best tutorial I have found on the internet. My specific issue was replacing the flex cable on my phantom 3 standard. Watched tons of different videos of novices attempting to provide a how-to for this task and all fell short, except for Tony. Excellent work, keep it up.

This vídeo saved my life!! Really well done.. Very clear every step u made.... THANK YOU VERY MUCH..!

Fantastic method of dealing with the Camera part of the gimbal. My P3S fell from 200' and sheared the gimbal off. After watching many videos on replacing the ribbon cable, only your video was concise enough and had some very helpful tips on how to deal with the camera. Gotta wonder who designed the damn thing in the first place. Below are some tips.

спасибо, ваши уроки помогли при ремонте подвеса! thank you, your channel help me repair my gimbal!

This is an unsolicited testimonial for Tony and his repair service-crashed my copter resulting in a separated camera. I contacted him, sent him pics of my broken camera and gimbal. He sent me the right parts immediately, with the instructions and a video...in a couple hours, I was flying my drone and taking beautiful videos and pictures again. Had I sent the unit off, it would have been a minimum of 3 weeks and who knows how much money...Thank you Tony.

Thanks a lot. My P3S now flies with or because of you video.

Saved me hundreds of dollars. Thanks Tony!

Tony has fixed my Phantom 3 Standard 3 times I believe. Small mishaps, one time I dropped the bird when taking it out of the van about waist to knee high and camera broke off. ouch and dropped the transmitter in the same move and broke the antenna off of it. Ouch 2 The funny part is its taken a drop from 25 or 30 feet to asphalt and the camera didn't break off. One other time I was doing the big dummy to see how long the battery would last with the bird up and down at about 2 to 3 feet and yes it took a sudden dive to the asphalt when the battery said I am completely dead no slow down warning. The camera didn't break off. Tony is a great communicator unless he is at his day gig (Musician Talk) then let him do his shift. Tony appreciate you helping me stay airborne I was almost ready to quit and hand Clients grounded video.

Tony - Thanks so much for taking the time and energy to put this video together. It helped me tremendously in putting my drone back together after a bad crash which snapped the camera off the Yaw arm and broke the ribbon cable of the gimbal motor. I have it all back together but now I am getting the yellow/red flashing lights with a calibration error. After several attempts, I still can't get it to calibrate. Tried the IMO and waving the small magnet around the compass as well with no results. Could this be a reassembly issue? The gimbal is controlled by the remote and is transmitting signal. It does seem twitchy when calibrating it.

Thanks for your videos. Very helpful with my repairs. However just to let ya know my Volume is all the way up and I barely can hear it. Yikes just bought one of those cheap ribbon cables on eBay for 15.99. Hopefully they have improved in the last year.

Awesome video , but just wondering if you can still get that bearing that goes under gimbal base cover plate and attaches to the yaw arm

Hey Tony, Great video, I busted up my gimbal pretty good. It would not let me update firmware etc with the ribbon cable and a roll board broken. I now purchased a ribbon cable and connected it to main gimbal board and the camera head, still nothing. Do all boards need to be attached to update firmware? My bird will not fly. Yellow flashing lights.

Great video, thanks you. I've looked and looked and can't find the screw reference sheet. Do you have one for the phantom 3 standard that you wouldn't mind sharing?

Hi, Im having an issue with my p3 standard with a frequent "compass error" any real solution to apply? Txs

Tony how do I send you a pic of my Drone have a separated camera already replaced the ribbon cable but the camera wont stay on

by any chance do you know where i can get the piece in the top left hand corner?

Will this fix gimbal pitch and roll error

Tony, I’m having an issue with my camera / gimbal’s horizontal/vertical alignment. This happened after a crash where nothing was broken but took it out of align,ent. Any help you can provide would be greatly appreciated. Thank you.

Where did you get your flex cable sir?

Hello, where did you get the alignment tool for the correct mounting of roll motor to the bracket?