Do THESE Things to Maintain Your G37!

Рет қаралды 55,054

Жыл бұрын

Do THESE Things to Maintain Your G37! IN THIS VIDEO I SHOW YOU WHAT I DO TO MY G37 TO BRING IT UP TO SPEED IN MAINTENANCE! HUGE THING TO DO WHEN BUYING A CAR SO YOU KNOW WHEN THINGS WERE LAST REPLACED!
My car is a 2004 Infiniti G35 Coupe 6MT Brembo Package Desert Platinum and has Muffler Delete exhaust
Follow my instagram at @thejoevazquez
SUBSCRIBE FOR MORE G35 VIDEOS! kzfaq.info?sub_...
WATCH THE PREVIOUS G35 VIDEO! • EVERY G35 Owner Do Thi...
Mod List:
Motordyne 5/16 plenum spacer
Motordyne mrev2 lower plenum
BC Racing True Rear Coilovers
Spec D Led Headlights
Nismo Z tube with JWT Pop charger intake
CZP 3.5" Aluminum Driveshaft w/ Foam Noise Dampening
Dasaita 10.2 inch Large Screen Double Din Android
Oil catch can
Custom Cutout exhaust
06-07 Updated Tailights
Hotchkis Adjustable Stabilizer Sway Bars
Roof wrapped in aAvery gloss black wrap
Idler pulley delete
19" Forged Rays wheels
Reverse camera installation
HOW MUCH DOES IT COST TO MAINTAIN A INFINITI G37? EXPENSIVE
Infiniti G37 regular maintenance
Infiniti G37 - How To Replace Spark Plugs And Clean Throttle Bodies And MAF Sensors
Infiniti G37 maintenance and running cost - original owner 8 years
I Bought a CHEAP Infiniti G37 Coupe!
3 Things to Help Maintain Your G35!
TOP 3 MODS YOU SHOULD DO TO YOUR INFINITI G37 FIRST!
Maintaining a BOOSTED G37
Check out my podcast! Chip & Joe Show: / @chipandjoeshow5205
g35 meet,joe vazquez g35,infiniti,350z,infiniti g35 review,g35 build,nissan,g37,g35 review,370z,vq35,infinity g35,joe vazquez,static garage,g35 exhaust,car vlogger,top g35 mods,g35 coupe,g35,g35 muffler delete,infiniti g35,g35 short shifter,g35 mods,g35 coilovers,infiniti g35 coupe,g35 headlights
Infiniti G Joe Vazquez g35 coupe mods g35 mods g35 muffler delete infiniti g35 infiniti g35 coupe 2004 infiniti g35 coupe g35 headlights g35 tail lights infiniti g35 muffler delete G35 Coupe Tricks - Key FOB and Interior Tricks Small Upgrade EVERY G35 Owner NEEDS!! G35 How to Program Key Fob!! Top 3 G35 Mods EVERY Owner NEEDS! How to program a Infiniti G35 remote key fob 2003 - 2006 HOW TO PROGRAM G35 KEYLESS REMOTE * G35-Top PERFORMANCE MODS* Installing My Spec D Headlights On My G35!! How to program Infiniti Keyless Entry Remote Keyfob Replacement Programming 3 Things to Help Maintain Your G35!
Small Upgrade EVERY G35 Owner NEEDS!!
BEST First Mod EVERY G35 / 350z Should Do NOW!!
The MOST Useful Thing EVERY G35 / 350z Owner NEEDS!!
Android Stereo Install | Infiniti G35
Watch This BEFORE Buying 75mm Throttle Body for your G35 / 350z!!
One of the MOST Overlooked Parts on YOUR G35 / 350z!!
Top 3 G35 Mods EVERY Owner NEEDS!
Looking for G35 content? How to make your G35 sedan or coupe faster? What mods to buy and how to install them onto your VQ? Whether you have a Infiniti G35 coupe or sedan, THIS is the channel for YOU! The content goes from the G35 getting a muffler delete to a custom exhaust! To installing performance parts and top mods from Motordyne, Z1 Motorsports, Concept Z and showing you how to replace ball joints and control arm bushings as well as common problems with g35's like oil consumption.
My name is Joe Vazquez and I am a G35 Enthusiast. I want to be able to learn and show everything about g35's! I want to make it simple to repair and work on your own g35 whether you have one or ready for when you buy one! You will get tips, tricks, how to, reviews, gadgets and more in this channel to help make your g35 the very best for you!
My car is a 2004 G35 Coupe 6MT Brembo Package Desert Platinum and has Muffler Delete exhaust
Infiniti G Joe Vazquez G35 cars, sports cars, motorsports
VQ35 INFINITI NISSAN CAR VLOGGER 350Z
This video is for entertainment purposes only. This channel Joe Vazquez assumes no liability for any repairs or modifications performed by the viewer as a result of the information contained in this video.

Пікірлер: 120

@w1nnin Жыл бұрын

All fluids, ⚡️ 🔌,battery, pcv valves, oil pressure switch, belts, pulleys, front sway bar link, thermostat & gasket, coolant bleeder valve…the rest inspect the car and add to list.

@ellac3440 4 ай бұрын

These were some amazing explanations and tips as someone who has been wanting to learn more about at home maintenance!!

@JoeVazquez 4 ай бұрын

Home maintenance?

@tleoipl37 Жыл бұрын

For the gallery gasket, get the EPS Kit. Also, look in to the bleeder core union, it’s on the back left hand side but they usually break at high mileage and can be PITA if not caught in time.

@exyon4741 7 ай бұрын

ik this was months ago but could you elaborate? wdym eps kit?

@tleoipl37 7 ай бұрын

@@exyon4741 the eps gasket and hardware kit to upgrade the gallery gasket. I have a few videos on my KZfaq channel that further explain this

@prodriftingchikee6910 4 ай бұрын

I have a 2012 g37 ipl with 206k miles I recently changed spark plugs but I couldn’t get out the 6th one cuz it seemed like it was seized in there what else would you recommend me to replace on the car and maintenance

@exyon4741 4 ай бұрын

@@prodriftingchikee6910 PB blast and heat to remove it. Maintenance wise, you could use some sort of carbon remover to clean the heads, a tune up which sounds like you already did, and just look under your car and check if there's any leaks, otherwise you're good to go.

@johnieg37s 4 ай бұрын

Bleeder core sucks but is a cheap part but when it does go you’ll be leaking coolant fluid everywhere mine went around 158k miles

@demonmystic4909 3 ай бұрын

I got mine when I was 19 and I swap the full rack and pinion including its tie rods spark plugs valve, cover gasket transmission fluid, oil differential fluid. Calipers brakes and rotors

@SportsMusicCars 9 ай бұрын

Swapped out the stale stock air filters with K&N pre-oiled ones. Made a nice difference and I always run 93, as 91 is nowhere to be found... Have videos posted of course and cleaned the t bodies as well

@randomproductions3706 Жыл бұрын

good stuff bro, cant wait to get my hands on my wifes g37 for a tune up highly needed at 200,xxx miles!!

@JoeVazquez Жыл бұрын

That’s awesome bro!

@eman_vq8036 Жыл бұрын

I wouldn’t mind G37 content but because I have a G35 definitely with you on that ! Keep the vids coming Joe 🙏🏻

@JoeVazquez Жыл бұрын

Hard choice but the right choice!

@rulas1000 Жыл бұрын

Thanks for doing this video, but it will help a lot if you explain step by step how you did all this work

@JoeVazquez Жыл бұрын

You’re 100% right, I’ve been doing step by steps for so long that now I do summary’s of the install instead

@SalemTechsperts Жыл бұрын

Presidents are temporary, Wu-Tang is Forever 👐 Good video my dude

@JoeVazquez Жыл бұрын

Haha hell yeah man!

@Qkfltpdls777 Жыл бұрын

Hi, I have some questions regarding JATCO 5AT’s ATF level, the same AT is in your car. FSM says ATF’s dipstick should be checked 30-50 Celsius degrees at COLD range and 65 Celsius degrees at HOT range. You know that the ATF’s dipstick’s HOT range is kinda grill patterned. At 65 Celsius degrees, where should the ATF be at HOT range?

@ksich8142 3 ай бұрын

Wow I’ve never saw a G37 that actually had the rear wheel steering motor . Pls do a video on it!

@NjBoriG35 Жыл бұрын

Nice G

7 ай бұрын

thnx for this info. I have the need for my DIFF BUSHING on my 2009 fx35, Do you know what aftermarket bushing will fit? INFINITI is ripping off people to get this bushing change.

@10kTaey 4 ай бұрын

“Presidents Are Temporary. WU-TANG Is Forever!” Yeah Yu Definitely Got My Sub😂😂

@JoeVazquez 4 ай бұрын

😂

@martymar2113 Ай бұрын

I don’t even have one I’m just obsessed with gs lol ima have one soon tho best believe 🤫

@Beliefacy Жыл бұрын

Tbh I will be putting my G35 on sale by next month. Everything on it is paid and has been upgraded/swapped. I was considering upgrading my vehicle to either a G37/370z or s197/s550 mustang.

@JoeVazquez Жыл бұрын

Sad to see you go brotha! But sometimes it genuinely feels like it’s time to move on from the build!

@vq.krisss Жыл бұрын

I just got a g37 and had just had my g35 finished from doing a fbo build which is great now I have a different project🤣

@JoeVazquez Жыл бұрын

That’s awesome bro haha

@strictlythrees-1526 Жыл бұрын

Don’t waste your time and money going FBO save for boost😂😂

@trevinoemanuel 8 ай бұрын

I just got my gallery gaskets done, bought all the parts from z1 sports for about 2k and labor around 1300 yea it’s a big job apparently

@JoeVazquez 8 ай бұрын

Labor is always the devil

@_benjaminwang_ Жыл бұрын

Great contents man! My 08 G37 sometimes has this weird noise coming from the front left suspension area when going over bumps, it's kind of a rattling sound when the car's cold, but turns into a squeaky sound when the car gets hot, after watching your video I am starting to wonder if it is tie rod issues, gonna go take a look at that soon

@JoeVazquez Жыл бұрын

Check for looseness or play, could also be your sway bar end links, so just start grabbing things under there and see what has play or looks kinda funny

@NjBoriG35 Жыл бұрын

Same issues. Think it's the links or loose exhaust

@matthewparilla3230 Жыл бұрын

definitely love the g35 content man! you actually inspired me to make content on my is300 in the near future. questions about the oil cooler though, do you know what part of it failed ? and do you still recommend buying the brand you installed?

@JoeVazquez Жыл бұрын

I appreciate you bro! That’s amazing! The part that failed was the cooler core itself, it had a leak in the bottom of it and just started pissing out! I could buy a replacement or even get a better brand and then be good though so it’s not a huge deal breaker!

@1234brahh 5 ай бұрын

At how many miles did you change the transmission and in differential fluids?

@benzgutierrez 7 ай бұрын

Nice vid! Where can I find that transmission filter?

@JoeVazquez 7 ай бұрын

I found it on rock auto!

@szn_gypsy Жыл бұрын

If you do get rid of it how much would you sell it for

@Mulanesse1 11 ай бұрын

My only challenge is replacing the transmission fluid and break fluid lmao. I will attempt the transmission fluid so my question is does the transmission pan have a gasket or is it just bolted by the bolts? If so do I need gasket maker or is there one I can already purchase? My last question is what tool do I use to refill the transmission from the dipstick since the dipstick is so tiny?

@josuegutierrez6257 25 күн бұрын

Hopefully you’ve found some info and were able to get the maintenance done, however if not; Every metal part that attaches to another metal part usually has gaskets (pan to transmission/upper pan). The gasket should be available at your local parts stores, but can be found cheaper online. As for filling the trans, I’d recommend a thin tipped funnel (imo, it’s best practice to always replace filters when you’re dropping fluids) Hope this helps someone!! - A Former Diesel Tech

@tomzphone 9 ай бұрын

You can use the Valvoline max life transmission fluid instead of the expensive nissan fluild. Approx $25 for 5 quarts. I have been using it on my 2003 G35 with 300k miles now and 2012 G37 with 131k without any issues.

@ptinker106 5 ай бұрын

Just got a 2013 g37 couple days ago with 90k on it. I did brake fluid today but how often do you do the transmission fluid and filter?

@klenthecreezi1041 5 ай бұрын

@@ptinker106you don’t change filter, just the fluid, or if you’re more able with your hands you can drop the trans pan and clean it + change gasket. Usually about every 60k mi or 45k if you beat it up every single day

@ptinker106 5 ай бұрын

@klenthecreezi1041 Yeah, 30-60k seems about right. Most car maunfacturers say the Trans filter is not serviceable and guaranteed for life, but if I drop the pan, I usually spend a couple extra minutes to change the filter. I think there is a baffle with bolts. I would do filter once per 100k to remove any contaminants.

@tomzphone 5 ай бұрын

my g35 has 298k now, not once did I clean the filter. Just a drain and fill every 40k or so. Trans still runs like new.@@ptinker106

@faridtavakolmoghadam Жыл бұрын

Thanks for the video! My mechanic told me to use the OEM Air filters since the other brands may deform or throw a CEL. I also changed my transmission fluid and it was pretty dark (no burnt smell). Will wait for a couple of months and do another change with a pan drop. Was wondering how did yours look? Also don't forget the transfer case fluid!

@drjimjam1112 11 ай бұрын

Put in 2 K&N filters and had no problem with it throwing codes. Seems to run better also.

@prodmcn 10 ай бұрын

i second this@@drjimjam1112

@Petesworkshop2225 7 ай бұрын

@drjimjam1112 Ya same here. But hate buying 2!!

@gloglo1275 Жыл бұрын

I have an 08 g35, 2010 g37 and , 04 350z roadster

@SWright1978 3 ай бұрын

I do wonder sometimes why a Toyota ad pops up when I'm feeling out on my Infiniti.

@JoeVazquez 3 ай бұрын

😂

@justchrisTTV Жыл бұрын

yo are you from Pittsburgh? I have a g37x getting a new transmission because I never saw this video lol

@justchrisTTV Жыл бұрын

im 30 from Pitt

@JoeVazquez Жыл бұрын

I’m from socal

@HectorPerez-bb3ys Жыл бұрын

Hey Brodie, how much atf fluid did u use to refill the transmission ?

@alexandergonzalez333 Жыл бұрын

Any answers?

@JoeVazquez Жыл бұрын

I think what came out was like 5 or 6 quarts

@VHRalexisYT 5 ай бұрын

Did you use Matic J tranny fluid for yours? I also have a 08 G37 base 5 speed been seeing people savaging to use matic s or magic j, but since we have the same car figured it would be what your using?

@mohamedhosini2103 4 ай бұрын

My dealership recommended Matic S for my 08 G37 and yes he used the same in the video

@Tommikegetitright101i Жыл бұрын

Highly recommend 0w40 or 5w40 for VHR engines

@JoeVazquez Жыл бұрын

I’m very interested in these findings! How’d you get to 0w40 and 5w40 being what you’d use for daily driving oil? 😮

@Tommikegetitright101i Жыл бұрын

@@JoeVazquez 0w40 or 5w40 protects the gallery gasket. You can daily it 100% 40 weight won’t hurt if anything it protects your engine and less oil burning too

@JoeVazquez Жыл бұрын

Woah that’s pretty cool definitely didn’t know that! Thank you for sharing, only time I used 5w40 was for the track!

@gloglo1275 Жыл бұрын

@@Tommikegetitright101i Is running the thicker oil safe? I have a g35 HR and my oil pressure is at idle 15 and 35 psi at 2k. I tried the Lucas synthetic but I guess it might be better running thicker oil. Someone told me not to run different oil than what it’s recommended. Someone did tell me to run 20w50 to bring the oil pressure up.

@cooldaddyslick6869 Жыл бұрын

@@gloglo1275 Scotty Killmer says to only use the oil that's called for from the factory.

@shyanprasad1721 Жыл бұрын

What do you think of redline fluid for transmission and diff

@JoeVazquez Жыл бұрын

if you’re going thicker or thinner, have a very good reason for that! I found redline tranny fluid on my g35 made it shift worse than oem, so I swapped back and was wayyyyy happier with it!

@cooldaddyslick6869 Жыл бұрын

A lot of people, including me, prefer BG trans fluid vs oem. Smoother shifts.

@marlonmcderby5058 Жыл бұрын

How much time would it take to replace lower control arms on a g37x coupe is it a easy job is it straight forward? Thanks

@iankyluik4210 Жыл бұрын

I did mine it took about a half a day for each side. It’s pretty straightforward though.

@JoeVazquez Жыл бұрын

When I was down there, it looked very straightforward but always leave wiggle room for” just in case things aren’t going right”

@investinjahcoin5029 Жыл бұрын

If you have proper tools, especially a good impact and a torch, shouldn’t be too hard. If you live in a climate with rust, it’s gonna be a lot more difficult. I can replace 1 side in about 2 hours at my shop. But if you’re more of a beginner it’s probably a 1-2 day job

@JoeVazquez Жыл бұрын

Definitely agree! Tools make or break it time wise, it’s awesome to have everything go smoothly haha! Where’s your shop located?

@investinjahcoin5029 Жыл бұрын

@@JoeVazquez it’s not just my shop, but I work as a technician at Infiniti. Just started a couple months back. Pretty much my dream job. I get to work on g37’s almost every day 😩

@marlonmcderby5058 Жыл бұрын

Hey are Ty rods and swar bar end kinks similar?

@JoeVazquez Жыл бұрын

They are different, tie rods are for steering, end links are for the sway bar to be able to do it’s job properly

@marlonmcderby5058 Жыл бұрын

@@JoeVazquez thanks 🙏🏽

@panchogomez4238 Жыл бұрын

Should I do transmission flush or just drain and fill? I have 155k miles

@JoeVazquez Жыл бұрын

Just a drain and fill bro!

@kylesteppin Жыл бұрын

but I mean if your selling it can I have those parts

@kylesteppin Жыл бұрын

Where u get the carbon fiber parts in your car

@JoeVazquez Жыл бұрын

They’re just wrapped in some carbon fiber wrap

@raymcintire6296 Жыл бұрын

I can’t quite make out what the small print for the sign on the wall behind you says. I see WU-TANG FOREVER but that’s all I can really see.

@JoeVazquez Жыл бұрын

Presidents are temporary, but wutang is forever

@raymcintire6296 Жыл бұрын

@@JoeVazquez 😂

@JoeVazquez Жыл бұрын

It’s not mine but i appreciate the joke 😭😂

@ericyedloski6551 20 сағат бұрын

Why not the front differential fluid or the transfer case

@JoeVazquez 20 сағат бұрын

Because it’s not an awd vehicle, it doesn’t have a front differential

@cooldaddyslick6869 Жыл бұрын

The G37 takes Dot 3 brake fluid.

@PromisezKept Жыл бұрын

Good move to sell. More G35 content plz

@JoeVazquez Жыл бұрын

I got you man, I miss making content with it haha

@nathanisdank Жыл бұрын

Are you based in cali? I’ll buy your G37 😂

@user-ok6zk3tu8l Жыл бұрын

I’m interested in buying it if you still selling

@JoeVazquez Жыл бұрын

Sold it already bro!

@ryzetv1659 2 ай бұрын

Hey I’m a female how much should I be expecting to pay if I took my g37x to a mechanic and asking for all this?

@JoeVazquez 2 ай бұрын

To be honest, prices fluctuate so much from shop to shop depending on how much work they have, how much their shop rate is per hour, and various other things. I would drive around with the list of things you want done, and ask each shop how much rhey would charge for it all! I hope this helps you!

@ryzetv1659 Ай бұрын

Thank you!

@JoeVazquez Ай бұрын

Of course no worries!