72v DC to DC 12V Converter Electric E Bike DIY light wiring tips and tricks

No video

72v DC to DC 12V Converter Electric E Bike DIY light wiring tips and tricks

Рет қаралды 5,659

Жыл бұрын

In this video I am wiring in a dc-dc converter to convert my 72v battery to 12v dc for a lighting circuit. I wire it thru the light switch so it turns on and off with my key. The converter I used is no longer for sale. but there are plenty on amazon, I listed one below that has great reviews.
Feeling generous? Buy me a coffee to help support my videos.
www.buymeacoff...
Here are some of the products I used. If you use my links it helps me.
72VDC-12VDC mine is no longer for sale - amzn.to/3QkaPxG
Alligator test leads - amzn.to/45t1nfZ
Indicator test light - amzn.to/45b2GA0
Shrink Tubing kit - amzn.to/3Okm8mO
Shrink Tubing Heat Gun - amzn.to/3qcdY86
Terminal Crimper - amzn.to/3ODErF7
Thanks for watching and check out the Derbi Build playlist.
• Derbi RM85 Dirt Ped St...
#QS138 #VOTOL #cornped #ebike
My Gear Links
Main Camera amzn.to/3qw1Cnt
Main Lens amzn.to/3qsSOPf
Wide Lens amzn.to/3pwmOdQ
Portrait lens amzn.to/32ooNbv
Mic amzn.to/3HgkBch
Light amzn.to/3qw2SXJ
360 Camera amzn.to/3euCkjV
Selfie stick amzn.to/3pxJGJK

Пікірлер: 35

@iain1970 11 ай бұрын

Great work, been lurking on M.A. and keeping up with progress on there.

@Corn-ped 11 ай бұрын

Thanks!

@michalchilczuk7043 Жыл бұрын

Dziękujemy.

@Corn-ped Жыл бұрын

Thank you do much! Have a great day!

@branson.cz1 10 ай бұрын

would i be safe wiring a key switch/ on off switch inbetween the battery and the converter power?

@Corn-ped 10 ай бұрын

Yeah totally

@robmcculley6835 10 ай бұрын

I found that the 10A version of the step down was not able to drive my dual Hella horns. They have a much more capable 30A version that works better. The draw on the battery from the 30A step down only uses current when in use.

@Corn-ped 10 ай бұрын

Oof that's a lot. I'd get a different style horn if it was me

@davecarter34 2 ай бұрын

In the beginning stages of klx250sm conversion to EV, Australian regulations state that if main battery is depleted, vehicle lights must still have source of power, its a car rule that carries over to bikes. I was going to use one of these to charge the 12v lithium battery currently in the gas engine oem bike, im concerned about backfeed, running 12v into the output of this unit shows 12v approx on input. Any thoughts Zenner diode maybe ?

@Corn-ped 2 ай бұрын

ahhhhh, So thats why my KTM is wired like that. Its super annoying. I would just not do it. Do you need to get the bike inspected? I would avoid having 2 batteries if you can. more crap to go wrong.

@raczyk 5 ай бұрын

@ 2:44 you mention the red batter positive is always hot, and you want a switched hot. 1. What's the reason for that? Is it to prevent the dc-dc converter to not draw power when bike is not in use? I'd assumet he drain would be very low anyway? 2. Do the hot red leads goiong to the dc-dc converter need a fuse?

@edgurash834 5 ай бұрын

Is it required to mount these to the frame, or is it not necessary? Also, the one I'm looking at has a negative input and a negative output. Can the thd negative wires just be tired together with the negative wire coming from the battery?

@davecarter34 Ай бұрын

I also have a 3 wire 72v to 12v dc converter, do you think i have any issues with common ground, as on the 12v side i have a 12v lithium battery as required by the rules as per below, does anyone know if the 4 wire versions on amazon are common ground ?

@raczyk Ай бұрын

I have a 20 amp, 12 V. DC to DC step down. My horns are only require about six amps. Are the 6 amp horns safe to connect to a 20 amp twelve volt source? Do the horns only draw as many amps as they need from the converter?

@Corn-ped Ай бұрын

Yes that is safe. They will only draw 6a.

@raczyk Ай бұрын

Is it good to use a fuse on the high voltage input to the DC onverter for safety?

@Corn-ped Ай бұрын

Yeah totally. Figure out your draw and size it by 1.25%

@raczyk Ай бұрын

@@Corn-ped But if I have a load of 6 amps at 12 volts on the load side. Would the amperage draw on the 48 volt feeder of the DC-DC-converter side not be different?

@Corn-ped Ай бұрын

@@raczyk just put a 10a fuse on the load side.

@Corn-ped Ай бұрын

Yeah it would be 1.5 amps at 48v. But I don't think you can get a 2a fuse. So I would run a 10a fuse on the 12v side.

@raczyk Ай бұрын

@Corn-ped I see. Just to understand the fuse on the 12 Volt side protects the connected accessories against current surges/shots. But on the 48v feeder side a fuse would protect the DC-DC converter or the 48v battery source?

@RideWithAnthony 9 ай бұрын

Why can’t the DCDC be patch directly to the battery?

@Corn-ped 9 ай бұрын

It totally can. Would just need a different adapter

@user-xb8hl6xv4d Жыл бұрын

Hey how's it going, I have 3000w qs138 70h v3, will a em150sp along with a 200-240 amp continuous current battery get me 50 miles an hour? My front sprocket is 14T and my rear sprocket is somewhere between 42-49T. What controller do you recommend for such speeds? The frame I am using is a 2016 Tao Tao 125cc Db17. Thanks!

@Corn-ped Жыл бұрын

yeah I think the 150 would get you there no problem. I am getting to about 60 with the EM200 and a 72v 250A battery.

@user-xb8hl6xv4d Жыл бұрын

@@Corn-ped thanks for the reply! What battery do you recommend to get to this speed on a budget? Do I just need something able to run 150amps continuously? Also do you plan on doing a video on how to tune your controller? It would be really helpful! You probably one of the best KZfaqrs who actually cares about his fans! Most people don’t even reply!

@Corn-ped Жыл бұрын

Yeah man. I m working on a programming video. But I want to understand everything first. I feel like I get most of it. But somethings are weird. Hit up Allen at Amorge. They made great batteries for affordable prices.

@michalchilczuk7043 Жыл бұрын

Hi i have votol em150 motor qs138 90h and i try sort out programing controller only when i driving and paset 60amp cintroler cut off power then i restest it and i can start drive im no sure what i doing wrong thanks Michael

@Corn-ped Жыл бұрын

hmmm, I dont know of a setting that would do that. How is your battery? It might have a voltage drop and cause the controller to think its bad.

@michalchilczuk7043 Жыл бұрын

@@Corn-ped i check voktage when i drive becouse i have active screen from bms voktage going down about 1.5v only i think this is isue with controller becouse i have votol em150s and my bush bar is 250A controler take only 130A i think there is problem my bike is havy chasis from suzuki gsxr

@Corn-ped Жыл бұрын

The controller may be set up to cut off power if you have voltage drop more than 1.5v. @@michalchilczuk7043

@michalchilczuk7043 Жыл бұрын

@@Corn-ped what position on app can do that , on the first page ?

@Corn-ped Жыл бұрын

I was thinking it could be the undervoltage variation on page one. Maybe if you raised that it wouldn't shut off.