#DIYDownforce

No video

#DIYDownforce

Рет қаралды 28,289

Күн бұрын

Join us as we start our new segment called #DIYDownforce. In this episode we will talk about our plan for the series and give a run down on splitter materials.
Check out our website for more information on Aerodynamics or to pick up aerodynamic components. www.ProfessionalAwesome.com
#DIYDownforce Blog Post- ProfessionalAw...
Thanks

Пікірлер: 29

@GearsandGasoline 5 жыл бұрын

Excited for the next video! I'm going to follow along and build my own splitter!

@kamranzaidi9694 2 жыл бұрын

This video is exactly what I was looking for. Straightforward, to the point, informative and funny

@OEMPlus 2 жыл бұрын

starting to get into this for my cobra. I just want to smooth the airflow under the front part of the car mainly.

@inmotionautollc7374 4 жыл бұрын

Thank you for this awesome diy series! Can't wait to make my first plywood splitter

@ClaytonYatescarenthusiast 3 жыл бұрын

Hey do you do development still? I'm looking for under aero for my 16 camaro ss race car

@ProAwesomeRace 3 жыл бұрын

You can get consulting help here: professionalawesome.com/consulting/

@ClaytonYatescarenthusiast 3 жыл бұрын

@@ProAwesomeRace great thanks

@kaj750 5 жыл бұрын

If you guys decide to produce a 10mm alumalite splitter for a CT9a, I'm in!

@FFAttack 5 жыл бұрын

Fantastic! Subbed

@Seargentmyself 3 жыл бұрын

So I understand needing some thickness for an aluminum front splitter, but do you need the same thickness for side splitters? I was thinking of using like .041 or .063 6061 aluminum to make some side splitters for my e92. I'm more interested in the benefits if keeping road gunk off the side of my car but if I'm going to put all the effort into building something nice I might as well to it right

@ProAwesomeRace 3 жыл бұрын

Are you referring to side skirts? The area below the doors of the car, parallel to the road surface? The forces aren't going to be extremely large there so you can go with a thinner material but you still need to be aware of flex. Once aluminum gets too thin it will wobble so get a couple of test pieces and see what you think. My guess is you won't like .041.

@2THPWR 5 жыл бұрын

Cool vid. Subbed

@induetime 5 жыл бұрын

Nice video! How do you bond two panels of 6mm alumalite in opposite directions together?

@ProAwesomeRace 5 жыл бұрын

Construction adhesive made for metals. You also need a lot of pressure.

@jdcarguy1242 5 жыл бұрын

You could also laminate thin aluminum to corrugated plastic making your own composite.

@ProAwesomeRace 5 жыл бұрын

@@jdcarguy1242 yup that's an option as well.

@pwnusll 2 жыл бұрын

Opinions on steel splitters?

@JDomino 4 жыл бұрын

Just bought a car to get into time attack, the carbon honeycomb. Who sells it and what should I look for in quality and structure content?

@ProAwesomeRace 4 жыл бұрын

There are many carbon suppliers, so it might be worth searching locally. Maybe reach out to the folks at spagesport.ca/ to get their opinion on structure as we don't construct many carbon splitters personally.

@reactor4 5 жыл бұрын

subbed

@YTJensengaming 4 жыл бұрын

Wow #jensentungol foodvlog and car

@gqh007 5 жыл бұрын

Fiberglass?

@mattcolley5124 5 жыл бұрын

Do you have a favorite source for 10mm alumalite sheets?

@ProAwesomeRace 5 жыл бұрын

Where are you located.

@DanielODonnellProAwe 5 жыл бұрын

I'd recommend looking for outdoor sign and plastics companies first.

@mattcolley5124 5 жыл бұрын

@@ProAwesomeRace Asheville NC

@ProAwesomeRace 5 жыл бұрын

@@mattcolley5124 I have a list of main distributors and it doesn't look like there are any in Asheville. The closest is Piedmont Plastics in Charlotte. You can try them or call local sign shops.

@sportybry7676 5 жыл бұрын

Any tips on alumalite sheet suppliers in Ontario, Canada ?