Hey everyone! Thanks so much for watching this video! I took note of your thoughts and made an updated version! kzfaq.info/get/bejne/kKqYadeDzLDbimw.html

pro tip: use a cooling pad with just one fan, it''ll give almost the same performance as a multi fan pad... way cheaper, way quieter... if it has low rpm even better

I did not put my laptop in the fridge but I did put it on AC vent and it seem to help, while I worked, the fan never got load and the chasis temperature remained normal.

I applied PTM7950 to the CPU and GPU, replaced the thermopads on the vrams with Upsiren UX Pro Ultra and performed undervolting. In my case, the cooling pad is not necessary for me.

I have the Minisforum NUCXI7, it stands vertically with an open grate at the back from top to bottom. Do you think this will improve the temps? I need one with a stand. Its a gaming mini pc and not a laptop though.

i'm afraid of opening my laptop, i fear breaking it. is there any tips?

I saw your previous video on the same topic and this new one, nice job leveling up your channel. I enjoyed both videos and your sense of humor :)

what are you using to film your video

Good video. I like your lowkey sense of humor lol. I point a small fan at my laptop, which cools the aluminum chassis and deters the laptop fans from spinning up under normal loads. Once I go into photo/video editing though, the laptop fans will turn on and there's not much you can do. An external fan may delay the onset of thermal throttling though, but not by much Would love to hear more about your experience in Ukraine.

given the antiquity that you have as a laptop, is that useless? now on a gaming laptop it helps to evacuate the heat I confirm it.

A long time ago the internal fan broke inside my laptop. It got super hot and shut down until it cools down for me to turn it on again. I got an idea then to run home vacuum at the laptop vents for few minutes every 10-15 minutes while monitoring temperature on SpeedFan app until I replaced the fan for good.

I started with a laptop stand. It is a plain, hard plastic (folding legs) stand, that lifts the laptop off of whatever surface, hard or soft, there is. It has a gaping hole in the center and rubber stoppers to lift the bottom of the laptop off the flat surface of the stand. The Brand is Elecom. It is probably NOT available world wide. So there is ALWAYS airspace under my laptop and my laptops' own fans start and stop and speed up, as needed. So I was JUST Curious about laptop cooling pads. Thanks for saving me the money and effort to try one. (I was looking for brand name devices. Apparently, that does not make any difference.) Cheers.

Good walk through on your journey to find a cooling solution. There are so many variables with manufacturer cooling methodologies that it makes it difficult to find an all in one solution. Air intake, cooling fans and expeller vents all come into play. I think most people will have to do their own testing as well to find a best solution for them. I do believe that forced air intake is beneficial to most manufacture laptop brands, but time and testing is the only way to know for sure. Lots of exact use scenarios will help with this, so post your experiences people.

Really great video. I've been looking for people who talk about their experience with this accessory, but haven't seen much. I was going to check out your second video about this topic and ended up finding this, which is perfect! Furthermore, I think I'm going to buy one to help out my laptop and make my setup look more consistent, although I'll try not to spend too much money on it, since that's the most consistent advice I've seen from all of the vids around.

If people able, and i highly recommend doing this, is looking up the max operational temperature of the part you are cooling. Sometimes, software/firmware will set a max temp limit lower than the operational temperature to give headroom. But, when you get closer to this temperature, the component will purposely start to lower its performance to avoid going beyond the max temp. If you are careful and look into your specs enough to get operational temps for the components, you can increase your temp limits to a still safe max temp. This will help the components not bottleneck until it really has to bottleneck, meaning you will get better performance with the higher temps. This isnt a cure all but it helps. Of course you need third part software and knowledge to navigate the bios to do this but if you know how, it helps. Just an example, my rtx 2070 in my desk top has a max operational temp of 90c. The max temp it came set at was 80c. By increasing the temp limit to 90c, it now will operate at slightly higher temps before it actually starts to bottleneck and slow down.

I use a 16" gaming laptop with I9 13900HX cpu and 4070 RTX gpu. A good cooler will have large fans, not so many small ones. RGB is looks only, not real world functional imho. My ibservation has been this: 1. Raising the laptop to eye level is a big gain (Get cooler with adjustments) 2. Real world gain was 3-5 celsius for me

the only good cooling pad is the one you make yourself because you can choose any type of fan you want. A friend of mine made one with four 80mm fans that draw power from the wall, it makes his laptop cold to the touch, the highest temp it ever gets is 45 degree C when he games.

Never put it in the refrigerator because as you pc is getting cooled down it can build up conditions and the water that collects can damage anything in the laptop or pc or console dont matter what you use but will do the same in all

we share the exact same wallpaper image lol. I forgot what the nebula was called tho...

I am watching this because I am currently using a MSI GF65 Thin 9SD Gaming Laptop Core i5 for Digital Art with a XP Pen Artist Pro 16. The laptop get a little hot on the side of the laptop should be worry?

I recently purchased the IETS GT500 V2, I'm not hoping for a cooling boost even though it boasts a 5000rpm fan. I'm mostly getting it because it has a dust filter. Though I'm curious since this cooler has foam to seal the bottom and force the air through the vents, would that damage the laptop? I mean the laptop fans are idling if it's not in use and the forced air would make them spin. I found mixed responses online but nothing definitive

I just attach little laptop legs (to elevate the comp) and clean my fans regularly.

best improvement i had was a side vacuum

for people whit shitty computer like I used to have, computer use to warm up in general, x86 processor are hot, even arm processor heat up.

Great video. You’ve got talent kid….run with it.

I use pretty much the same kind of laptop stand, in addition to placing a fan under the laptop when it gets particularly hot (my laptop takes cool air from the bottom and expels hot air from the sides and the back, so placing a fan under it work wonders).

If you had budget gaming laptop like me, it is very helpful, not fps wise or perfomance wise. I have cheap gaming laptop with RTX 3060 6gb. 17.3 inch, 144hz. Cooling pad is for cooling not magically boosting performance. $750 is cheap but consider it has 512gb memory, RTX 3060 6gb, 8gb ram (bought 32gb RAM it is cheap) $60. AND $20 external cooling. So in total $830 for gaming laptop is cheap for RTX 3060.

I don't understand it, there's coming hot air out of the backside of my laptop, and when there's a cooling pad, isn't the pad than just blowing the hot air into my laptop again?

It sounds like you were insistent that you were having thermal issues and were wrong. I honestly use a cooling pad to lift it off my mattress because I use it in bed. My new laptop doesn't really get hot even when playing aaa games.

its purpose is to help with the airflow = Good Ventilation = Less Heat AND DONT PLUG IT IN UR LAPTOP, power it using a Phone Charger or a Power Bank. FRIGE? BAD IDEA, NOT ONLY IT WILL CONSUME ALOT OF ENERGY IT MAY ALSO CREATE CONDESATION WHICH CAN RUIN UR DEVICE.

Sorry to hear that you had to leave your studies in the Ukraine. I hope you are able to take up your training again if you haven't already.

I just want something that's not my lap that I can place it on but on my lap

I’d rather a bigger fan at slower rpm that’s quieter. The point is to keep it cool BUT reduce the noise from laptop fans.

I've been putting my computer on an ice pack with a towel to protect it from moisture. It works well but isn't a good solution on the go.

4:55 I'm definitely going to try it out 😂😂

Oh the holes on the bottom of that first laptop are HUGE compared to mine. But yea same issue with airflow direction. For my laptop, air goes in through the keyboard and out through the bottom and the "back" (bottom of the screen). Having a quality mini fan than blows down into the keyboard stops my computer fans, and stops the heat from rising up to my hands, which is unpleasant. I'm gonna see what just elevating it does (won't save my hands from warm air, but I'm curious). Maybe I can just have an external fan that is not super close, for that rising warm air.

The Fridge thing really did the trick Tat was not a joke though (am i in a loop)

my laptop has a really irtitating problem when i dont use the charger while gaming its very laggy but when i do its not but it just gets way to hot pls help

Hm, my laptop's cooling down a lot. Must be the doing of a stand nearby. 😉

Different laptops react differently to cooling pads. Size of the fan blades, the vents, their location, the RPMs of the fans... a lot of things influence this. Yes, there are situations where a pad will do literally nothing. And in some cases the CPU and GPU will boost higher and the temperatures and noise will still be the same, but the performance will improve.

I disagree, i do have an hp laptop with barely any air intake, 2 fans and a stand really made a difference even if it was like 20% better

Stumbled on this while looking for laptop coolers. Super helpful video! Look forward to seeing what you do in the future. Slava Ukraini!

i flipped mine to blow air in, better

It meant to keep surrendering laptop contact area steady cool so laptop internal cooling can benefit otherwise the contract area such as table will reach same temperature as heat of laptop thus stopping any heat exchange ! So you wrong and it works !

your main issue is small vents so no way for a cooling pad to work

hey I have the exact same background as you lol

Never buy an ekster wallet it uses plastic components I've gone through 2! Just dropping it waist level and the plastic mechanism breaks. Cheaply made, you'd think for a $100 wallet they could use metal components

They look good though but, I just feel the inbuilt fan can do all the cooling down jobs

I've resorted to flat ice packs. I stick one partway under my battery which also lifts the laptop slightly for circulation. Then when it starts getting really hot, I take another and place it partway under the front and or sides, careful not to block any vents. Meanwhile, everybody suggests: "or take it to a professional and have them clean out the fans" YES~EXCEPT~! I RETORT~! Where do I find one of these?? It is a serious question. I never see any storefronts or people advertising that do this sort of thing. And DO NOT put your whole laptop in the fridge~!! Metal shrinking and expanding over and again will begin to crack~!! Just ask anyone who wears partial dentures with the fine metal clips~! Yes, we elderly are still good for some advice, ha ha.

4:40 yeah sure why not 💀🤣❄

Pro tip: use liquid nitrogen XD

did dude really try to sell us iphone covers in an laptop type video lmao

a laptop in the freezer means a laptop popsicle. lol

Bought a 10$ cooling pad that has 2x 120mm fans and its really quiet put moves air pretty well Cooling pads will only benefit you if the laptops bottom panel isnt restrictive My TUF F15 has a decent bottom panel and it does move air inside the case very well as my ssd temps drop quite a lot

I do not know for you but for me Cooling pads are live savers if i open ROBLOX for over 30 mins the computer would be hotter then an oven and close my pc from overheating

Why did you cover the lens 😂

Holes are too small 💀

The holes were just too small 😂🤣👍🏿👍🏿👍🏿

If cooling increased preformance wouldn’t they just hold e sports events in Antarctica

Liked the vid and advice minus the innuendo girl jokes and the last never-ending not funny segment...consider this constructive criticism. Thanks for your thoughts, experience and links~!!

It's because of your laptop not because of your cooling pad

❄

Less you.. more cooling pad

❄❄❄❄❄❄❄❄

❄️❄️❄️

Like. Because you was studying in Ukraine

☝️❄️👍

Get yourself a dremel and the cooling pads can actually work. Just enlarge the existing holes or cut in new ones, just make sure to remove the backplate before you go ham on it or else you may end up with a decently vented pile of trash.

😜

❄

❄

❄

❄️

❄️

❄️

❄️

❄️

❄️

❄️

❄️

❄️

❄