Wouldve spaced them further apart but look cool

Yep, they are too close together, spread them out Ryno

"Do you have the manual by any chance?"😂😂😂💀

Sergio hope I’m spelling his name rights seems like a good dude

Sergio knows his craft. I should contact him about doing K.I.T.T. lights on my truck 😂

at 17:13 the pattern you were explaining was called "wig-wag"

After watching you install these, I added 3 to my 2018 Silverado, I love them. Thanks

Sergio always dose good work, he needs a KZfaq channel so we can follow him.

Sergio is very patient. and that's awesome, I'm looking into getting my first OBS and these videos helps a lot so thumbs up my guy.

2 more light on the outside of the 3 u already have

Just a thought, go 4 pods. One in the far apart holes in the grill and then 2 in the large opening in middle of the grill. Love the builds or all the trucks. Ready to see the lly.

Sergio knows his stuff! He is the light Man! Any man that works .... is all good in my book! I don’t care where your from!

Cab lights are much needed now👌

Instead of redoing the spacing you should just add 2 more

Looken' good man! Maybe have him hook up your mirror lights as well to strobe along with your grill lights.

Looks good bro. I agree, I would spread the amber lights apart just a little. Too close for the wide body OBS.

Man Sergio is the man!!! He needs do KZfaq videos. But lights look awesome. Agree they could be spread apart but still look AWESOME

Sergio is a wizard man, he knows his stuff.

Sergio, is GODMODE! What a guy...

Surgo is going to move his shop just to get some of his work done. lol

Yeah spread them out i agree.

Lights look awesome bro🤙

Looks sick, I agree they should spread a little bit though. Thanks for all the content.

Sergio kills it again 👍🏽🔥

Definitely looks good. Great addition 🤙🏾

I don’t think there is a better truck that is as good looking as the Ford OBS. Its legendary

Love the obs color scheme! Plus i need my hitch plate ryno!!

Since Sergio reads comments I hope he sees this! You should start your own channel that explains these components! I was supposed to take physics this year but didn’t (senior during the closures) but I have always wanted to know about electricity and electrical components and you explain it better than any teacher.

Those look bad ass. Love the true amber color.

Feniex makes great products. My work truck has Feniex lights. Love it

Yes, finally..... definitely think they need spread out a little more or one more on each side farther out.

Those lights are badass

Sergio great work and skills.

Looks good 💯

Looks sick, they are a liiiiittle close together yeah

Always great videos

Just subbed just because you think like me, Keep the headlights clear and alot more usable. Truck looks great!

16:30 too much flashy flash 😂

Left maker light is out Looks good 👍

Going to add it to my 66 f100 cant wait to see how it looks .

I really do like what you do n show to use. Would you do a video of showing pros n cons on lights. Lift. Coil overs. Etcs

@DMAXRYNO you should install a EZ tailgate assist on the OBS so the tailgate does slam hard if some else opened it. I know it’s a work truck and you don’t want it destroyed

Hey bro i have a question whats a good led bulb to use for my headlights i have some now but they are not to bright and i have no idea what to look for

Man, I tell ya, I wish our local guy here was as personable as Sergio. Thanks for this video. I'm VERY handy and mechanically inclined. Installed our last setup (Whelen strobe BULB's) on a 2000 Tundra. (I'm wondering if I can use the old strobe controller for these new fangled LED"s???) And now, will install the whole kit and caboodle on a 2018 Tundra. Well, our local guy (as I don't really want to install these again only because I don't have the time) told me 6-8 weeks to order and get me in queue for a VERY overpriced installation. Well, KNOWING how to install these things, this video gave me an inspiration and adrenaline shot to move on and do the installation myself. If I was out that way, I would have Sergio do it as once again, he's a very personable business person, customer service based individual and VERY technically inclined. The array will also include a lightbar. OVERKILL? Yes, as we live on a BUSY road, (backing in an 18 foot trailer) and once the Christmas tree lights up, people will see it and hopefully STOP...haha.... Thanks for the inspirational video man!

Thats looks good man

Hey bro love your OBS, I just inherited one from my dad and want to do many of the upgrades you have done. Can you let me know where you got those mirrors? Much thanks, keep up the great content.

Super clean look...go for the Knight Rider strobe.

Those lights in the grill are so sick

Man he did a great job on the lights

Workforit my new favorite saying 😊😊😊

Can you recommend a set of tow mirrors for an 02 ford excursion. I contacted Boost and they said they don’t have anything for my year. I would really like power folding but don’t want too crazy expensive or super cheap

love the OBS truck build

I was thinking about changing my strobe setup to this on my sierra, but I just realized that the strobe function is probably using the dimmed output just like the running light right? I think those Feniex T3's only have one setting for their internal programming. I guess I will have to reach out for some help from Sergio!

Spread them out but besides that the build is awesome keep up the good work 👍

the term you were looking for is Strobe Tube also you should definitely do LED switchbacks for the Turn signals on the truck so you can keep the white to the front until the signals kick in to match your mirrors

I have used the same can of VHT nite shades for 3 sets of tail lights, some marker lights, and probably another few odds and ends, and I still have like half a can left 😂

@DMAXRYNO do you have a video with install of Feniex controller?

have you checked out the bluetooth cablights made by cab over america? I think they would look cool on the obs

Yeah brotha think they need to be spread out just a little more but the truck still looks awesome

We gotta get some more work vlogs!!

How much lift should I do that I’ll need a drop hitch? Any ideas I’m gonna buy a gen 2 Cummins want to make a a beast of a truck

Now I want this look on my Silverado

Maybe now some c4 rock lights in the future 🤔🤔🤔

I love the obs I have a extended cab f250 I’m jealous of the console

What are the name of the light you put in your grill I would like to do four them on my 93 I’ll obs 150

Hey Dmaxrino, I just subscribe to your channel, I like your videos and soon I will contact Sergio for some lights on my Duramax keep doing more videos to learn more about the GMC trucks.

I agree with you sored them out a lil more

You should get a tailgate light bar off amazon it goes in that little space where you wanted to put the rear strobe lights

Sergio seems like a cool guy

Personally I like that cluster in the middle I would just add two more lights to one in each grill pocket by the headlights and Center then in the middle of the grill pocket that would look really cool

Pretty good 👍👍👍

That is awesome.

That's the perfect guy to do business with. Listens to the customer and takes pride in his work! I hope he gets more work than he knows what to do with.

Sergio rocks! Those running lights are a tad too close together for my taste though. Looks a little like Kit from Knight Rider 😂

Agreed think they need to be spaced out a little more

I am looking to replace my g8he-1a7t-r2-dc12 relay. But I can not find one that is for low voltage for when I replace my bulbs with LEDs so I do not get hyper flash. Instead of using a resister can anyone help? Does IEP sell them?

Halogen bulbs I have 3 code 3 deck blaster that use them. They do exactly that.

Is Wes a navy Seabee? If not what rate did he choose?

You should get them in the front signal and have mode 1 for turn signal and mode 2 for Amber strobe, that’s gonna look sweet if you do that

If you plan on doing full led lights on the obs ur gonna need to put resistors on the tail lights from ground wire to the blinker wire with out them the tail lights come on with the key an it messes with your torque converter locking an unlocking it cuz it thinks the breaks are on

What kind of connectors does he use to link them all together?

Wow, exact same thing with ur turn signal wire happened to my ac wire

Let me get that pappapa strobe pattern Sergio.

Well when the time comes for some lighting on the Silverado I know where I'm taking it..

I like the lights but I would’ve spread them a little you could just put two more on it and it would look awesome anyways love the video keep it up!

4 grill hole 1 in each grill hole y so close together? It looks good tho.

Hell yeah like it

If you added a 4th light to your grill, you could have created that effect. Set the flash pattern to steady burn if you are hooking up to an external flasher controller. the Feniex hand held Typhoon allows you to create the back and forth triple burst flash. Just add a 4th light, and connect the two on the left to button 1, and the two on the right to button 2. solved.

Is sergio a package deal. Would love some LEDs on my truck but i need a sergio

What kind of front bumper is on the obs

I wish i could go to IEP.. my truck has so many issues with the electrical side of things that i just have never been able to figure out and its infuriating

I've got a manual for the obs if you need one.

Where can i go to get my lights put on professionally

Sergio needs his own channel

Looks good but I would add 1 more on each side. Coming together

What lift kit does Chris have?

I wanna do a setup exactly like that, but I don’t have anyone near me with Sergio’s skills to install them

They looked great, I honestly think that Ryno should have more subscribers... 5-10m..

you gonna put some PPF on the OBS? I'm doing my truck this week because highway rock chips are a bitch

Where can i find a place like this in austin tx