DJI O3 Air Unit Is it worth it? | Full installation and test flights on an iFlite iH2

Рет қаралды 22,021

andy kirby

Жыл бұрын

I test the new DJI O3 Air Unit on one of my favourite micro quadcopters! How does is stack up against the competition?!

Пікірлер: 81

@dredfxcustompaint Жыл бұрын

Great video Andy and always cool with your tunes rolling

@Eroc556 Жыл бұрын

My air unit was shipped yesterday Im excited man ty for video

@McLogo76 Жыл бұрын

The image quality is truly amazing. I think the 03 unit would be fantastic on something like a sub 250g AOS 3.5 or similar frame that has very low resonance. Nice video 👍

@creationlabsinc.189 Жыл бұрын

I’m installing it on my 5” aos v2

@justainchoe6141 Жыл бұрын

@@creationlabsinc.189 I’m installing on my 40mm Tinyhawk 3

@adamkurpiewski8885 Жыл бұрын

I’m planning on building a 6s AOS 3.5 with a 03 Unit.

@panosfpv Жыл бұрын

Nice and simple! 👍

@1975supermike Жыл бұрын

On the goggles dji said after you adjust them the turn bits push into to lock your adjustments in place so you don't knock them in a bag.

@wrxs1781 Жыл бұрын

Good video Andy, the video quality was good, the late day lighting was not the best for a demo though.

@Tonkabollocks Жыл бұрын

Norfolkian ('pom') on the Barrier Reef! Know how viscious the winter Sun can be there, never leaving the car windows, from morning to night! The slight 'jello' did not surprise me but I was surprised by what must be 'lens flare', moving accros the glass like a 'bog demon' EVEN when the Sun was nowhere in the FOV! Can not say I have noticed it on any of the footage from numerous Insta360 (Twin Cam) videos, whats your experience (Insta360) in that paddock at a similar time, on a winter's day?

@deice3 Жыл бұрын

12:45 have you locked the adjustments? Push the knobs in and rotate to lock them.

@jojo42069 Жыл бұрын

I think a few factors contributed to you having jello. First of all the low sun creating challenging lighting condition with high contrast. Not using a ND Filter causing the shutter to be fairly high resonating with the vibrations of the drone and of course the mechanical part with low diameter (probably out of balance) props spinning at high RPM creating high freq noise. I'd start with putting fresh props on and maybe if possible higher the PWM Frequency in BLHeli32Suite. After that get an ND Filter to lower the shutter speed

@andykirby Жыл бұрын

Useful info thanks 👌🏼

@craigsaunders3532 Жыл бұрын

@@andykirby Camera and unit MUST to be soft mounted. More so the camera

@RCCRAZYSTUPID Жыл бұрын

AU needs vibration dampening between frame & AU says the instructions I believe

@IggyBiggy Жыл бұрын

love a good 3 inch hd fpv drone

@Dave64track Жыл бұрын

Looks like a really decent piece of kit the video footage was really good.

@jibi9275 Жыл бұрын

All i see is parts of the frame in the FOV, can't wait thé O3 frame

@leongcheemeng6080 Жыл бұрын

So Nice Wonderful ❤❤❤

@woody1766 Жыл бұрын

file the two sides down on that cam mount if you keeping it like that.

@EnglishTurbines Жыл бұрын

I'm assuming it's recording the OSD overlay on the Goggle DVR?? But not the onboard DVR? Can I pop round and try on your Walksnail Goggles to see if my old eyes will focus etc?...?...lol..😏😏😀🇬🇧

@rodher12 11 ай бұрын

I assume you have the wtf.osd since the OSD shows the battery status as betaflight does. Did you need to do the root procedure again after updating? Thnx in adv

@Nico-dj3gu Жыл бұрын

Could you please make a tutorial, on how to set up betaflight with the tango 2, to be able to change settings in the O3 and start/stop the recording? Would be much appreciated! Thanks in advance!

@andykirby Жыл бұрын

I'll see what I can do!

@MrMikeydrum Жыл бұрын

I think the o3 system is great but frames need to be designed with it in mind just throwing it into normal frames and using it for recording has to many limitations with current frame design

@luismardones5521 Жыл бұрын

Thanks Andy for sharing this video. I bought a DIY O3 and I had problems when trying binding it to my Googles V2 after updating them both to the latest firmware. As I saw in your video I had to connec the AU to the FC before trying binding it to the goggles.

@andykirby Жыл бұрын

Hi, I dont think its essential but it does need a power supply to bind, so you might as well just connect it all up before trying to bind.

@randysem7848 Жыл бұрын

How bad is the vibration? Also no props in view from what i can see?

@flyinfilm90 10 ай бұрын

The future is here!

@robgroove Жыл бұрын

the gyro is in the cam. just need to soft mount it.

@matthewbeechey3883 Жыл бұрын

Is that on the river between Ware and Hertford ?

@zephdeasey587 Жыл бұрын

If you push the knobs in and twist they'll lock into place so little bumps don't ruin the adjustment

@andykirby Жыл бұрын

Ahah!

@zephdeasey587 Жыл бұрын

@@andykirby cheers! Happy flying

@neilfpv Жыл бұрын

What are those black side bars on the side showing up randomly? Is the O3 camera loose? Or was it because of stabilization software? For the vibrations, check for loose screws, loose props, bent props, loose motor bells, vertical bell movement or PID maybe under tuned. O3 is sharp.

@seb-depp Жыл бұрын

It's the frame. They are more pronounced when he switches to the view of the goggles but they're there as well when showing the recording from the O3 itself.

@andykirby Жыл бұрын

Yeah for the test there were two options, mount on the original mounts and be too far back that the frame is in view mostly in the googles view... or mount on the carbon frame with worse damping and with the camera far forward, sticking out with no protection. I went for the safer option. At least this video highlights one downside of this system, that the camera is an awkward size and won't fit or work well in some frames, but hey ho this will inspire the frame designers to make new designs. Looking forward to the developments.

@Sohail187 Жыл бұрын

you got a link to that frame you used mate?

@benleong2008 Жыл бұрын

how do you record with the o3 air unit? i insert sd card to both DJI O3 air unit and DJI goggles 2, but the O3 air unit did not record anything.

@ChrisParayno Жыл бұрын

Love that you have no props in view. What is this frame?

@k1ortia Жыл бұрын

Walksnail and HD Zero for the win..😉

@andykirby Жыл бұрын

I'll have to try my walksnail system again, been a while.

@outboxfpv4360 Жыл бұрын

Hi nice build. Doest 03 heat up too much. Will it melt the TPU customs mounts?

@andykirby Жыл бұрын

Thanks, no I havent had any issues where it heats up enough to melt anything, they do run hot but with a good airflow over the unit it stays cool in flight. Make sure low power mode is enabled until arming the motors. The camera itself does not get hot at all.

@outboxfpv4360 Жыл бұрын

@@andykirby Thanks buddy

@aleksanderpawelczyk5221 Жыл бұрын

thanks

@urbexandmystery Жыл бұрын

jello or vibrate??? on video dvr or record 4k

@endyX286 9 ай бұрын

is the dji 03 air unit works with betaflight F3?

@msulkey Жыл бұрын

Since your using crossfire, how did you turn off the DJI control transmitter link?

@ZkReAr-fs5do Жыл бұрын

Aye bro, I am thinking on getting a crossfire on my drone with a tango 2 and using o3 with goggles 2. Just in case I lose video on my goggles 2. Do you think it's better to have a crossfire ? Or just stick with o3 air unit and dji controller and goggles ??? It's going to be my first drone thankss :)

@BB-35 Жыл бұрын

Too much jello in onboard recording I think. Is there any stabilization ?

@Bengy22 Жыл бұрын

I personally don't really see a huge upgrade from the caddx vista vs this new unit. BUT I would really like the recording on camera system and not at the goggles, that's a game breaker for me so its easily worth the extra cost (roughly $90 usd for me)

@JohnIn2SonAZ Жыл бұрын

There is a huge difference, In many ways. But you need the OLED Goggle to see it FPV Wise. It's as much of an improvement as old analog was compared to the first DJI HD System.

@dangerous8333 Жыл бұрын

@@JohnIn2SonAZ No it's not.

@rugioh6826 Жыл бұрын

What flight controller do you recommend?

@rugioh6826 Жыл бұрын

I would appreciate it, I ordered the unit and will be getting it soon

@DukdikzZ Жыл бұрын

WOW your hobbies are amazing both amateur radio and fpv drone my call sign is E24PNG

@thomasadkins5009 Жыл бұрын

is there any way to bind the old dji fpv controller to the new 03 air unit or do i need to get a different controller and such

@andykirby Жыл бұрын

Yeah I think it only works with the FPV controller V2 (the one that came with the dji fpv drone and the avata) I'd get a TBS tango 2 if I didn't have a suitable controller.

@thomasadkins5009 Жыл бұрын

@@andykirby just called support today and by the sound of it they are not allowing compatibility which is kind of dumb so from now on i am buying the least amount of dji gear possible. im selling my old controller now and buying a tx16s and a elrs receiver. Thanks for the quick response to confirm. also the only reason i didn't want the tango 2 is i just like the bigger size of the controller lol. And more people have the tx16 so i'm assuming there will be more help available on youtube.

@orozcocris93 20 күн бұрын

What is the drone you put the o3 into?

@andykirby 20 күн бұрын

iFlight IH2 👍🏻😁

@danieledm0101 Жыл бұрын

Had that frame and it never flew good, many vibration and small isolations. I would suggest to change it for something newer in the market

@ZkReAr-fs5do Жыл бұрын

Quick question if I use o3 air unit with googles 2 and controller 2 and lose video conection. Will the RC lose conection aswell? And what will the drone do ? :( I am thinking about getting a drone and going full dji lol but I don't know if I should get a crossfire in my drone and just using o3 with googles 2 just to be safe in case of losing conection

@GooseDanny Жыл бұрын

Skipped soldering. I know, but I was expecting it.

@andykirby Жыл бұрын

Yes, mainly because this was fitted to a drone which already had a Caddx vista so the install didn't require soldering on the flight controller. All that was needed was to splice the wires.