Looks more like an EPR (Every Purpose Rifle) to me

The beauty of the AR-15/10 is we can build them how we need and what works best for us. Great video. I will be honest I switched a while ago to the AR10. That said I reload so my cost is low.

I love concepts like this. The army and USMC have already done a lot of reasarch trying to build "GPR" or what I would call infantry rifles. Both groups have now landed on a LPVO 1x6 or 1x8 with a 14.5(m4) or a 16(M27) keep testing keep pushing new ideas, remember weight is the enemy. Good video guys. I really appreciate how much work you guys put into this. Also think about placing your red dot on a different mount, especially if you are treating it as a back up sight. If it is a supplementary sight top is the way to go.

I like the build, looking forward to the evolution and seeing what else you guys share.

Love your videos! Im new into learning about firearms. these have been super educational videos! hope to continue to see more content from you guys

I just finished my 14.5 gpr. Absolutely loving it. Razor 1-10, dbal, RC2, Harris bipod, and Surefire light. Even loaded down with all that it still beats carrying around my sixteen inch AR10 that’s set up the same way. If I have to grab one rifle for a do it all, it’s going to be my 14.5

just got done thinkin abt how i havent see another tuber anywhere near trex arms in content and knowledge, and here i am. not quite trex arms , but damn this channel has potential to be something great . cant wait to see what yall have in the future. best of luck .

We need more videos man please. Keep it up, we love these!

I get that its a GPR, but with a secondary sighting system for close range and with a laser designation device, it looks a lot more like a D.I.A.R.R.H.E.A. I know it's a long acronym, but it's a simple one: Do It All Recce Rifle (and) Hostile Engagement Armament

great job fellas

Great vid. Love the content.

I live it man. Did similar with my block 2, law folder, and nx8 2.5-20, even put an LMT Enhanced BCG and bolt in it for longevity sakes. To me I don’t have a lot of money to invest in gear, but I want GREAT gear as this is my only hobby. When you have a GPR you can invest in the best glass and not feel guilty about it. Only thing ida done differently, if I had all the money at once and didn’t have to build over the course of 7 years is ida got an LMT mars with 13” quad rail. Having the ability to change barrel lengths, calibers, gas systems, with only a barrel or a carrier is the ultimate GPR. But the 2500 entry is hard for a dude that supports his wife and baby on only his income. One day she will be mine

“DER” - do everything rifle. Lets make it a thing

Fantastic video!

I think that emphasis on “my” gpr is actually really important. I think we get too caught up in is it an spr or a gpr or a. Modern urgis are 14.5s with 1-8 atacr with lpvos. See the problem is that’s GP for infantry and sof. But for civilians an 11.5 with a red dot and magnifier is going to handle pretty much all self defense scenarios within rule of law. Longer shots at animals but we’ll never be shooting at 200+ unless things are really really bad. Then the big guns come out. And then the spr is kind of general. The problem is “gp” is so subjective. It’s general based on the environment and situation you’re in. And I hate “if you can only grab one” because it’s basically asking “what do you think the best set up is to do everything ok but nothing amazingly well.” Which looks different depending on who and where you are. The context is usually put as only one rifle for the end of the world things aren’t going back to normal any time soon post apocalyptic kinda ya know the drill. But what you would choose now may be very different if you’re actually in that situation because what you thought makes sense now wouldn’t then. It’s so subjective and grey

Sweet build. I like the pragmatic approach of building a rifle for what you deem to make sense, rather and building what some door kickers may be using or what PRS shooters are using. Question: does that little Suunto compass actually work while on the stock? I'd assume there would be too much ferrous metal around to get an accurate azimuth with that little thing.

What optic mount are you using for both the Vortex 3-18 and RDS? Thanks for the video. I've been considering a similar optic setup on my 16.

Very cool! Is this in reference to black hills South Dakota?

What are you using to mount the red dot to the scope?

ready

I think people that say how heavy am SPR or any 13.7 14.5 16 18” 556 precision fighting rifle is, forget the autistic scratching that occurs at the mention of the name mk12 because everyone loves it that’s ever used it. Why? It’s a bit heavier and longer but what you get for the trade off is so much better than lugging around extra weight in gear you don’t need. Excessive gear will out weigh excessive gun, fast. IMO.

love these videos, what do you think about the MK-18 mod 0?

Any suggestions on a red dot mount for a similar setup with a 38-45 degree offset?

Your choice of a Command Hook to hang up your battle axe is concerning.

I think I have the same optic set up on my 18 inch. I have the 1.7 adm mount and for me, the dot on top was just slightly too tall. I canted it between the turrets and that seems to be working well. I may end up switching to a shorter mount all together though. Great video.

Awesome video. What colors did you rattle can the build? I’d like to replicate it cause it looks really nice. Thanks :)

Well I like it.

What profile is that barrel?

Is it 14.5 before or after the flash suppressor? I have a 14.5 1/7 right handed. With a sure fire war comp and a EOTech. I call it a CQB. A 16 with an ACOG with a bipod in the forgrip its my gen purpose. And a 16 I am tricking out as a recce build, 1×6 Aim point. I need a few things to finish it. Paint or not to paint? Do a video about that. Grande Thumb probably did a video about what your looking for.

yes

That's an MCR(Mission creep rifle)

I like the thumbnail :D good video!

I really thought I had a bad problem until seeing this video. lol I have a 16in and I’ve went from red dot / magnifier - eotech / magnifier - 1x6 lpvo and now I’m wanting to switch to something with more magnification and been on the fence between changing my 16in barrel to a 14.5 but at the same time I can’t seem to see the real difference between the two. But I know the purpose of my rifle to do exactly this… anything I need it to do.

Christ, that looks heavy, and that was before you said it was a Larue barrel. Does the loadout come with power bars to keep you going?

Carry in da tractor..on them Mandingo hunts pa...

Any chance you could drop a video on how to zero the otal? Thanks

holy gadgets

I love guns

What is the scope mount and the attachment to add the Holo RDS ?

What mount are you using for the holosun?

New sub I don't shoot dogs come on I love your channel on rifles as long as your not shooting animals just saying.VERRY SWEET BUILD WOW OUT OF THIS WORLD FANTASTIC.

I think its worth having 2 different rifles. Like short sword and long spear type beat

Is that the low ADM mount?

What kind of pistol grip is that? Looks awesome

Jack of all master of non

What's it weigh as outfitted on the table?

Actually I think that’s an spr (standard practical rifle)

Black hills SD?

That is the riser on the stock?

what grip is that?

Build list please

So, does a do-all rifle make your breakfast, lunch, dinner, and whipe your arse? Asking for a buddy of mine

What does that weigh??

I too remember MFR "my first rifle" . I hope this is a joke, cant watch these clowns to find out tho

Build Ak now camo

🫢

“Too heavy” boo hoo. go lift some weights

Scummy to use Garand and Mikah in the thumbnail for clicks. You were betting on people not checking the channel name

Looks like someone had too much time and cash to make something your probably not going to use under stress and or never even felt that kind of stress before .....silly youtubers everyone is so tactical these days lol.