I honestly didn’t think I would find a video like this on KZfaq but I’m glad I did. Awesome video! Exactly what I needed to see 😁

It is the only post on KZfaq for this roof molding thanks for taking the time to post it at least it lets me see what I'm in for as far as taking the pieces off and installing the replacements

You are amazing!! Thank you for taking the time to make this video!! Saved my day! I love my little car and was starting to dislike over something I didn’t know I could change myself!! Thank you thank you thank you!!

Your video was just what I needed to give me the confidence to take this job on. Was so tired of hearing the flapping of the pieces. Was so simple I can't believe I hesitated ap much as I did. Thx for the info.

Lucky man that SRT4 is a blast to drive...keep it alive and well

Thank you for sharing this, much appreciated. I dislodged mine as I have a tendency to constantly grab the railing as I get into the car. Now I know how to put them back into place. Thanks again. Tom - Brisbane, Australia.

Just what I needed to see, thanks

Thanks for doing this. I'm about to switch these out on my '07. Thank you!

Thank you! Easy instructions I was able to do this myself in under an hour and not pay $155 for this installation.

Thank you SO MUCH for taking the time to do this!!! I really appreciate it. This was so healpful 🙂 I hope you have a good day, a good day like when you find a $20 bill in your laundry or something.

Good shit. I need to switch these out on my caliber to

Thanks man. I've been looking everywhere how to Do it. Great video.

Great Video very detailed and informative we thank you

Thanks man! This was a huge help.

Thanks for your time and info

Omg...mine would blow around so i just pulled all the plastic off. Now it looks like crap. I was able to find some good one at pick a part then i had then wrapped gloss black. Thanks.. Thanks!

*Thank you so much for this video,man!*

Spot on man I appreciate that, hell I think we all appreciate it lol.

Thank you for this video!!!

Awesome!!! Thanks for sharing…

THANK YOU!!!

Thanks for sharing

Thank you

Thanks for this im about to do mine. Thinking about getting then vinyl wrapped to preserve them .

Excelente vídeo. Había buscado antes alguna instrucción para cambiar estas piezas de Caliber. Haz hecho un buen trabajo y será de mucha ayuda para otras personas. Bendiciones! En dónde compraste las partes?

The timing couldn't be better for this video ... I am having the same issue With my 2011 caliber...its the only thing deteriorating on my exterior

Thank you for this

hello , thank you so much for this helpful video. Do you know where i can buy some of those white clips?

I was tired of super gluing my trim together

Awesome video and just what I've been searching for!! I'm in the process of trying to "restore" a 2007 Dodge Caliber that belonged to my Son while in College. He abandoned it a few years ago after he got another car! LOL! I'll be going out to try to "harvest" the roof molding for both sides today although I've seen a few cars on the yard where it had already been stripped. I would like to know if the rear spoiler plastic molding that I have on my 2007 Dodge Caliber SE can be replaced and if so how do you do it? My spoiler is cracked and crumbling on both ends and that along with the torn stripping is causing water to leak into the door in the rear!!

Thanks bud

I need this upper roof trim for my dodge caliber 2007

Wow thanks

Well i dont suggests pulling up there is a good chance you will break the clips. They silde right off left to right.

The piece by the windshield, those clips would be easier to remove with a needle nose plier then put on like you did with the rear then reinstalled

hey thanks so much for this! got an 09 se but this will do.... I was searching for video assistance on installing new weather stripping on mine....trying to avoid buying a total new one or searching the tow yards but I see yours came with that damn stripping attached!!! ugh..... wonder if I could how much it would cost me? any other tips I'd love for mine... everything is going down buts it's all I've got! thanks for the post!!!

i own a srt4 and i’m wanting to replace them, now does the r/t and sxt caliber roof trim fit the srt calibers ?

Thanks for the awesome video, do you think it's possible to find brand new moldings?

Where can I buy these replacements?

Thanks for video! Question- you said you bought your replacement on ebay. We have a 2007 dodge caliber- when finding the parts do I need to know what cylinder etc it is?

So you have to replace the whole trim assembly. You can't just replace the seals that dry rotted?

Anyone know where to get replacement clips if you break any brittle ones?

Can you please comment on what that part is called so I can order it Please and thank you

AMIGO DESDE VENEZUELA DONDE PUEDO COMPRAR ESOS REEMPLAZO DE LOS PLATICOS DEL TECHO, SI HAY UNA CASA QUE LOS VENDAN MANDAR EL LINK O RESPONDAME POR AQUI GRCIAS

Buen día... Donde los compraste?

Any idea where i could buy those white plastic clips? I may have snapped some. (2:29 min)

Nice rims !! Is that srt or sxt ?

Where did you find the replacements??

In need of this replacement.. can someone give me a link where I can get. I read someone put rockauto but I cant seem to find the part

Where did you order the moldings from? Can't find them anywhere

Did these cause a leak?

Do you know where I can order these new?

How much you paid for these on ebay?

Estoy en Venezuela quien me puede ayudar con enviarme el módulo tipm y unos faros como el que tiene esa camioneta 🙏

Where did you buy them?

Wouldn't it be easier to just replace the seals?

why not just replace the rubber weather strip on the part itself? makes no sense to replace the entire trim piece

My car has been flooding What is that awful sound in the background

Thank you for this video!