside 😂

@leo-ub6nb 10 ай бұрын

Tell me about it. It’s never the perfect weather every time I go to wash my truck. Too sunny, too windy, slight overcast that then becomes rain on a day that was supposed to be clear, neighbor is mowing their lawn and grass and/or dirt is flying towards my driveway. And the wind always seems to just go in my direction, ALL. THE. TIME. 😭

@GeorgePap99 10 ай бұрын

@@leo-ub6nb Well, at least I only have the wind then 😂

@TouchstoneMPWD 10 ай бұрын

I just started Mobile Detailing in March 2023. I was using the 2 bucket method and would do a pre-rince. However, i noticed that a lot if the dirt/dust didnt come off causing rinse bucket and soap bucket would get dirty. So i started using a separate microfiber towel during my pre-rinse. I'll use my pressure washer in 1 hand and my towel in another and spray and wipe at same time. I've noticed that the cars are cleaner and my customers are happier.

@TouchstoneMPWD 10 ай бұрын

All my detailing is on site and usually in the sun. So I can't let the soap sit too long if I had an indoor shop I could

@diydetailofficial 10 ай бұрын

Thanks for sharing

@waxmanvids5015 10 ай бұрын

I want to commend both of you on your pacing and articulation with this video. Especially Nick your background in news media and interviewing shows through with excellence!

@diydetailofficial 10 ай бұрын

Thank you

@diydetailofficial 10 ай бұрын

thanks very much!!

@phoenixautodetailingscotla2159 10 ай бұрын

I haven't used the 2 bucket method in ages 😊

@diydetailofficial 10 ай бұрын

Great!

@nomad509 10 ай бұрын

I've been playing around with wash methods on my daily. I have an abundance of rinseless wash so I usually soak the car from a Marloex sprayer and once it has sat on the surface the car is rinsed off with distilled water. Since I am an apartment dweller, I do not have access to flowing water so I am forced to use limited amounts of water that results in one bucket of suds plus using the IK Pro 12 for foam. In my testing using one pad I tend to get minimal grime at the bottom of the bucket. I usually like to store extra pads and soap in my second bucket and plan on testing out two pads on my next wash to see how effective the Gary Dean method can be in this scenario. I do plan on introducing a dedicated foam prerinse step to washes in the near future that validates what you guys discussed.

@diydetailofficial 10 ай бұрын

Thank you

@nomad509 8 ай бұрын

@@diydetailofficial Just wanted to give an update.. one wash bucket and three wash pads are all you need to maintain limited contamination below the grit guard. Plus I cannot believe I forgot to mention that I use a portable electric washer for rinsing.

@1ricekake 10 ай бұрын

I foam, spray off, foam, spray off. I then have three rag company towels in my bucket of rinseless wash. I wash the top to hood to trunk flipping sides on each section. The towel then gets set aside. I continue the same process on the left and right side of the car. My towels never go back into the bucket

@diydetailofficial 10 ай бұрын

Thanks for sharing!! Very meticulous process for sure

@David-Godin 10 ай бұрын

This is my process but with a laser cut sponge. I'm going to try the multiple towel method and see how it works. Thanks for sharing!

@Mark-hu9tf 10 ай бұрын

I foam, rinse, refoam and then wash with two buckets for extra safety. Main reason is that lower panels and underbody still seem to have some grit.

@diydetailofficial 10 ай бұрын

Good call, the initial foam/rinse/foam is the most important part

@72mespo 9 ай бұрын

I tried the two foam method using a high pH pretreat foam and then your Incredible Suds second as lubricant for the contact wash. Great results and very clean wash bucket at end of the day. Method definitely works.

@diydetailofficial 9 ай бұрын

Thank you.

@72mespo 9 ай бұрын

@@diydetailofficial when are you coming out with a high pH foam so I can avoid paying the Brits?

@diydetailofficial 9 ай бұрын

@@72mespo compare it to DIY Detail Incredible Suds, you may be pleased to not have too use 2 products. If you find that DIY Detail Incredible Suds isn’t enough, add 2-4oz of DIY Detail All Clean to your foam cannon to get a little more bite.

@braedenblack6116 9 ай бұрын

I foam, rinse, foam as you described and still use two buckets, works great for me.

@diydetailofficial 9 ай бұрын

No harm in added safety.

@stephenlouden480 10 ай бұрын

I've never used the four bucket method. i use the 4 towel method flipping after each panel. keep the surfaces wet and soapy and keep your towels clean.

@diydetailofficial 10 ай бұрын

Thanks for sharing

@Secret_Sun33 10 ай бұрын

APC Foam, scotch brite then squeegee off. Gives me that matte finish with racing stripes.

@diydetailofficial 10 ай бұрын

😂😂😂

@DerPic 10 ай бұрын

Gave up on two buckets years ago. I spray out the wash mitt with the pressure washer before dunking back in wash bucket.

@diydetailofficial 10 ай бұрын

That’s an option for sure

@aalfonso4706 10 ай бұрын

I’m thinking of changing my routine when not just doing a rinseless. I’m thinking Rinse, foam, rinse, foam, contact wash while foam is on, final rinse while vehicle is wet spray the whole thing with Rinseless then dry.

@diydetailofficial 10 ай бұрын

You want to pre treat for that first step *before* rinsing. So get rid of the first "rinse" in your sentence and that looks good for sure. Have fun!

@ginger_monkeey 8 ай бұрын

I wash the mitt with a pressure washer in-between each panel / side. Keeps the mitt super clean and single bucket required.

@diydetailofficial 8 ай бұрын

Great tip!

@nejcpanic6704 5 ай бұрын

Very good content and really amazing talent for explaining Yvan and the other guy you add ground to the duo. I agree with you on the subject completely. But one thing I dont understand. Why do you skip the part on the inside of the doors ans why do you skip the wheel arches? God bless.

@diydetailofficial 5 ай бұрын

We do them , just those get edited out to not make the videos too long.

@P-47D_theJug 10 ай бұрын

I’m fairly new to this game but I felt with time the two buckets was kinda of redundant. I like the idea of a second foam. Thanks for sharing

@diydetailofficial 10 ай бұрын

Glad we could help!

@toml.8210 5 ай бұрын

I only use the 2-bucket method when I wash a truck that's REALLY MUDDY, or ull of concrete splashes, tar, etc. My car only needs 1 bucket. It's usually very clean.

@diydetailofficial 5 ай бұрын

Thanks for sharing

@teknykill 9 ай бұрын

I got corsless power washer Ik foam 2 and 12 ik sprayer too. Thx for information

@diydetailofficial 9 ай бұрын

Thank you for watching

@swiftbutfun6316 8 ай бұрын

I foam.rinse.foam wash with 1 bucket. In-between each panel or 2 I then rinse my mitt. I still keep a 2nd mitt for the very bottom/ underside of the car. I've used this method for a long time. This isn't new for me. But still very informative 👌

@diydetailofficial 8 ай бұрын

Thanks for sharing!

@yoji8130 10 ай бұрын

I would like to see what a pressure washer induced scratch looks like.. I don't feel as it is digging into the paint but more as flicking it off

@diydetailofficial 10 ай бұрын

It’s wash induced marring.

@Franko.Details 10 ай бұрын

what about about a one bucket hybrid wash, foam with incredible suds, rinse really well, then finish diy rinseless & legacy sponge hand wash. i feel like the inc-suds would just add that extra punch 👊🏽

@diydetailofficial 10 ай бұрын

You could definitely do that. If you had a way to spray or foam on Rinseless before the Rinseless Wash contact wash that would be great but we're talking about the "ultimate safe" wash technique, which doesn't mean your suggested method is unsafe. It's gonna be great in most cases, and of course you don't have to rinse at the end! I just always like the product on the paint before contact wash for lubrication and maybe even peace of mind:)

@rickp6689 10 ай бұрын

Gents, Thanks for the great info-question-I do not have a pressure washer so is it possible/efficient to fill wash bucket with Incredible Suds and us a Marolex 2000 Axel Foamer sprayer to apply rinse and repeat? The proceed with contact wash and iron remover and your fine grade decontamination towel.

@diydetailofficial 10 ай бұрын

You could foam on with Marolex, hose off, and foam on again and contact wash if you so desire. Nothing matches the fun/thickness of the foam cannon, but you can usually get really good suds from a foamer:)

@jazzman9469 10 ай бұрын

Great video guys! I just purchased the Marolex Foam Sprayer because I don't own a power washer. Will your Incredible Suds work in this foam sprayer? I have tried 2 different products that state they can be used in foam sprayer/cannon. Thank you guys!

@diydetailofficial 10 ай бұрын

It should! It definitely foams great from an IK, if you want shaving cream foam you might need to change dilution from typical foam cannon 32:1 dilution and add a bit more incredible suds. If you’re okay with foam being a little thinner that’s still a great dilution.

@mpoppe 8 ай бұрын

My Method: Snow on the dirty surface + rinse+ Snow + two bucket method+ rinse + blow drying + drying aid. It may seem exaggerated, but this is how I've been doing it for over 15 years and I've never had any major problems with this methodology.🙏

@diydetailofficial 8 ай бұрын

Excellent

@haroldcottam8174 10 ай бұрын

Great video. If the foam from the second application dries before I get to do the contact wash will that be a problem?

@diydetailofficial 10 ай бұрын

It won’t damage anything, but it should be avoided if possible. If it does re-wet and continue.

@woocoheed 10 ай бұрын

I did the 2 foam method with Incredible suds today. Put about 2.5 oz in my MJJC, ended up having way too much left over in the cannon 😅

@diydetailofficial 10 ай бұрын

that's either way too much or just right (depending on whether Nick or Yvan fills up the foam cannon lol). Nick likes more product but it's rarely if ever a "good" idea haha...unless you love the sight of super thick suds and then it's the perfect idea:)

@corrybowers5078 10 ай бұрын

“Traffic film is oils” that being said, these oils would also attract and hold dirt and not all of that fine grit will be “washed” away by foaming. I think this method with the addition of multiple wash mitts/plush towels would be the safest method that can reasonably be achieved. Regardless of what we do I don’t believe it possible to remove all grit before a contract wash. At best we are minimizing the potential for damage.

@diydetailofficial 10 ай бұрын

Being meticulous is for sure the safe way to go 👍

@jojocrawdaddy7487 10 ай бұрын

I also like to pre foam the entire vehicle and watch it dwell before rinsing. However I am just not fast enough to foam the vehicle and do a contact wash after that. The foam always ends up drying on half the vehicle, even when I push my speed to the limits.

@diydetailofficial 10 ай бұрын

Not a big concern.

@Cyprus_Property 10 ай бұрын

Thank you guys, great video. It raises another question about pressure washers. If you're 'rinsing' the car rather than blasting off the grit, etc. first with a 2000psi+ pressure washer, do you need such a powerful machine? I appreciate you may need something more powerful to blast the dirt from wheel arches and undercarriage, but is it necessary for the paintwork?

@diydetailofficial 10 ай бұрын

A pressure washer is a nice tool to have, but far from necessary.

@David-Godin 10 ай бұрын

Please do a foam, rinse and rinseless wash in the foamer and then rinseless and dry video. I think that is the fastest wash and safe too

@diydetailofficial 10 ай бұрын

Good plan.

@jsclayton 10 ай бұрын

Can you clarify the discussion at 11:58 about pre-treating with rinseless wash or all clean? I didn't notice mention of either in the bus video. Do you add rinseless or all clean to the foamer with incredible suds? Or do you pre-spray them on, then apply incredible suds on top? Or do you rinse off the rinseless before applying incredible suds, ie pre-treat, rinse, foam, rinse, or pre-treat, foam, rinse, foam rinse? 🤔

@diydetailofficial 10 ай бұрын

Here's the video: kzfaq.infozXdQPdzl43o?si=vckIDoEYEOPUMMKp Off camera, we tried Rinseless Wash and All Clean and we found Incredible Suds *alone* to work just amazing. Obviously what's on Yvan's bus is unique to some of the conditions it goes through, so not all grit grime traffic film etc will be created equal across all vehicles. I think Incredible Suds alone is a fantastic pre treatment (as we saw on the bus, and from all of our experience using it), if you want to go wild lol you can add a bit of All Clean to your Incredible Suds foam lance but I don't think it's necessary.

@MetalDeathGoat1 7 ай бұрын

Thanks for the video! What wash mitt would you recommend if Chenille is the worst? I use a mix of Chenille and Cyclone wash mitts. My wash method is Foam, Rinse, Foam, 2 bucket method and I have 4 wash mitts to play with if I do multiple cars.

@diydetailofficial 7 ай бұрын

The cyclone style is favourable

@marcelogarcia5094 5 ай бұрын

Totally agree. And This is for people who are into being thorough with how they wash their cars. If you don’t like it don’t watch video

@diydetailofficial 5 ай бұрын

Thanks for watching!

@seventysschev 10 ай бұрын

Foam > rinse > foam/wash kinda reminds me of how a touchless carwash works, but not necessarily with the high or low pH chemicals. Thanks for the food for thought guys!

@diydetailofficial 10 ай бұрын

Thanks for watching and taking the time to comment! Obviously touchless also doesn’t *touch* the vehicle after that either :) A contact wash is crucial for 99% of washes to do a real good thorough job 👍

@stephent9990 8 ай бұрын

@@diydetailofficial so no rinse after 2nd foam? if not are you using the foam from the 2nd foam to contact wash or using suds in a bucket on top of the 2nd foam?

@theredscourge 8 ай бұрын

@@stephent9990 either works, might depend on how dirty it is though, or how sunny outside.

@MrChuckwagon55 10 ай бұрын

Rinseless is still king.

@diydetailofficial 10 ай бұрын

It’s great and you can foam it if you want too :)

@MrChuckwagon55 10 ай бұрын

@@diydetailofficial - That’s a great point. I just find it so much more easier, faster and convenient. I can literally do a full car wash in the parking lot while at my wife’s doctors appointment.

@ac7384 6 ай бұрын

Is it a better idea to use the dirt lock scrub wall for bucket wash. Or does it not really matter ?

@diydetailofficial 6 ай бұрын

It's nice to have a grit guard or dirt lock, just for insurance in your one bucket

@dailyDIYdude 10 ай бұрын

I’ve got an IK 2 gallon sprayer. What’s your thoughts on using that as the first or second foam and how much Incredible Suds should I mix with the 2 gallons of water? Thanks fellas

@diydetailofficial 10 ай бұрын

1/2 Oz per gallon, yes it works great

@wescat2 10 ай бұрын

Yvan & Nick. What are you feelings about a high alkaline pre-wash like (KCX Super Foam or Bilt Hamber Touchless) vs. APC pre-treat before Incredible Suds for contact? I'm glad you brought up Pan. I know he's an advocate of using a dedicated pre-wash. Love these videos!

@diydetailofficial 10 ай бұрын

DIY Detail All Clean at 15/1 is a great option, but try simply DIY Detail Incredible Suds, it’s a ph of 8.5, and has high quality surfactants that clean very well.

@wescat2 10 ай бұрын

@@diydetailofficial Thanks for the reply. Can't wait to try it!

@ct181 8 ай бұрын

Different strokes for different folks. I have been double foam one bucket for a long time now. I just prefer it to 2 buckets, but that is me. I also use 4 different mitts, and discard into empty bucket after a panel or 2

@diydetailofficial 8 ай бұрын

Good plan

@ac7384 6 ай бұрын

Could you also use the 1 bucket method and just rinse your wash mitt off with pressure washer before the next dip into the wash bucket. Would that be safe to do so also ?

@diydetailofficial 6 ай бұрын

Yes you can!

@ultrapepe2905 5 ай бұрын

Foam rinse foam and 5 mitts with 1 bucket never putting a dirty mitt back in the bucket I reckon.

@diydetailofficial 5 ай бұрын

that would work!

@chrisginoc 9 ай бұрын

My old detail guy, before I learned and started detailing my own cars at home, used to do the one fresh microfiber towel per panel/section then toss into dirty pile, method and he swore by it. On my garage queen I sometimes do this method if I'm paranoid. Are you guys saying foam first on a dry car, let it sit then wash it off? Ive been so used to wetting the car first before foaming at the Step 1 part.

@diydetailofficial 9 ай бұрын

Correct, it allows the first foam to better clean.

@jabecrowell4247 9 ай бұрын

I am an apt in a wheelchair and I love in an apartment complex, how do I safely wash my vehicle? Please leave links two products and videos.

@diydetailofficial 9 ай бұрын

In your situation I would Suggest using Rinseless Wash. For the roof a helper to get up there.

@360010xbox 10 ай бұрын

So for the foam rinse foam we are using one bucket with our soap solution, how many wash mitts is ideal? Currently using the two bucket method but would like to try this method out.

@diydetailofficial 10 ай бұрын

Just one wash mitt in a bucket with a grit guard in there

@samthetoolman8068 9 ай бұрын

I always foamed rinsed and foamed again and the washed with a wash mitt rinsing if I needed to. But I agree with the Australians it is a no bucket wash

@diydetailofficial 9 ай бұрын

Thank you

@johnevans715 10 ай бұрын

If it’s hot and in full sun like in Florida wouldn’t pressure washing the car first to cool down the paint better than foam first ?

@diydetailofficial 10 ай бұрын

No difference

@user-kv6cr8sv3f 9 ай бұрын

Truth be told, I've been using the foam-rinse-foam method for years. Along with one bucket and 5 mitts. No need to ever rinse a mitt and reuse if you have a few mitts.

@diydetailofficial 9 ай бұрын

Nice! Makes sense

@renuing 10 ай бұрын

Does All Clean foamed on as a pre-treat clean the same as Incredible Suds? It is much more concentrated so more economical. Then rinse and foam on Incredible Suds for the contract wash? Thanks!

@diydetailofficial 10 ай бұрын

It is stronger so a bit more caustic-when you pre treat with it, try not to get the windows. You just need to be a little more aware of it dwelling and potentially drying but if you’re smart it’s a great pre treat. Then you could rinse and foam incredible suds

@mattheviewer 10 ай бұрын

Is it necessarry to use a pressure washer to apply phone or will a good "garden hose" end sprayer work reasonably well?

@diydetailofficial 10 ай бұрын

They work okay.

@detailzautodetailing643 10 ай бұрын

I pre foam then rinse then add 6 mitts along the car then foam. A but over kill but I do the contact wash extremely fast and safe

@diydetailofficial 10 ай бұрын

nice!

@spigdon 9 ай бұрын

A bit of a slow process, but post the two foams I prefer using one side of wash mitt per panel then high pressure clean each side before going back into the single soapy bucket. Never a chance of the mitt holding grit.

@diydetailofficial 9 ай бұрын

Nice.

@miguelc3033 10 ай бұрын

I washed a really dirty car yesterday and did foam, rinse, foam, contact wash with 2 bucket method.

@diydetailofficial 10 ай бұрын

Extra safety is never a bad thing

@Grantpa33 7 ай бұрын

Where do you guys get your clear buckets that you use?

@diydetailofficial 7 ай бұрын

Local restaurant supply

@phoenixgarage3101 10 ай бұрын

what do you do if your doing this outside and the foam dries before it can emulsify and take off dirt?

@diydetailofficial 10 ай бұрын

You should be cautious about foaming cars outside, and if you do so…try half a car at a time. Work in smaller sections if you can and out of direct sunlight, find shade if at all possible. You don’t ever want product drying on you if you can avoid it. Just re wet it if that happens and evaluate from there 👍

@pauljohnson986 9 ай бұрын

So when you foam, rinse, foam, and go in for the contact wash with no bucket, are you coming in with a dry wash media or wet?

@diydetailofficial 9 ай бұрын

Wet

@quincyb8046 10 ай бұрын

What dilution to use DIY rinseless wash in IK pro foamer 12?

@diydetailofficial 10 ай бұрын

Try 32:1 and see if you like the foam at that dilution. You can always use more product, if you'd like, but know that you already have a much stronger dilution than the bucket or spray method so you have *plenty* of Rinseless in there for actual cleaning power if that makes sense

@tonykemper8896 Ай бұрын

which foam cannon do you guys like or recommend? the one I have doesn't foam like I see in these videos and im not sure if its the cannon or maybe water pressure. ive tried different mixture rates but I just received my incredible suds the other day so we will see if there is a difference.

@diydetailofficial Ай бұрын

Mjjc

@tonykemper8896 Ай бұрын

@@diydetailofficial thank you

@Sean-ij3mi 10 ай бұрын

How about foaming on incredible suds then pressure wash off then spray on rinseless wash and contact wash, does that work?

@diydetailofficial 10 ай бұрын

Yes, very well.

@dietmarwenzel522 9 ай бұрын

Nice video. 👍🏼 I unfortunately did not understand everything in English and hence my question: I know you like Rinseless a lot. If I ever do a normal car wash in between, I like to spray my car before I use the pressure washer. Is a Rinseless solution better or do you prefer a foam then? If you were to put it in percentages, what percentage would you give your preferred pre-spray method before the normal car wash?

@diydetailofficial 9 ай бұрын

They are equal. Use the one you prefer.

@whitegoodman7465 10 ай бұрын

Pre wash is pretty much why, pre wash is king. North America is way behind on the importance of pre wash compared to Europe. Doenst matter if rinseless, soap or steel wool is used to hand wash after, the goal should always be to get as much dirt off the car as possible before touching the paint, its common sense really. If you want to wipe dirt off instead of spraying it off, expect more scratches/swirls over time, even with a rinseless.

@diydetailofficial 10 ай бұрын

Thank you 🙏 agreed, pre foam/rinse is hugely important

@jojocrawdaddy7487 10 ай бұрын

Question: just before returning your mitt to the wash bucket, do you first give it a squeeze to try and purge any debris? Or do you just take that mitt right into the bucket and keep going? This is my OCD kicking in.

@diydetailofficial 10 ай бұрын

With the foam/rinse/foam before the contact wash there is nothing to purge.