No video
Dj Booth for under $200
Рет қаралды 35,028
Күн бұрынCustom Dj booth during this COVID quarantine. And yes, this cost me less than $200 to make ($177 to be exact, all links below). At the same time, I had the "expensive" equipment already.
NEED
$100 pine wood (for straightness)
Home Depot
$10 paint + primer interior white. Go to Home Depot. You will find it for $10 or less (1 gallon). The inexpensive stuff works for this.
www.amazon.com...
$14 aluminum plate for bottom of booth
www.amazon.com...
$3 neutrik power plug
www.amazon.com...
$8 xlr plug (x2) = $16
www.amazon.com...
$22 truss couplers
www.amazon.com...
$10 angle bolts (x4)
www.amazon.com...
$7 rack rails
www.amazon.com...
---about $177 in materials---
Gear you may have. But needed:
$157 truss section .75m (2.47 ft)
www.amazon.com...
$145 global truss steel base. Paint it white.
www.amazon.com...
$35 truss scrim
www.amazon.com...
$23 xlr cables. (x6) cables needed. Controller to mixer. Mics to mixer. Mixer to main out=$70
www.amazon.com...
$100 2u drawer with foam
www.amazon.com...
$210 Yamaha mixer
www.amazon.com...
$112 furman power conditioner. Find it used on offer up/eBay like I did. Save 50%.
www.amazon.com...
$400 shure blx mount rackable (x2).
www.amazon.com...
$13 square
www.amazon.com...
$7 paint roller + handle
www.amazon.com...
$50 sander
www.amazon.com...
$7 spackling paste
www.amazon.com...
$25 jig saw
www.amazon.com...
@stachemaster 3 жыл бұрын
Clever move to cut the drawer to fit the mics and external mixer. Looks great! Nice work.
@edeevents 2 жыл бұрын
Thank you
@DayNNyteDJs 3 жыл бұрын
Looks like you were more productive in quarantine than I was. Real nice.
@edeevents 3 жыл бұрын
Thank you
@djerniet350 2 жыл бұрын
Came out nice.
@keenanbhiro6746 2 жыл бұрын
pretty cool, thinking of making mine of plexiglass. You should buy a white dj skin also.
@chrisjinx69 Жыл бұрын
very clean work!
@jimmyhemp1 2 жыл бұрын
Well Done!!
@edeevents 2 жыл бұрын
Thank you
@BlazshoNikolov Жыл бұрын
Cool idea! I like it!
@allengallegos7238 3 жыл бұрын
Nice job 👍
@edeevents 3 жыл бұрын
Thank you
@ludwigalvarezhouseofgroove7116 2 жыл бұрын
Well done man I like it alot.
@djcar5181 3 жыл бұрын
Wow! Awesome job man.
@edeevents 2 жыл бұрын
Thank you
@randycedillo3954 7 ай бұрын
Hey brother hope you get to read my message I’m doing it to help . You can customize the size of the scrim I went with those people that fix sizes for suits and I told them about the measurements of my totems and they cut it made it looks perfect for like $15 , trust me brother your set looks really good but the scrim can be customized to the size to fit perfect it’ll give you a better look
@DjInTheGrooveAlexBarrios 2 жыл бұрын
Love dj booth ❤️
@djdannybhtx 3 жыл бұрын
VERY NICE BRO!!
@edeevents 2 жыл бұрын
Thanks.
@oscarvivas959 3 жыл бұрын
Nice job bro
@edeevents 2 жыл бұрын
Thanks.
@AusomeAV 3 жыл бұрын
Very Nice!!!!!
@edeevents 3 жыл бұрын
Thank you
@cccruz8839 Жыл бұрын
Great DJ content Ed. Will you send me the blueprint if you still have it. I'm trying to figure out how you connected the DJ control booth to the truss. Thanks & Respect
@anthonycamuccio2531 2 жыл бұрын
Hey man I'm interested if you could build me one?? how much would you charge
@edeevents 2 жыл бұрын
$1200 www.eddjent.com/woodworking-by-ed
@ianolson802 10 ай бұрын
Are you still doing these? If not do you sell the blueprints?
@johndu42390 Жыл бұрын
hello, do you have the plans for your DJ Booth please. thanks in advance
@happyweddingdj 3 жыл бұрын
Can you make a video with the final work? Great job!
@edeevents 3 жыл бұрын
I’ll try.
@djdavidgonzalez 3 жыл бұрын
Haha "the chingaderas" comment was great. But awesome job...I'm stealing your idea
@edeevents 3 жыл бұрын
Lol thank you
@edeevents 3 жыл бұрын
Do it! Level up!!
@djgrandauto8541 2 жыл бұрын
@@edeevents I just saw your video and I would like the plans as well.
@jameskeeneriii1707 4 жыл бұрын
Can you post a video of the break down and what case do you carry it in
@dankegod03 3 жыл бұрын
Yea. I will. I made a custom flight case for it too. First time making them.
@djelite757 7 ай бұрын
are you selling the plans to this?
@twinuts83 4 жыл бұрын
Super travail , pouvez vous m’envoyer des photos de votre dj booth par mail ?
@DJJeckyll 2 жыл бұрын
very nice! are you able to pack it up and move it to a gig with the controller still inside?
@oldschooldjernie Жыл бұрын
looks heavy how much does it weigh with the controller inside
@DjNissimNYC 3 жыл бұрын
Where are you from? I’ll pay you to make me one
@edeevents 2 жыл бұрын
In Cali. www.eddjent.com/woodworking-by-ed
@dynamicexcitement 4 жыл бұрын
Really Great job!! what kind of wood did you use for the top?
@dankegod03 3 жыл бұрын
Thank you. I used 1/2” MDF for the top.
@djsunnierockready9033 3 жыл бұрын
So question. How much for shipping and handling? DDJ-SX3
@edeevents 2 жыл бұрын
www.eddjent.com/woodworking-by-ed It’s $1200 for the booth. Plus $400-500 for shipping.
@DJDjayVarela 3 жыл бұрын
What Kind of Paint did you use?? Looks great
@edeevents 3 жыл бұрын
Simple white paint. Any paint really. Just use a lot of clear coat.
@williammancera4755 4 жыл бұрын
Looks dope.. looks like MDF. How heavy is it?
@dankegod03 3 жыл бұрын
Yes. The top and bottom is MDF. 1/2” on top and 3/4” on the bottom.
@edeevents 3 жыл бұрын
About 70 pounds total with all the gear.
@MeditationMelodiessounds 3 жыл бұрын
sweet man. what's the name of that white vinyl design you have on your laptop ?
@edeevents 3 жыл бұрын
Hey Fernando It’s simply just a sticker made at my local tshirt shop. Make the design at home and they will make a big sticker based on your laptop size. It was like $12 a sticker.
@karlousdavis8227 3 жыл бұрын
So how heavy is it?
@edeevents 3 жыл бұрын
About 70 pounds with all the gear in it.
@hhurakan Жыл бұрын
The chingaderras. Eso mismo
@hectorcalderon1829 3 жыл бұрын
How much would you charge to build another one?
@edeevents 3 жыл бұрын
I have the three types built at my house right now. You in southern Cali?
@hectorcalderon1829 3 жыл бұрын
@@edeevents no, North East Florida
@edeevents 3 жыл бұрын
@@hectorcalderon1829 I’m on my fourth one already. Shipping one to Missouri In two weeks. I’m selling them for $1000. You pay shipping.
@ronguy4420 3 жыл бұрын
What’s the size of the top?
@edeevents 2 жыл бұрын
22” x 43” x 8”
@dvrmusicentertainment 3 жыл бұрын
Bro do you sell this set up ???
@edeevents 2 жыл бұрын
I do. www.eddjent.com/woodworking-by-ed
@DJStephenPeters 3 жыл бұрын
Do you have a blue print or parts list to build?
@edeevents 3 жыл бұрын
I think I do. I’ll look for it and sent it to you.
@djdannepa1738 2 жыл бұрын
@@edeevents send it my way as well...
@angryrenaissanceman9684 2 жыл бұрын
@@edeevents Lol. If you're still sending it my friend. I'll take one. Nice work. Appreciation on the upload.
@djrobgons2112 2 жыл бұрын
I would love to have this too, plz
@JamesMellis39 2 жыл бұрын
Maybe I could grab one too pretty please…
@lcaise Жыл бұрын
vertical video....
Las Rocas Entertainment
Рет қаралды 16 М.