Such a cool little piece of art! That rpm is on 2 stroke level.
@bilbag9113 ай бұрын
Sorry, but that "2" identifies a 2 blade prop, NOT a 2 stroke engine...
@KariJari-kn8yr3 ай бұрын
@@bilbag911 I mean that 4 stroke revs as high as a 2 stroke
@luisgarza20363 ай бұрын
Of course it runs pretty well on 10% nitro, it's a little more finicky to dial in but it works really good, well it's a YS!
@austinsmith94133 ай бұрын
I have a ys63, unfortunately haven't run it as much as I would like either. Once that tune is dialed, the throttle response and power is👌
@FMo013 ай бұрын
11580 rpm with an 11x8 propeller, which corresponds to a power output of approximately 1000 watts. That is as much power as a 2-stroke methanol engine with this displacement provides, very impressive.
@Irvine7214x6apc3 ай бұрын
Despite the odd difficulty with tuning here and there (I suspect the fuel as you rightly mentioned) I'd say that's quite a successful run. Most amazing is the snap-quick throttle response, excellent engine, keep 'em coming David. Regards Harry
@keithgoode97263 ай бұрын
What a firey little beast!
@b.w.oostdam88753 ай бұрын
RUns fine, and is a real-world situation. Idle is quite high but what top-end rpm for a four-stroke. That was quite surprising. Thank you for the video.
@user-sf1ob2yd2t3 ай бұрын
Sounds mighty fine!
@marcobuonavita27573 ай бұрын
VIDEO INTERESSANTE GRAZIE
@markoreilly34143 ай бұрын
FZ 63 are a mighty little engine ! Once you have a chance to play around with it, you'll be surprised how bigger Prop they'll pull ! Nice buying
@Caninaracingatodovapor3 ай бұрын
ty
@ModelpilotАй бұрын
Hi David, how would this engine perform with a slightly bigger 12x8 prop ? my Saito FA62B runs with Coolpower 15% heli fuel 11870 rpm with a APC 11x8, switched to a 12x8 and still 10580 rpm but way better and smoother running ... eeh "Flying" :D i really appreciate your video's and i'm glad you still share your hobby with us
@dmrcflyr2Ай бұрын
Define perform. I am running props recommended by YS.
@stevebarr96043 ай бұрын
How many check valves does that one use, I've got to have 2 with my ys 120 !
@dmrcflyr23 ай бұрын
Only one is required on this per the instruction manual. Should only be one on yours too according to this manual. drive.google.com/drive/folders/1URXkXJelMdUuQOT0Ot06oKOGwDz_wTK5