Make the best decision for the best outcome, regardless of cost or time involved. No use cutting corners and ending up with something you're not happy with and having to do it again the right way. Do it once and do it right the first time. All the best from Queensland Australia.

Whoever is watching this video, never give up on your dreams.😇

Nothing like MOPOWER IN A FORD FLAVOR!!!

That Jay Leno price is CRAZYYYYYYY! I like the old Bronco platform but there's absolutely no way that i could justify spending that much money on one.

He'll, go all out with the custom mounts. You summed it up in your own words.👍

You do realize you can notch that front cross member? There's also any number of potential T-cases that will work. This is where someone who knows 4x4's would help. It's also one more reason LS engines are so popular; the ability to move accessories around in infinite combinations. Ford's block casting/bracketless design saves them millions of dollars but, like the goofy overhead cams, it's a pain in the ass for everyone else.

$269K?! you know whats crazy is i use to/and still can build vintage 4x4s as well as modern vehicles, from the frame up...Recently we just finished a one off Early Ford Bronco with a coyote swap, and new everything on it fox shocks etc. it was no where near $270K...ridicoulous imo!

Loving this Build from Melbourne Australia Brother👍

Use the custom motor mounts you have come this far 😂

You a beast you make Puerto Ricans proud 💯🙏🏾🇵🇷Wepa

Let's go baby. Jay Leno and me are the same. Just like you

My favorite channel on KZfaq. Keep killing it guys.

Desi your missed. You gotta get back to put Jose on the right path..😅😂😅😂

Looking good 👍👍

Use the custom mounts!

Cut jay the check!

DIY it !! 👍👍

Not sure why you chose to add the commentary but this is one of my favorite videos of yours. I like this style of video. Keep it up

IMO, Use factory mounts! The factory mounts will absorb the engine vibration the best and make the Bronco feel refined and classy Aftermarket mounts almost always have stiffer durometer bushings which transfers excessive vibrations to the dash, steering wheel, etc....exposing any and all rattles. It cheapens the feel of a car.

Not sure where i heard it, either from Gernade Motorsports or somewhere else. Since Bronco is more truck chasis you can't use the Mustang mounts. Go for custom mounts.

Go with the custom motor mounts to get the engine where you want it.

Let's Go! 🎉

You do know that Ford has a Engineering Tec support Line that can tell you the Angle of the Engine and the amount of Deg it needs to be at all so make sure you have the rear diff ratio that will work with the front other wise it will lock up or destroy one of them.

Ideally you want 2 or 3 degrees of slope down on the motor and nose up on the pinion. Drag racers point their pinion nose down a little more. Some older muscle cars have as much as 4 or 5 degrees of driveline angle. You just do not want the pinion nose pointing so far up that it intersects the output shafts imaginary line. But, the more straighter they are to 90 or "O" the less power loss you have.

For proper drivetrain geometry use the custom motor mounts which also lowers the engines center of gravity

Best recommendation is to start drinking tons of coffee again while working. You haven't shown that in a very long time..

New Raptor R in a 5.2 VooDoo engine Flat-Plan crank. A coyote is a 5.0 correct?

If your using the factory Dana 20 transfer case get a dual stick shifter.

DIY GANG!!

"Ur brand here" on the drill 🤣😂

And Stand By!! 😂😂😂😂😂 Hilarious!!!!!

👍🏻

Keep up the good work.

Bro if you going to build a car even better than Leno, than go with the best mounts you can have. And yes you still my favorite channel.

tnx for the video

Custom Mounts.. do it once and right

hi DIY GANG i love you guys i love what you do im learning so much me and my brother we do a lil abit of everything welding body work paint would love be happy to work by your side for a year no cost only layber as pay

❤

God speed..

Paint it as a Parnelli Jones race bronc tribute!!!

What a train wreck! Good luck!

Need more videos!!! 🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉🎉

love from india❤

Get her dun

🤩👍

👍🤙

Keep the vids coming I’m enjoying get out the sazon chic,rice and beans and get er done!

Tavarish now diy gang on jay leno

Does anyone know what happened to the R8s he bought?

There's more than 2

What happend to phoenix?

Luckily they didn’t charge you for everything you cut taking out that t-case

2004 didn’t have a coyote

Day 80 of asking jose to rebuild a truck for himself

0% progress again

Best way to make a Ford run; LS swap it.

Firsy

This video is lacked…. Anything

quit buying your machining tools at harbor freight,,, Jesus help him

We used CJ PONYPARTS. When we did our coyote swap.. they should have everything needed.

LOL. If I had 300k to spend in a car it sure as hell wouldn't be a ford.