This looks a lot like the flexcables fitted in Canon DSLR objectives for the aperture. Moving parts connected with flexcables in steep angles makes for breakage. Awsome to watch you work as always and follow you along as you explain what your are doing is a real blast. Top notch!
@mitchyk3 жыл бұрын
I'm one of those people who can't help take things apart to see how they're put together/work. At least with my drone I don't have to now! Thanks Graham!
@lostinspace20093 жыл бұрын
Belts and Braces for sure..makes computers a piece of cake in comparison..good job my dude !!
@MrSkronix3 жыл бұрын
Hi, it seems that you forget to connect GPS cable that is located at very back side of the top cover. Very easy to overlook and to break while openning. It needs to be detached and attached with the long straight tweezers. So, unscrew only rear 4 screws from top cover and lift it up for about 1cm and you'll see cable with white inline connector. Hope that helps...
@reggiebusaing75353 жыл бұрын
Hope you added silicone glue back on the connectors, they were placed to prevent them from unintended disconnections from vibration during flight.
@MsShariff13 жыл бұрын
I like your (From BANGLADESH) video's your computer troubleshooting or any kind of tech work is very precise & you take enough time to diagnose problem's from it's root then obviously good solution comes up. keep up the good work !
@moayadmyro20913 жыл бұрын
I like the moment when you got nervous of tiny stuff but I really enjoy this video thank you Garam
@mancavehobbies62133 жыл бұрын
Awesome didn't know you fixed drones
@deminybs3 жыл бұрын
awesome I didn't know you watched 30 min videos 10 seconds after being published
@mancavehobbies62133 жыл бұрын
@@deminybs Ever thought comment first then watch the video.
@deminybs3 жыл бұрын
@@mancavehobbies6213 yeah, but then you'll just have to go back and edit the comment if you wanna say anything else after watching ....since how could you know the content without watching?? other than a general "great video" comment but nah just effin with you lol, I think we've all done it 😋
@ssabykoops3 жыл бұрын
@@deminybs First !!!!!,, uh? shit wait ,, 😋
@deminybs3 жыл бұрын
@@ssabykoops almost!! Ha
@dash8brj2 жыл бұрын
Glad I never had to do a flex in my mavic, but a serious crash resulted in a motor arm needing replacment! that top cover is a pain to get off :)
@DeltaCmndrElite3 жыл бұрын
ive done a few of those! very fiddly but gets easier the more you do, i found its best to pre fold the flex ribbon. made a good bit of money fixing crashed drones bought off ebay
@Xinrainu3 жыл бұрын
Thanks! Now i can fix my own drone if something like this happens in the future. Got the same drone still working fine after having it for 5 years now. :D
@paulgarrett93223 жыл бұрын
Great video thank you for all your hard work.
@ashleynery80923 жыл бұрын
you didnt replace the belt and braces of selastic or equivalent ? to save you stripping it down again if a connector comes out when it falls from grace.
@keithmatthews16733 жыл бұрын
I no longer have 20/20 vision after three rounds with the eye surgeon and the background on your desk makes your videos difficult to watch, this one especially as the background colours are similar to the drone. Nice work as usual!
@demonkey123 Жыл бұрын
I’ve just bought the parts to do the same job. Confidence is diminishing after watching your vid 😬 Thanks for posting though, invaluable info for me to at least make an attempt! 👍😁
@wynard3 жыл бұрын
I wonder if those connectors will stay in place without the glue.
@Querenciatv3 жыл бұрын
Awesome Work 👍
@TECHHUBfixitup3 жыл бұрын
I think you should hot glued that new flex cable with connectors,it will come off anytime as drones do lots of vibration.
@Adamant_IT3 жыл бұрын
I considered it, but the funny thing is that the flexes that connect the camera assembly to the mobo aren't secured, and they'll be taking all the vibration. Yet the flexes inside the camera that _were_ secured are on the gimbal that is all anti-vibration mounted.
@twebit3 жыл бұрын
Good job!!!
@liaminwales3 жыл бұрын
Cables like that give me the fear of god, broken a few more than id like. Hope one day they make a more simple to fix design for a breakable part.
@grumpybear623 жыл бұрын
Just waiting for that moment when you notice the video cable was not put back under the shroud 25:43 ish
@ACOnetwork3 жыл бұрын
It is interesting, how are stuff puted together 😁. Some are worse and some easyer to work with.
@kong25123 жыл бұрын
without glue on cables the connector get loose in while after couple flights. Customer will come back to you. As you should put at least hot glue to seal it some what was from factory
@johnyoung67713 жыл бұрын
What microscope would you recommend Graham ? One that's not too expensive but not a total piece of s--t either?
@Nrgodzilla3 жыл бұрын
Lets fix drones added.
@HuntersMoon783 жыл бұрын
My mate built me a racing drone, it's damn quick
@kvn8643 жыл бұрын
solastic goop he says
@skydonkey2453 жыл бұрын
OUCH ! You should only ever use the lens guard while in transport it should never be attached when the unit is powered up.
@nsknyc3 жыл бұрын
Love these vids, please keep them coming. Does anyone know of a brand of silastic that can be used replace the one taken off this? They're usually acid free, and a bit gummier than hotglue.
@alexandrafreeman81353 жыл бұрын
My mavic pro ad the same repair. Or an entire new camera module aparently
@deminybs3 жыл бұрын
awww you didn't get video of the customer trying it out??? nicely done , looked tedious.....my favorite 😂
@ComputerTechNL3 жыл бұрын
Nice fix next time putt some silicone clue back connectors will vibrate off and you need to do the job agian.
@KrissBartlett3 жыл бұрын
wow your amazing that was fiddly
@gregalss3 жыл бұрын
how dose it go ee-erer 25:55
@MartinRepairs3 жыл бұрын
What? Dint glue in the connectors? You are asking for trouble... Matter of time when the costumer comes back...
@GiovanniPreda3 жыл бұрын
Why not use plastic pry tool instead of metal one?
@ApostleOfZeus7 ай бұрын
Agreed, he was creating some real cosmetic damage to the seams, that would put off a potential buyer in the future.
@weerobot3 жыл бұрын
Wow He fixing something...lol
@chrisverhulst54763 жыл бұрын
You must have nerves off steal.
@rasmussen753 жыл бұрын
you are too cool, is there anything you can not do ??
@Adamant_IT3 жыл бұрын
A lot! But having a go is the first step toward learning something new!
@001snapshot3 жыл бұрын
Really...duck tape and solder?!...hmm..you"ve never seen mine...lol...where there is solder..and electrical tape...i can run mine into a hard object...and still fly again..tho i try not too.
@tubsucks2 жыл бұрын
you took the most intricate part of the replacement and sped it up...... you sped it up? really ?
@TheOneTonHammer3 жыл бұрын
Let's fix NOT computers. How about "let's fix electronics"?