DJ Gear - How to run WIRELESS audio to speakers (Wireless Mic Speaker system)

Рет қаралды 28,788

3 ай бұрын

This is how you run wireless audio to speakers up to 1000 ft away!
This is the setup I used in this video
Audio Technica 3000 4th Gen Body Pack amzn.to/3PlwlRg
Body Pack Converter Cables
-1/4" Option www.nlfxpro.com/at-gch-guitar-input-cable-for-wireless/
- XLR Option (Prefer this now) www.nlfxpro.com/xlrch/
1/2 Wave Antennas www.nlfxpro.com/1-2-wave-470t530/
AA wired power amzn.to/3VnVqie
Contact Ben at NLFX for any questions you have as e can help get the right stuff for your specific setup. You also can use the IEM system instead of the mic converting I did, but I like the flexibility of wireless audio or a microphone. www.nlfxpro.com/at-wsss/
💡Need Lighting? bothlightingusa.com/
📲Need advice or just want to pick my brain for an hour?
calendly.com/fslmeeting/letstalk
👕 DJ LIFE CLOTHING (My Brand)
shopdjlife.com/
📺MY TOYOTA TACOMA CHANNEL
TACO RICK : bit.ly/2tGFUQX
📺MY DIY HOME CHANNEL
AVACADO HOUSE : bit.ly/37UeUBs
💻SOFTWARE I USE
-Vibo vibodj.com/
-HoneyBook share.honeybook.com/djrickweb
📸BEHIND THE SCENES @
Instagram: djrickweb
Facebook: DJRickWeb/
Mixcloud: www.mixcloud.com/ricky-weber/
💡My Company Info
Instagram: fusionsoundandlighting
Facebook: FusionFSL
🎧EQUIPMENT I USE AND RECOMMEND
Lights
-Wash Movers bothlightingusa.com/products/aura-1915
-Spot Movers bothlightingusa.com/products/mh-150s
-S4 Uplighting bothlightingusa.com/products/s4
-IR4 Uplights bothlightingusa.com/products/rf-4-mk2
-360 Tubes bothlightingusa.com/products/360-tubes-bo-tube192
-Cold Sparks bothlightingusa.com/products/cold-spark-fountains
DMX
-Sound Switch www.soundswitch.com/
-Sound Switch Control 1 amzn.to/3NAAobQ
-Pre-programmed for you Sound Switch File bothlightingusa.com/pages/ss-pre-programed-software
-Donner Wireless DMX amzn.to/3v0XqC0
-DMX Pro Transmitter bothlightingusa.com/products/dmx-transmitter-1
DJ Tools
-Vmoda Crossfade Headphones amzn.to/2Rp7Xze
-Anti Fatigue Foot mats amzn.to/32pQuKI
-Gravity Clips amzn.to/2zBckTe
-ProX collapsible table amzn.to/478YyRm
-Rock and Roller Cart amzn.to/2XazvOb
-Gaffers Tape amzn.to/2AVJyYc
-DJ Ear Plugs amzn.to/2CUjOgw
-Sound meter amzn.to/2CO0jdh
-Kill-a-Watt amzn.to/2pZMbVP
Speakers
-LD System Maui 44 G2 amzn.to/4aqTcnB
-LD System Maui 28 G3 amzn.to/3TAjFcs
-LD System ICOA 18s amzn.to/41vadc4
-Mackie Thump Go amzn.to/3TzjRIP
-RCF NLX 24A MK2 amzn.to/41AdSFx
-LD System Maui 5 Go amzn.to/2RmWr7h
Mixers (Have + Recommend)
-DBX DriveRack PA 2 amzn.to/2FbR9GM
-Pioneer DDJ SZ (Serato) amzn.to/2WGwd0B
-Pioneer DDJ SX3 (Serato) amzn.to/2MRhalj
-Pioneer DDJ SB3 (Serato) amzn.to/2Riw4PS
-Yamaha 12 channel Mixer amzn.to/2KU1ivJ
-Yamaha 6 channel Mixer amzn.to/2IRsEQe
Truss/Staging
-Pipe and Drape www.georgiaexpo.com/product/build-pipe-drape-kit/?ref=6#uprights
-Rockville Collapsible Totems amzn.to/2IKpFcp
-Global Truss amzn.to/2pUPFZD
-Global Truss Base Plate amzn.to/2CPKwKK
-Global Truss Top Plates amzn.to/2pVVndB
-4' by 4' Stage Risers made by ProXdirect
-Metal O-clamps amzn.to/2q57R2Z
-Safety Cables amzn.to/2NKkwl9
Stands
-Rockville Stands amzn.to/2X55TRf
-Speaker Stand Scrims amzn.to/2IQzuWn
Mics
-Audio Technica 3000 4th Gen Wireless amzn.to/2WSQqFH
-GTD Audio G-733 Wireless Mics amzn.to/2IKHqZh
-Audio-Technica ATR-1300 Mic amzn.to/2RldqXv
Cables
-Power Strip amzn.to/2AaEBjs
-Power (12 gauge Light up ends) amzn.to/2CNZYr1
-Multi outlet cable amzn.to/2RUrkQi
VIDEO GEAR
-Cannon G7x Mark ii amzn.to/2zzqZOE
-Cannon G7x Mark iii amzn.to/2XEwpQJ
-Joby GorillaPod amzn.to/3c3hHaR
-Super Tall TriPod amzn.to/2X6du1R
-Seagate 2tb Hardrive amzn.to/2tr6wTb
-Samsung T3 hardrive amzn.to/2tWVKpM
📬 For Business & Booking Inquiries Contact to me at
DJRickWebinfo@gmail.com

Пікірлер: 148

@DJRickWeb 3 ай бұрын

This is the setup I used in this video Audio Technica 3000 4th Gen Body Pack amzn.to/3PlwlRg Body Pack Converter Cables -1/4" Option www.nlfxpro.com/at-gch-guitar-input-cable-for-wireless/ - XLR Option (Prefer this now) www.nlfxpro.com/xlrch/ 1/2 Wave Antennas www.nlfxpro.com/1-2-wave-470t530/ AA wired power amzn.to/3VnVqie

@shawnclark9674 3 ай бұрын

Nice! Bought one today. Thanks man!

@thetoolman5380 3 ай бұрын

Rick is spot on here! YES!YES! scan as late as you can!! I have been using the Sennheiser G4 body packs for years. They rock! Pricey but you get what you pay for with that gear. Make sure any and all wireless other than your mics (etc) are on. Vendors/House gear included! Don't expect them to tell you what's running there. lol Then scan again if possible. Always try for the best line of site. Bodies absorb signal like a sponge. Signal will always be less once people are there. One wedding I got there super early and was fully setup everything running. Other venders started showing up. I noticed the videographer after he setup was using the same model Senn body packs I was and I could see his frequency on the main screen on the body pack. Nope, way too close to my freq, almost the exact same. My mic was on the groom. Has to work! I spoke to him and he scanned and saw his pack recommended a different bank than he was on at first. He changed banks. He thanked me and all's well! He had a digital recorder on the groom for post audio. I don't think he scanned when he setup. If we had stepped on each others freq that would of been bad. Don't depend on other vendors to rescan from their last gig! They will just use the last frequency that was locked in. With multiple G4 rec/transmitters you can create a wireless chain/bridge of outdoor speakers. One transmitter with multiple receivers for one. With in/outputs on powered speakers you can retransmit the signal on a different freg to keep going. lots of options. Test and enjoy :) Love the channel!

@j03franks 3 ай бұрын

Say you have dual mics on a shure slxd 24 or equivalent system. Is it best practice to have them both on the same frequency, or should they be different? I ask because i always use the group scan and it sets both channels to the same. Havent had any issues yet.

@doboyle1955 Ай бұрын

• Rick, what I am doing is mounting the wireless receivers up on a T-bar commonly used for DJ lights, etc. The ten foot height seems to be optimal and helps prevent a lot of drop signal situations as you can imagine.

@DJRickWeb Ай бұрын

I leave mine on the table and set the reciever boxes on the back the speakers had 0 issues 200ft away full strength

@Dranomoly 3 ай бұрын

Another great video. Thanks Rick

@gunnerjacksonevents 3 ай бұрын

Rick, thanks for this outstanding video, a BIG help!

@Pokarookris Ай бұрын

Glad KZfaq recommended this video. I was using the same Alto system last night. Kept cutting out. Not because of the distance. The power cable is not shielded properly. And any little breeze and made it swing one way or another would block the signal

@MrInternationalSound 3 ай бұрын

Perfect timing. And your info s was spot on. Gonna try this set up

@andrewbosma4857 3 ай бұрын

I already have a bunch of Shure SLXD, they just released a beltpack sized receiver and it’s amazing 🙌🙌

@PJ_Wlkr 3 ай бұрын

Rick for president 💯💪🏾

@DJIronMIc 3 ай бұрын

Nice really enjoyed your vid

@FormulaOneLeclerc 3 ай бұрын

Thanks for this!

@kellyaustin7487 3 ай бұрын

Been using Shure for our wireless speaker systems for years and never had a single drop out.

@djern 3 ай бұрын

This is great info!!! Maybe some ideas to play with. 1. Two mic transmitters on the mixer, one panned left and the other panned right, on the receiver you should be able to utilize each channel to make stereo audio. 2. A pad on the output of the mixer may be needed to prevent overdriving the wireless pack as most are looking for mic/instrument level and not line level.

@atlargegroupllc2694 3 ай бұрын

Mic frequencies in the 600 range up to 616 MHz can still be used in certain areas, I live in an area where you can use them and I have no problems with the one in my inventory, All my newer mics are in the 400 & 500Mhz frequency range. Great video, I am going to purchase one of these systems.

@jdubya54 21 күн бұрын

Man thanks for the video. I need to set up a PA system at a park and need to use wireless speakers. Hope i can hit you up if possible

@DayNNyteDJs 3 ай бұрын

I do this with a Sennheiser and it works great. Finding a good frequency is key, no matter what brand you are using. Ben Stowe is a genius at this. Thanks to Pioneer (ugh Alpha Theta), all this will soon be included with some speakers, making life sooooo much easier. I hope it becomes common on all brands/size speakers.

@JukeboxProductionsDJ 3 ай бұрын

If you want to use multiple receivers with the same lapel, you may have to adjust some settings. Some systems have a “pilot tone” as an extra verification between devices. If you don’t have the exact same model of devices, you may have to turn that off to make it work

@elliotchocano9374 3 ай бұрын

Love this idea! I do the same with my EW-DX and here is what I learned from my research For the best wireless audio you want a - true diversity system that can switch antennas to reduce dropouts - A transmitter that can handle line level input (because you're sending music not a microphone) EW-D EW-DX AT3000 QLX-D/SLX-D Now the only downside is the big receiver unit that will be on the speaker and a potentially battery powered transmitter There are a few systems with small receivers but they don't work as well Alto Stealth/pro has poor range IEM systems but they are not true diversity (potential drop outs) Shure PSM1000 would be the best system to use however it has an MSRP of $5,000. Now I've seen one cheaper system that might be able to do it but I haven't tried it yet because I had a bad experience with JTS in the past...However my mics weren't true diversity. If someone is willing to try and report back it is the JTS SPT-1R/SPT-1T System Let me know what you guys think!

@DJRickWeb 3 ай бұрын

Couldnt have broken down the nerdy tech specs better myself. Wasnt gonna do it in the video cus its like way over 80% of peoples heads! Thanks for the breakdown

@djresqvideomix 27 күн бұрын

Look up the specs of this IEM, its what I use and its flawless. Way better to have the transmitter as a half-rack and the receiver as a body pack hooked to a speaker imo. Sennheiser ew IEM G4 Twin set

@elliotchocano9374 27 күн бұрын

@@djresqvideomix this seems to be the unit everyone has had good luck with. Something I missed in my research was that the iem receiver uses "adaptive diversity" using the headphone cable as a 2nd antenna. I wonder if using the xlr cable in place allows the same functionality. I guess it's not true diversity but seems good enough for most djs. I'm hoping the update the iem line to digital like the ewd and then I'm going to get one

@djresqvideomix 26 күн бұрын

@@elliotchocano9374 totally agree. Lets meet again here when they do

@bravar14 3 ай бұрын

I was just trying to find a video on ways to do this!!!

@MusicOnStageStanmore 3 ай бұрын

Rick! I love this Hack! Cost effective and works so good!

@jasonlajuene2036 3 ай бұрын

dont be cheap in audio !

@wickedwaiata2939 3 ай бұрын

@@jasonlajuene2036 Coming from someone who buys behringer 😂😂😂😂😂😂😂😂😂😂

@jasonlajuene2036 3 ай бұрын

@@wickedwaiata2939 We have Midas and QSC gear... so there you go. next PA will be Danley Sound Labs

@maximumsplllc 3 ай бұрын

Great Video!! I don't know if you ever checked out the new versions of Alto Wireless system, but the MKII & Pro version is levels above the original one. You can scan for the perfect frequency now. So far I'm impressed with the performance, and I'm going to do a video in regards to it

@NRJLT 3 ай бұрын

you also can use in ear monitor sistems based on wireless words the same, you can mpove the body pack together with a speaker on aly place you want on batteries

@FenixEventProductions 3 ай бұрын

Use a wireless in ear system, Shure PSM1000or similar would work best. This allows you to keep the receiver at control with your other mics and mixer. Connect the beltpack to the input on the speaker and you're all done.

@deewizzard598 3 ай бұрын

I have used the Alto stealth in Hawaii when I do beach weddings 3 years now without a flaw!! for me if it ain't broke I ain't trying to fix it.

@robacejr 3 ай бұрын

Same here. I’ve done big corp events where we need Multiple rooms with the same audio and it works flawlessly..

@oldschooldjernie 3 ай бұрын

mine kept dropping out (I'm in L.A. ) i returned it

@DjGCue71 3 ай бұрын

my GTD Audio wireless mics sound nice and have never failed on me.

@DJAY-DUBZOFFICIAL 3 ай бұрын

If you had the Mackie Profxv3+ mixer you can bluetooth directly to the mixer so you don't even need that adapter. just the lapel and cable for the lapel

@ErnieDouglas 3 ай бұрын

You can also do this same thing with a guitar wireless without need of mic receiver to transmitter switching capabilities. The small guitar belt unit is already the transmitter that takes 1/4" mono inputs from a mixer or "1/8 mono in like a headphone out. In this case the bigger tabletop receiver goes at the remote speaker. You can now get great digital low latency long range guitar wireless for $300-$500 .

@soundtasticevents3602 3 ай бұрын

The best is in ear wireless mics i use shure psm 300 but any good quality dual or single system will work a treat you should try it rick you won't be disappointed

@alexvilfrant 3 ай бұрын

Squad. I'm going to try it also. I get the tip from dj mojoe that have been doing it too, but I didn't try it yet.

@lk0stov 3 ай бұрын

A friend of mine had to do this exact setup for a speaker at the other end of a venue. He used a sennheiser system. Speaking from experience, sennheiser is probably your best bet in Europe.

@19Jose91 3 ай бұрын

I had bad expriences with shure too 😂

@DjMilliano 3 ай бұрын

Nice

@MBrulla 3 ай бұрын

Sennheiser G3/G4 is my system of choice for this. Through concrete walls, metal grids, multiple rooms, tons of bodies...no sweat. Super compact, battery powered, and easy. For larger/more demanding applications a traditional diversity receiver is best, but I rarely need more than the packs. Something to be aware of is if you are plugging into a stereo out and you are only able to do mono you may run into issues. Pull from a mono source or, even better, just make sure that you are pushing mono out of your DJ software in the first place.

@elliotchocano9374 3 ай бұрын

Do you use the iem g4? Or the regular mic g4

@MBrulla 3 ай бұрын

@@elliotchocano9374 Mic. I tend to use the same speaker from the ceremony as a cocktail and wireless remote speaker, so merely swapping the packs around allows this in one seamless action. They're readily available used, too, and are cross compatible with each other as long as you get the same band.

@thetoolman5380 3 ай бұрын

Yes Sir! that's what I use too. I picked up the AC power pack that snaps in like a battery pack and allows the trans/receiver to run on AC power with the speaker if it's powered. Super nice!

@MBrulla 3 ай бұрын

@@thetoolman5380 The $150 one from NLFX? If they made one that could plug into the back of the Everse8 I might consider it, but rechargeable batteries are cheap.

@DJMaddScientist1 3 ай бұрын

Gud job👍

@GetYourDJNOW 3 ай бұрын

Gotta try this with my Phenyx Mic 🎤

@user-sj2zm2mw7t 2 ай бұрын

You can try also with iem system

@j03franks 3 ай бұрын

You can use shure 1/2 waves on that?? Oh man i was about to return my AT 3000 because of those puny antennas. thank you!!

@Earthcitizen4609 3 ай бұрын

told u this kid is a genious

@jasonlajuene2036 3 ай бұрын

LOL... some of us pros have been doing this for years now.

@Earthcitizen4609 3 ай бұрын

@@jasonlajuene2036 true that’s he said now entry level djs are barely finding out

@iamdjcertified2 3 ай бұрын

You should try the hollyland Lark Max

@MonzMunkyz 3 ай бұрын

Another great vid. I'm looking forward to visiting NC for Dreamville Fest in a few weeks time. Are you playing anywhere during that weekend? I'm flying over from New Zealand.

@MonzMunkyz 3 ай бұрын

Or any bars/clubs you'd recommend to check out.. ideally Rnb/Hiphop lol

@DJRickWeb 3 ай бұрын

No I have reduced my gigs to about 20 a year. But I am around doing the backend office work practically every day

@kertinaproduction5486 2 ай бұрын

I wonder how this compares to the Shure psm300

@shawnclark9674 3 ай бұрын

Rick, I do this setup as well. Could you post a link on this batter pack that plugs into an outlet giving unlimited power?

@DJRickWeb 3 ай бұрын

In description

@1Twisteddj 3 ай бұрын

Can you show how to setup multiple speakers with these?!! It would be super helpful

@DJRickWeb 3 ай бұрын

Have more reciver boxes and set to same freq thats it

@1Twisteddj 3 ай бұрын

Then from each box into each speaker?

@DJRickWeb 3 ай бұрын

@1Twisteddj yes!

@DJ_V_squared 3 ай бұрын

This works great but I'm wondering if just getting the SKAA transmitter and receiver would be a better option and also half the price of most wireless mic setups.

@markmclean8473 3 ай бұрын

I use the Skaa dani transmitter with the skaa A-link plus hydrid transmitter/receivers one in each speaker... low latency.....very quick setup and all rechargeable....have ammoon guitar dongles 5.8hz as backup and also backup cables. Not had any issues.... 1 year now

@donaldccannon1 3 ай бұрын

I stop saying to use skaa people thought I was a rep lol😂 being using it since 2020. When people see I’m using wireless they are always shocked Plus. Look how goofy and big that set up is

@DJ_V_squared 3 ай бұрын

@@donaldccannon1 I’ve seen it used by other djs and they swear by it. I wonder it’s not used by more of us or recommended by other djs.

@DJRickWeb 3 ай бұрын

SKAA is 2.4 ghz which is wifi. Wifi is not a reliable source of wireless transmitting as it is a super competitive space.

@dj_bonesitis 3 ай бұрын

Does anybody use the Xvive U3 wireless microphone transmitter? I bought one as a contingency for my LD handheld mic and to transmit XLR out off my mains to a side fill speaker. The Xvive operates in the gigahertz range (2.4 Ghz) and I haven't tested it in a room full of cell phones. I look for affordable options versus spending $900 on a wireless lapel system (Xvive is $200).

@johnburger6774 3 ай бұрын

WhT is the level you can put into a wireless mic transmitter? -10 / +4 as I guessing it's looking for a mic input not a line I put . Wouldn't want to push the input to hard and clip it. Thanks

@DJRickWeb 3 ай бұрын

My bodypack might be different then some but I can put 0 db into it and it registers 0db on the input.

@matthewwalker9715 25 күн бұрын

I am a rookie to wireless systems. Can you tell me the Lapel mic - model that you show in your videos? I do screen grabs but blurry. Appreciated. Thanks!!!!

@DJRickWeb 15 күн бұрын

Full list in description

@Clem_dow 3 ай бұрын

is there anyway to improve the latency typically found when using AAC?

@DJRickWeb 3 ай бұрын

Latency is similar to a wireless mic. Very minimal. We use this for side fills and other rooms and the delay is minimal very similar to what we need based on the distance. From the main speakers

@danielcox4757 3 ай бұрын

I have not had a problem with them.

@mm-2018 3 ай бұрын

Just buy alpha theta gear..lol..jk I always learn from your videos. Keep it up

@j03franks 3 ай бұрын

Can you run the body pack to the headphones out on the yamaha mg06? Would that work? I run my sub off of monitor port and tops from the main left/right outs

@DJRickWeb 3 ай бұрын

Yeah that would work

@j03franks 19 күн бұрын

@@DJRickWebcouldnt you also use the body pack at the speaker instead of receiver? Thinking it doesnt matter as long as you have 1 part connected to mixer, the other to the speaker.

@DJRickWeb 18 күн бұрын

No the body pack is a transmitter and the reciver box is a recivers the signal goes one way

@j03franks 17 күн бұрын

Man I got it all working. Thank you rick daddy

@djamaraLA 2 ай бұрын

do you notice a difference in sound quality using this setup vs doing traditional wired XLR?

@DJRickWeb Ай бұрын

Slightly when the distance gets very long. Mainly in the bass quality

@KrisSzanto 3 ай бұрын

Why not just use an in ear monitor set up so that the small pack is at the speaker?

@DJRickWeb 3 ай бұрын

IEM systems only use one antenna. By doing this we have true diversity with an A and B antenna on the reciever increasing reliability over distance. Also in the case of my mics I can setup a backup freq as well that if I were to run into issues i simply click a button on the bodypack and bang we are switched over to a backup frequency.

@KrisSzanto 3 ай бұрын

@DJRickWeb Thanks Rick. I use the same mic, but never thought of reversing it with a body pack. GREAT INFO. 👍

@brinstondsouza4774 3 ай бұрын

Yo buddy Which is the bluetooth device used in the video

@DJRickWeb 3 ай бұрын

amzn.to/43wPwxr

@Dylanvh 3 ай бұрын

If you would get those Directional antennas you can probably go even further

@thetoolman5380 3 ай бұрын

The Shure Shark fin :) cool looking

@Dylanvh 3 ай бұрын

@@thetoolman5380 Yeah, I love the look of those too

@djcalvin681 3 ай бұрын

❤😊

@b.powell3480 3 ай бұрын

However, you still have to have batteries to power up the amps in the speakers!!! Also, where can you get a wireless transmitter powerful enough to send a signal through a large venue that has trees and buildings!!??

@DJRickWeb 3 ай бұрын

This was just an example. Typically we run hard power to everything. We use this to run audio throughout venues. If you need to go further you can chain this system. So at 300ft take the output for the reciever and put that into another transmitter to then push the signal further

@b.powell3480 3 ай бұрын

@@DJRickWeb Thanks for sharing this information, will give that a try

@Felix1ct 3 ай бұрын

What little bluetooth box are you using?

@DJRickWeb 3 ай бұрын

Random one we got last minute on amazon for a corporate gig that need a bluetooth input lol

@DjRedeem 3 ай бұрын

Yo Rick do u all have Wireless Mics for Djing where I could plug into mic input and the headset would have a Mic on one side coming over to yo mouth if u know what I’m saying?

@DJRickWeb 3 ай бұрын

Headset mics. Yes any bodypack you can plug on into it

@georgegonzalez1204 3 ай бұрын

What about the alpha theta speakers?

@DJRickWeb 3 ай бұрын

They work. Not this far though

@mattlankford1597 5 күн бұрын

Have you tried SKAA wireless??

@DJRickWeb 5 күн бұрын

Terrible

@superdad8274 28 күн бұрын

So the body pack transmits sound from bluetooth? I don’t understand how this works. Thank you

@DJRickWeb 15 күн бұрын

No I was bluetoothing to the yamaha mixer. Because no device has a 3.5 mm anymore. The wireless mic was doing the transmitting and receiving

@superdad8274 15 күн бұрын

@@DJRickWeb got it. Where was music coming from? You mentioned bluetooth? What device did you use for that? Thank you

@DJRickWeb 14 күн бұрын

Little amazon bluetooth audio receiver.

@hussince 28 күн бұрын

@djrickwebb Would an IEM system work as well for this application?

@DJRickWeb 15 күн бұрын

Not as good but will work to a degree

@hussince 15 күн бұрын

Thank you! I don’t do nearly the amount of gigs as you do, but look forward to your review as it can help out!

@chuyy96 3 ай бұрын

wont it be better to use a wireless in ear set up instead?

@DJRickWeb 3 ай бұрын

Nope. True uhf diversity is the best form of signal out there

@jasonlajuene2036 3 ай бұрын

Use IEM Trans out to Linear amp to 1000 MW and get a SOLID no drop signal. $$$$$$$$$

@tjsongman 3 ай бұрын

#Squad

@nephentertainmentllc3394 Ай бұрын

#squad

@TrashPanda-kr2me 3 ай бұрын

Audio-Technica make wireless IEM systems that you can sync together so the lapel transmitter will be replaced with an IEM transmitter so you can get a more powerful signal to your receiver so yea. Do what you want with this information ok I am not responsible for anything you are doing this at your own risk. I had to say that just to cover my but :)

@DJRickWeb 3 ай бұрын

The iem systems are more convenient but they actually are less reliable than using the setup I showed. The is because iem is not a true diversity with dual antennas.

@usmanoladeinde6604 3 ай бұрын

SQUAD

@bboymac84 3 ай бұрын

SKAA is faster and more reliable because it’s on its own frequency. Streetheart and Dani. Plug in and play! More Simple than this long winded video. Plus those label batteries run out fast.

@donaldccannon1 3 ай бұрын

Hey. Noticed I stop saying to use skaa. People gonna start thinking your a rep lol😂

@user-xv2wh1bd2l 3 ай бұрын

I second SKAA.

@DJRickWeb 3 ай бұрын

SKAA operates on 2.4 ghz which in the pro industry is the most unreliable frequency range. Its such a competitive freq chunk that it is very unreliable. This method I show is what everyone in the touring or corprate AV space is doing. And see link to the AA battery plug in wall adapter that you use to not need batteries.

@bboymac84 3 ай бұрын

@donaldccannon1 I don’t mind being an unofficial representative. Their stuff works and works fast and easy!

@gordondavid101 3 ай бұрын

I may be wrong, but I don’t think you can have more than 1 receiver.

@DJRickWeb 3 ай бұрын

You can. The transmitter doesnt like lock into a reciever. It sends a signal out to whatever is listening and any reciever on the same freq picks up the signal.

@MBrulla 3 ай бұрын

I just ran an event last weekend with 6 receivers running off of one transmitter. Yes, you absolutely can. It's merely broadcasting a signal on that frequency. Any device tuned to that frequency may receive it.

@TkoBallerx 3 ай бұрын

Got dam bro what event were you doing that you needed 6 receievers lol?

@DJRickWeb 2 ай бұрын

Events. I have already done multiple with 6. Full room has 2. Than 2 more in side rooms or entry ways to have complete audio threwout

@MBrulla 2 ай бұрын

@@DJRickWeb Yup. Mine was a throw in the main room, side room, back room, VIP room, dining room, and bar. Pretty widespread, but Senny's didn't even blink (packs only)...even through a concrete wall.

@Richard1977 3 ай бұрын

Dude never heard of IEM systems. Way easier and smaller receiver.

@DJRickWeb 3 ай бұрын

IEM is not a true diversity system. Its only one antenna vs 2 on these systems. The Alto stealth is a IEM and it doesnt do nesr the range or reliability of a true diversity system. You can setup backup freq to swap to or some mics auto switch between them with the two antennas to maintain perfect signal.

@Richard1977 3 ай бұрын

@DJRickWeb That can be BUT your transmitter is a one antenna-deal. My experience is that on those distances diversity does not make a difference. Your 1/2 wave antennas make the difference. If you go IEM, you can hook the transmitter up to a directional antenna and "beam" your signal across. You will get the same distance or more but stereo and easier to hook up with less hassle when in comes to in/output impedance and levels. And no disrespect intended with my "Dude" comment.

@doboyle1955 Ай бұрын

• Excellent, DJ Rick Webb, thank you for this and for all of your videos. What about getting sound outdoors to all four sides of the building? This is DJ Dennis James "The VOICE" O'Boyle out here in Wisconsin. > I've been looking for a solution to a complicated audio challenge, getting sound around a 300' x 150' building at an annual classic car show. Rather than running miles of cable with all of those headaches, your wireless solution seems viable for our event here in August each year. > I will try it out ! Thanks again. • At this other show, they have me working at the edge of a barn door: kzfaq.info/get/bejne/l7eFqM-i0da4eXk.html

@DJRickWeb Ай бұрын

Use this setup like a repeater. So hook up another body pack transmitter at the end and repeat. Use different freq for each leg around the building to avoid conflicting channels.

@doboyle1955 Ай бұрын

@@DJRickWeb GREAT! Thank you, DJ Rick Webb. If you ever get to set up all four sides of a building like you described, please add it as ano0ther of your excellent videos.