To anyone doing this in the future, after you open the drain valve on the rear filter housing as he shows in the video and it stops draining, loosen the main cap(not all the way off) and you will get more fuel draining out of that drain valve. Then grab a plastic bag put it over the whole thing, turn the cap until the filter comes out and the whole mess will be in your garbage bag. No spills, no stink, done. Same thing with your oil filter put a bag around/under it once its loose, turn it by hand with the bag covering it, let it fall down in that hole with the bag and you wont spill oil all over the damn place.

Nice breakdown of tubing and equipment needed in play, appreciate the video

Thank you for your time and effort to make this video, really appreciate it

Thank you for the video and tips. Saved me a lot of headaches using your ideas

Thanks for the video, I’m glad I watched it because I had to dig in the trash for the box and sure enough, there was an o-ring in a plastic bag and this was just from the front filter

This was a good video. Thanks for the insight. I just bought a 2023 and will need to do this shortly.

Same filter’s I use in my 21 ho. So far so good. I try to change mine ever 9 or 10,000 miles . Prob a waste of money , but I feel better changing them alittle earlier than I have too.

Great video. Thanks!

Kudos to Dodge Ram for their 100% piss poor placement of these filters.

Thanks brother

Thanks. That was easy.

I have a '22 Cummins HO as well. I use a short plastic empty coffee can that fits perfectly under that rear filter. Let us know how you like those 'Docs' filters. As of yet, I've only used Mopar. Thanks for the video.

Thank you! Could you beleive the dealer here in Montreal was asking 300$ per filter to replace them!!

Appreciate the video. I’m new to owning a Ram Diesel so this helps. Love the dog in the background in most of your recording. My wife’s dog loves hanging out in the garage with me while I’m doing whatever as well.

Cool

How good are these filters I’m thinking of ordering to save myself money caused my dealership charges $220 MSRP and I do them myself

Hey are you sure it’s a 28mm socket for the fuel filter cap?

I didn’t see you put the juice in. Doesn’t it need it?

How long is that 1/2 pvc plastic tube

I’d never use that crap on my truck!

You can delete the engine block filter by putting a Cat 0750 fuel filter with a Baldwin water separator at the rear and get rid of the proprietary oem crap.