Fuel Ox For the world's best fuel additives, catalyst, and antigel, go to FUELOX.COM use promo code DIYSEMI for 15% off every order! MUDFLAP For some great fuel discounts with out needing to use a fuel card, watch this video...kzfaq.info/get/bejne/gtByaLxnldaVoX0.html Download the Mudflap App onto your phone and use the promo code diysemi when signing up to receive $10 in free fuel!

Another way to check for air leaks is a spray bottle with soapy water, the problem with that first truck you looked at, might be an alignment issue or king pins, but you did a pretty thorough check, next time bring some rags to check the oil, check the fuel tank straps and see if the tanks have moved and that they're not leaking, most of the time my son and myself did our own servicing, oil change, filters, grease u-joints, shocks, can shocks, brakes to save cost, also did airbags, belts, fan clutch, sometimes we be out there till late in the evening, working on our equipment 3 Trucks and 3 trailers

I could sure appreciate that man going to look at a truck with me, I sure learned a lot from him today!!! A very nice,wise man, very informative too!!!

Good job ..very informative video.

Great job showing and telling, thanks for showing this I am learning things I wood not be looking for. Well thanks again see you next time see ya bye

I recommend you bring a tape measure with you so you can measure the ride height of the fifth wheel.

I would buy it. I drove a Mack for 3 yrs, no issues. It’s a little rough riding but holds it ground tremendously. 💰💰💰

Buy that money making beast

Super job inspecting the trucks!

Really good info here. Lot of stuff I never thought to check

I really like this video ...teaches me what to look for and pay attention to when looking at trucks 😀👏 thank you for doing this video 👍

Informative & thorough! Great job!

This was a very informative video it’s definitely going to help Me. Thank you

DYY , Good morning Mack is excellent truck , use to work in the oilfield with them awesome jobs done. Have a nice day Regards

very good video, thank you! fantastic... unbelived in spanish all the videos about Mack pinnacle are shit. I only see one video in english, your video, and it is pure gold. sorry for my English bro!

I’m looking to buy my first truck thank you very much this was very informational.

It's amazing how expensive things are getting

Really great advice. Thanks

wish i could hire this guy for a couple of hours

Thanks for this video .

You nailed it buddy!!!!

Great instructions 👌👌👌

Good job!!!

Thanks for the info.

Very informative video 👍

Awesome video!

Good video DIY

If they spray the frame and low on coolant run

My first truck as an Owner Operator is a 2013 CXU613 very similar to that one. I’ve had it a year and a half. Had to fix quite a bit it wasn’t as good s shape as the one your looking at but it’s a great running truck lots of power. Has Eaton 10 speed manual. I’m in Colorado mostly run mountains mostly. An overdrive transmission would be better however it has good power. I had it turned up from 445 hp to 505. K&N air filter helps power and fuel economy i’ve noticed. Put injectors in it and a few emissions related sensors I’ve driven Cat powered trucks most of my career and I’m pretty impressed with my Mack. Its not. Peterbilt but a good truck none the less.

Good stuff

I had an EGR cooler get a micro fine crack internally and didn't burn off enough coolant to make it noticeable my coolant would be down maybe a half inch in the tank at a time but would heat up and rise back up hot cold hot cold it stayed really close to the full mark and didn't give any indication that it was steaming out internally in the EGR , EGR is first emmisions component on the exhaust side so everything behind it got cooked, corroded or gummed up, long story short 2 trips to MHC who just threw parts at it then 1 trip to Cummins to actually diagnose and repair around $30k right now I own a 2000 pre emissions CAT and will do everything I legally can to stay in a pre emissions tractor.

Coolant leak is your water pump.

Boss man let's speak I'm looking at the same truck right now

10 years ago the volvo was better nowadays it's the freightliner. My company switched to volvos in 2016. Now were going back to freighliners. Volvos are in the shop over and over about 5x more than freightliners. These are bought new. If/when the rear mounted power steering pump bolts come loose on a volvo your talking 15k to 20k to fix. This is happening 500kish. The best volvo was a 99 with either a cummins n14 or cummins ism. Great mpg and always went over a million miles with a set only a set of injectors...way better than even the real ch macs. My 2 cents.

Mack's 😁💪🏽

The new Anthems do that too

I drove one and put 400k on it. Lifetime of 8.2 mpg with minimal idle. It was okay while under warranty... The owner eventually said it was the worst truck purchase for him (10 units) they were 2013 models.

Nice inspection, seems to be the same way you would inspect a car that runs on gas, just that there's different systems and parts in place on a big truck with a diesel and air brakes. I know about cars, motorcycles, small engines, etc. Can you make a video notating the additional systems in place on a diesel truck for a car guy that already understands how gas engines work?

Hey There, great content. You mentioned you were checking truck out for someone. Do you do that as a side paid service, assisting with search of used purchase? Thanks!

How its windshield wiper work means which button i push windshield water work

👍👊

oil looks dirty after 10 seconds of running

#Dammitboy Good job ascertaining the value of those trucks while acknowledging your own worth! 💩

Great video, actually considering the same truck. One question, does the dealer cover oil sample, and other testing or is that on you? I suspect you cover these costs. This is my first truck purchase. Many thanks

Great video I’m in the Market for my first truck and for some reason I keep coming to these Mack’s Recommend?? Any info helps thanks

Personally, I would never consider a volvo/mac because they are very expensive to work on being the fact that volvo has the market cornered on them and so there's few aftermarket parts available. I mean I'm sure they're great when there are no problems but when stuff breaks it can get expensive fast. I know this is the case with any truck but it is more the case with Volvo's. With that being said I'm looking at them a bit differently since your considering them. I respect your opinion in other words. And as you said being the way the market is, it may be something I need to consider that is if I can't find a Freightliner with a DD15 in it.

Hey do they ride on the interstate

Why not just stick with the century? Pre emissions to emissions? Idk if I could do it.

He sprayed painted the water separator wtf I would run

Personally I like mack but I've never driven one

So did you decide to get the Mack truck and if so, how did it run for you?

Yoooo

If that first truck is a "local" truck, then why did they get a sleeper cab? I'm not saying you're wrong, just trying to understand.

I thought you were a Detroit 12.7 kinda guy

6.5 mpg too low my 1988 kenworth with a big cam does 7mpg 😂😂

How do u test the oil ?

Was the first truck in Milwaukee?

Dud for the win. I'm getting 10 midroll ads on this video. Dud needs a YT premium account

Of course you skipped out on how to open the hood. That’s literally the one thing I cannot figure out on this truck and I cannot find it anywhere in the handbook and I cannot find any videos or answers on Google. I have this as a rental and it’s telling me the coolant is low. So can somebody here tell me how to open the damn hood

Are you getting your CDL lol w t f

And the prices are ?

Mac or Volvo ?

Friends don’t let friends buy Mack’s

Don't do it...lol.NO MACK TRUCKS...

Weed is Genesis 9:3(N.I.V.)Jesus is Lord

Para de mostra a sua cara mostra o caminhão

Injector cup seal leak

I am glad tat i subscrbe to your chANNEL. Coz you really helpful and provide very great info and for free all i can stay is thanks