DODGE CHALLENGER DYNOMAX 24250 RACE BULLET MUFFLER MOD - IS IT BETTER THAN A MUFFLER DELETE???

Рет қаралды 68,278

4 жыл бұрын

Hey everyone! I am very excited for today's video. I finally pull the trigger and cut out (delete) the muffler off of my 2017 Dodge Challenger 392 Hemi Scat Pack Shaker. But instead of keeping it as a muffler delete or doing a straight pipe and removing the resonators (resonator delete), I replace the mufflers (mid-mufflers) with the Dynomax 24250 Race Bullet Mini Muffler. These mufflers pack a ton of sound in a very small size. I personally think it sounds amazing! It takes the sound from the stock mufflers and amplifies it - there's more grunt, crackles and pops, growl, and depth in the sound. All of this for around $200 so I think it's definitely worth it. But let me know what you all think? Don't forget to like, share, and subscribe if you enjoy the content! Also find me on Instagram @SchwayZ_.
Feel free to fast forward to 10:31 for the before and after clips of the stock muffler vs the Dynomax mufflers.
Also huge thanks to Paul for doing the installation. If you are looking for an expert mechanic in the Salt Lake valley, DM me on Instagram and I will connect you!
My Amazon Affiliate link for Dynomax Race Bullet:
www.amazon.com/dp/B007ISYE1I?...
More Amazon Affiliate Links - I started an Amazon page dedicated to all the products I use. Full disclosure, Amazon gives me a small commission which I use for the channel:
www.amazon.com/shop/schwayz_

Пікірлер: 293

@jimferry4751 3 жыл бұрын

I just came back from getting mine installed. Very impressed and exactly what I was looking for. Just right. Nice day out so time to go drive my car. Thanks for the video. I paid $134 for the install and they supplied the extra pipes needed. Well done.

@SchwayZ 3 жыл бұрын

So awesome! Yeah it's the perfect mix of loud when you need it and quiet when you don't. Hope you enjoy your drive and thank you for watching!🙌💯

@biketom5 2 жыл бұрын

Nice job on your video! The different before and after segments provided very good comparisons of the sounds. I also installed the Dynomax Race Bullets back in June of 2019 on my 2012 SRT8. The mod was definitely worth the money and saved me from going with the expensive cat back option.

@2016RT 4 жыл бұрын

Definitely a must do mod for Challegers & Chargers! I did this mod about 6 months ago and still love them to this day👍🏼 You car sounds and looks great bro!

@SchwayZ 4 жыл бұрын

Thanks man!

@Spartan826 3 жыл бұрын

Just installed the Dynomax on my 2019 Charger RT and it sounds awesome .

@airforceveteran71 3 жыл бұрын

Just bought a 2019 Challenger T/A 392 with Scat Pack and the exhaust does sounds awesome but this affordable mod will raise it to the next level...thanks for the video and review.

@SchwayZ 3 жыл бұрын

Most definitely! Thank you for watching and I hope it helps you on your journey of loudness 🤣

@mikepoint4983 4 жыл бұрын

I just did the muffler delete on my 16 Scat pack shaker and wasn’t totally 100% happy with it, the bully’s you installed sound way better . Back to the drawing board I go . Cheers

@erobins8352 2 жыл бұрын

One of if not the best well done well edited and put together on before and after video on these bullets on you tube tip my hat to you bro 🤙🤝

@SchwayZ 2 жыл бұрын

Glad you found it helpful!

@daleturner3507 2 жыл бұрын

I think you’ve convinced me this is the way to go! My buddy did the full muffler delete and it sounds good but it’s missing something! Idk it has lost some of the higher tones maybe? But this sounds good.

@marcaineasunder 4 жыл бұрын

This is definitely the route I went.it sounds amazing!!!!🤘🏻😆🤘🏻🔥🔥🔥🔥🔥

@hairychesticles1 4 жыл бұрын

short answer is yes its better. its not to loud unless you want it to be and you dont get any negatives like drone and slight performance loss from lack of back pressure. i love my race bullets and it sounds almost stock when the valves are closed. it basically sounds the same as stock but at like 3 times louder (basically what he says)

@davidross1332 4 жыл бұрын

I custom ordered my 2020 Dodge Challenger Scat Pack Shaker with hood pins! Go Mango! It's coming in on the 27th, I'm going to order these now and get that delete done, thanks man ✌

@Amperrs 4 жыл бұрын

did u get it?

@madlion8733 4 жыл бұрын

As a 2015 scat pack owner with the race bullets installed, I can promise you two things...a smile on your face and turning peoples heads. Dodge really got it right with the stock exhaust, but the bullets take it to the next level. Lots more pops and crackles. Also, this mod should cost no more than 90-150$ its not complicated. should take no more than 30 min at a good muffler shop.

@hamzaquadri4956 2 жыл бұрын

Just ordered them for my 21 scat pack. Excited about it lol.

@Murphys_Law9 2 жыл бұрын

$150 plus tax for me

@82buffnasty 2 жыл бұрын

I swapped my mid mufflers and the resonators with the bullets!!! The Chally sounds like a BEAST!!!

@Murphys_Law9 2 жыл бұрын

@@82buffnasty I replaced my mids with the race bullets, thinking about doing the rears as well. Is it too loud?

@alexander_3923 2 жыл бұрын

@@Murphys_Law9 yea thats what im wondering too if it will be too loud removing the rears and mids with bullets

@Hellraisin-ml3pv 2 жыл бұрын

Great video bro you did it again you save me well over $2000 I’m gonna put this on my 2020 challenger scat pack the granite gray regular body thanks again keep the videos coming

@christopherwasko7329 3 жыл бұрын

Excellent sound and video depicting the before and after. I would say that she’s noticeable now! 😎

@SchwayZ 3 жыл бұрын

Most definitely! Thanks for watching!

@comradeyuri8492 3 жыл бұрын

i had this exact same change out on my 2 week old 2020 Scat Pack. Perfect quiet at cruise, no drone. But when you give the car some gas it really rips ! I give this a 10 !

@SchwayZ 3 жыл бұрын

Same!

@Jerrence-zh3de 3 жыл бұрын

Looking to get this set up done to my 1320.

@CCW-wg8ds 3 жыл бұрын

@@Jerrence-zh3de did you do This on your 1320 I have a 1320 looking to maybe do this what's your opinion

@Jerrence-zh3de 3 жыл бұрын

@@CCW-wg8ds no not yet, the stock exhaust sounds pretty good to me for the moment. It sounds even better in drag mode.

@CCW-wg8ds 3 жыл бұрын

@@Jerrence-zh3de mine is done a week ago Man what a sound.

@Wyatt_Pauer 11 ай бұрын

I replaced some flowmasters with these race bullets on my 1973 Dart Swinger with a Magnum 5.9. What a world of difference on sound and performance.

@SNeal5966 4 жыл бұрын

Nice!! I have been trying to decide between these and the Vibrant 1794 for my Scat Pack Challenger myself....This does sound nice in your vids!

@mikewolfskhal8782 2 жыл бұрын

I know this is a two year old comment but on my old 21 Daytona 392 I did the vibrants and it was so deep that I felt it resonating in my chest in a awesome way. Definitely recommend for old school sound.

@billyc4673 2 жыл бұрын

Great video. Look forward to checking out your channel. Calling my mechanic today get these installed.

@sheldonberry5963 4 жыл бұрын

Great video, most helpful on KZfaq for this mod. What is the size of the extension exhaust pipe? 3inch or 2.5?

@roknows4 4 жыл бұрын

Getting ready to order now! Good video subscribed 💪🏽

$@lovethesmellofracefuelinth7374$

@lovethesmellofracefuelinth7374 4 жыл бұрын

Sounds really good, and know a few other guys that have got the dynomax on their Challengers as well. I went with the SLP loudmouth cat backs on my Challenger, and sound awesome. They basically consists of open chamber racing bullets on 3in pipe and eliminates the resos, so they're nice n loud and are perfectly matched to the hemis. As far as exhaust systems go, they are the best bang for the buck at 6 bills. BTW I noticed that the plates are Utah and lived there most of my life, until about twenty years ago and now are located in AZ

@jamesmcclendon3932 3 жыл бұрын

Wow, that sounds beastie and sick!

@jamesamanna5617 3 жыл бұрын

Great video, I was on the fence too. I did the same mode well done thanks 😊

@SchwayZ 3 жыл бұрын

Thank you! Yeah I love the Dynomax all the way!

@liljoesanchez1958 3 жыл бұрын

I've been wanting to do the same sounds awesome going to be getting this for my 2020 shaker thanks 😊

@SchwayZ 3 жыл бұрын

You're going to love it!

@utubeOGItsYoutube 3 жыл бұрын

exhaust clips are so good, great vid

@SchwayZ 3 жыл бұрын

Thank you! 🙏

@alexanderziegler8664 Жыл бұрын

Excellent video. Would you recommend on a 2019 Challenger GT? Would the difference be worth it?

@MrDebron11 3 жыл бұрын

Wow I just remembered I have those in my trunk I’ll definitely be putting those on tomorrow morning!! Thanks bro!!!

@SchwayZ 3 жыл бұрын

You're going to love it!

@Sky1 3 жыл бұрын

I still have mine in the boxes, did you install yours yet? I just don't want raspy shit

@SchwayZ 3 жыл бұрын

@@Sky1 it won't be raspy I can tell you that for sure

@MrDebron11 3 жыл бұрын

@@Sky1 not yet I’ll do it this week coming up for sure

@thehellraisinhellraiser3251 3 жыл бұрын

Best exhaust comparison I've seen brother! 💯🔥💯 Way better than the mid muffler delete! If I mod my exhaust this is the route I would take. 👍💪👍

@SchwayZ 3 жыл бұрын

Appreciate it man! Yeah dynomax is the way to go! I plan on doing the same for my hellcat

@thehellraisinhellraiser3251 3 жыл бұрын

@@SchwayZ That should sound wicked cool brother!

@SchwayZ 3 жыл бұрын

@@thehellraisinhellraiser3251 I'm hoping so! Thanks my man!

@OctonaBoyFresh 3 жыл бұрын

I did mmd on my 19 r/t and it sounds great. I don't know if it's the 5" tips or not but it sounds pretty deep and not raspy. Loud warm starts and idles

@thehellraisinhellraiser3251 3 жыл бұрын

@@OctonaBoyFresh My brother SRT Thr333 has the MMD on his Scat Pack Challenger and it sounds good too with a low rumble and not raspy. And some guys sound really raspy with it so I'm not sure what makes the difference.

@hairychesticles1 4 жыл бұрын

Best mod i ever did to my scatpack

@mr.300c 4 жыл бұрын

Great comparisons! I like the cost associated with this setup! Its definitely louder and there is no rasp like a typical mid muffler delete 🤔. I'm sure there is no drone either. Strong amplified muscle sound! Excellent work! #saltcitymopars

@SchwayZ 4 жыл бұрын

Thanks man! Much appreciated! Yep those were the reasons why I chose the Dynomaxs over the muffler delete.

@jennifertrevino8004 3 жыл бұрын

@@SchwayZ post a link of which ones you got. I need ones that fit mine 2016 dodge challenger sxt v6

@SchwayZ 3 жыл бұрын

@@jennifertrevino8004 the link is in the description. Your auto shop will need to find the right size of pipe to make up the difference between the muffler and dynomax

@jennifertrevino8004 3 жыл бұрын

@@SchwayZ thank you

@jennifertrevino8004 3 жыл бұрын

@@SchwayZ one more question I promise lol, I see yours is a scatback. Would this sound be different on my car since I have a v6 sxt 2016 if I do the same mods you did?

@henryisrad 2 жыл бұрын

I went with these mufflers after extensive research on KZfaq and it was the best choice I ever made. The previous owner did the muffler delete and it was just way too loud and untamed in a bad way. I have the 6p manual and I like to just let it Coast coming to a stop sign or light because the pops and crackles are music to my ears. I told a guy I spent about 200 or 300 bucks because I got the quad exhaust tips as well and he thought I said two or three thousand and I said no two or three hundred and he was absolutely shocked. He said he was going to go put them on his Porsche Cayenne right away. I can't stress enough how much better these mufflers make the whole exhaust sound. It is an absolute waste of money to spend thousands on a Cat-Back system. Kudos to the guy that made this video he really did a great job.

@christianbaya3129 Жыл бұрын

Does it matter which way the mini race billets face when installed? I noticed that one side is shorter, I get mine installed Tuesday !

@henryisrad Жыл бұрын

@@christianbaya3129 I have no idea but based on the way the inside looks I think it's basically reversible. It should sound the same either way. Did you keep the resonators on in the back? How are you liking it so far?

@christianbaya3129 Жыл бұрын

@@henryisrad I am planning on keeping the resonators. It’s getting installed in two days but I’ll keep ya posted. I’m just hopping that it has that deep idle growl that I’ve been hearing

@henryisrad Жыл бұрын

@@christianbaya3129 I was going to say definitely keep the resonators. I keep it in regular mode most of the time... Saving sport mode for special occasions and when I know I'm going to be driving aggressively. There's definitely a difference in the sound and I think it's a nice contrast. You're going to dig it man!

@cwells1379 3 жыл бұрын

I got a deal on the mufflers on Amazon. The muffler ship dicked me tho. $150 per pipe. I didnt even ask the price before so I just paid it, fk it. So about $360 total after tax. Still love it! Sounds 👌. Thanks for the advice.

@jimhoffman8571 5 ай бұрын

Can you post a photo of the inside of the stock muffler looking through it, or a cut away view?

@alyssadraculesti Жыл бұрын

I have a Corsa cat back but thinking of taking the mids out and just keeping the Corsa rear resonators.

@roballan4736 4 жыл бұрын

Hi I just did dynomax 24250 to my challenger scat pack. When I try to be aggressive feel like lost power or lost something. Can anyone tell me what’s going on and how to fix it. Does it matter how you install it which one is the back and front.

@johnanglero6032 5 ай бұрын

I'm deciding between the race bullets or the Vibrant 1794's

@Murphys_Law9 2 жыл бұрын

what is the difference with the different numbers for the dynomax

@royorozco7883 Жыл бұрын

It's sounds BadAss bro does it have the same affect sound on a v6

@theonlinecrunch7874 2 жыл бұрын

I just ordered these and replaced the mid mufflers…it sounds the same.. I have a 2016 Standard Challenger. Now I’m removing the cat 🐈 cuz I need some sound. Idk why it sounds the same?

@TheAlexispadron 11 ай бұрын

I did a muffler and resonator delete is the bullets still advised? I feel like it’s louder than where I want it to be

@IcarusTECH 3 жыл бұрын

Sounds good! I wonder how big a change this would be on my 300C with the bigger rear resonators?

@IcarusTECH 3 жыл бұрын

Would a bigger bullet/race muffler make it a little quieter? Thanks!

@gorillaloc1008 4 жыл бұрын

I have a 2013 RT classic do you think they’ll have to cut down on them ?

@anthonymillien74 2 жыл бұрын

I have a mid muffler delete on my 2020 challenger RT, now is it louder and has a deeper tone than the mmd? Because that is what I am looking for.

@canadadotca 9 ай бұрын

Why did choose this model? Why the mini muffler not the regular size?

@TimScottDT 6 ай бұрын

If anyone could help me out, any tips or information would be greatly appreciated!! Thansk!! I have a 2011 challenger Rt 5.7 v8 Hemi it's an automatic though 😕 and has Ecomode on it, would putting these bullets be good for that? Also mine doesn't have rear resonators, idk if it came like that or the previous owner took them off, but there not there, and has dual black quad tips

@juanjrmendiola8412 Жыл бұрын

Will the combination of these with an x pipe and Roush axel back sound good?

@daydream2818 2 жыл бұрын

Wt direction did they weld them ? Long side to the front?

@Sauve- Жыл бұрын

What all do I need to buy for this set up I have a 2022 challenger

@nealfamilydays3536 3 ай бұрын

@SchwayZ will I be able to add this mod to my GT Challenger????

@NicholasCostas 2 жыл бұрын

Will this sound just as good on a 5.7L with the big CAI and Shaker hood?

@Sky1 3 жыл бұрын

I finally go it done SchwayZ_! The reason I was hesitant is that a lot of people record their before and after with smart phones. The phones do not pick up the low frequencies and have an Automatic Gain Control so the Bullets do not sound much louder and only raspy on many videos. After hearing them in person I got mine put on. I have MFERs holding the baffles open as well. I have some before/after clips done with a GoPro H7 where if listening through PC Speakers with Subwoofer is a pretty accurate representation of the change (but lower volume for both). People need to hear them in person. They are not only louder but deeper sounding than the stock mufflers.

@SchwayZ 3 жыл бұрын

Yep for sure man. A camera doesn't do it justice. I use a professional camera in my newer Dynomax video but it still doesn't convey the sound. Glad you like them!

@royorozco7883 Жыл бұрын

Have a SXT v6 will it have the strong sound still

@michaelrichey9156 4 жыл бұрын

I had a mid muffler delete on my charger 392 and went to this afterwards and the only regret I have is I should of put the mini bullets on first highly advise anyone on the fence do the mini race bullets the sound is so much better than a mid muffler delete.

@Taylor-dt2wd 4 жыл бұрын

Define better? Louder?

@JL-rx7ou 2 жыл бұрын

I’m definitely this spring or summer doing a mid muffler delete on my new challenger TA392 widebody. But idk which ones to go with I’ve heard neither in person, It’s between these or the a vibrant 1794’s. Has anyone heard both in person and can give a comparison?

@mpsangha 4 жыл бұрын

What exhaust tips do you have on there?

@failureface1837 2 жыл бұрын

What’s the difference betweeen the 24250 and 24251?

@arnie1569 2 жыл бұрын

Does anyone know the difference between the Dynomax 24251 And the 24250?

@lagerbeer1974 2 жыл бұрын

I ordered these on Amazon for my brand new 21 Challenger scat with 6 spd manual. Not gonna lie, I'm having second thoughts. Feels like I'm doing this too soon. My stock sounds amazing. Just wanted to add a little volume too it. Feels like these might be too much. Oh well didn't cost me but 43 bucks. Not saying I'm not gonna install them. Just saying I'm nervous about losing that amazing tone on my stock. Not a fan of how yours sounded idling.

@threehemis5566 3 жыл бұрын

That does sound good and price is right, that's the route i'll go on my SRT8. Any plans for the Hellcat's exhaust?

@SchwayZ 3 жыл бұрын

I'd definitely recommend it! Good question, so I plan to upgrade the exhaust on the Hellcat but thinking of trying something different. I loved the dynomax but for the sake of trying something different I want to look at other options.

@buzzz6.4 3 жыл бұрын

awesome sound! so you replaced the rear resonators with these or the mids?

@SchwayZ 3 жыл бұрын

Just the mid mufflers. Left the resonators alone

@mydreamsnow4135 3 жыл бұрын

The exhaust sounds fantastic. I actually installed glasspaks and did a =n end muffle delete and i love the deep sound I'm getting on my SXT. Would you please tell me the tire set up you have going on your car? The rear look larger than the front and I want to do something similar. Thx for all you're doing out there!! Dave

@SchwayZ 3 жыл бұрын

Awesome man! So I've got 315s in the back and 275s in the front. They are riding on stock ScatPack wheels. It's not recommended to go that wide on stock wheels but I never had issues

@mydreamsnow4135 3 жыл бұрын

@@SchwayZ thanks dude!! I’m gonna have to go shopping for some staged wheels and then I’m using Michelin CrossClimate2 all around.

@Love_Trucky Жыл бұрын

does it really sound good on v6 .. i m planning to do the same on my sxt??

@TheTajdaman15 Жыл бұрын

what was the pipe size?

@Zo_Lifts Жыл бұрын

Sound good on a 2017 rt?

@neano62 Жыл бұрын

Anybody have a engine check light come on after installing these bullets …?

@twinrivers6200 3 жыл бұрын

Deep fucking growl man love it...did the same to my scat charger.

@SchwayZ 3 жыл бұрын

Awesome! Yeah it's such an awesome product!

@Magnus055 2 жыл бұрын

Great video thanks

@samanosukeakechi4388 2 жыл бұрын

This sounds awesome, Im thinking about doing something to my T/A exhaust. Start off with mid delete or some outlaws leaving the resonators also.. but these sound good too. Think outlaws will be more loud? Like too much? Know any differences between the scatpack and t/a exhausts?

@SchwayZ 2 жыл бұрын

The ScatPack and T/A exhaust should be the same as long as we are talking the 6.4L Hemi. I haven't heard about the outlaws. I will say these sound fantastic on the ScatPack so I imagine they'll sound the same on the T/A

@samanosukeakechi4388 2 жыл бұрын

@@SchwayZ Awesome, I'll have to order me a pair soon... but I got impatient, so I'm just getting my mids cut off right now 😆 lets see how I'll like plain mid delete. Possibly I'll get something else installed too.

@niya430 4 жыл бұрын

I was wondering if anyone has did 4 I have 2 and was thinking about doing that

@geeksauthority 2 жыл бұрын

Hey Schwayz, you are the ultimate Dodge challenger YT channel I guess.. whatever I look it's there :) One question : 0-10 , assuming stock being '4', how much loud is this one? When my stock 2021 V8 when I press pedal, I hear pops (and I love it), does it also do the same? Any other mods to get more pop sounds you may came across? Is there any other Race bullets (other brands) you came across performed better than this? I know many questions but I hope you will reply to all of it. TIA. (Note: Inspiration from your video, I did Mopar hood pins and it came out great- thank you.)

@SchwayZ 2 жыл бұрын

Hey man so I would say it increases it to about a 6 and maybe a 7 at wide open throttle. You definitely still get the pops. If you want the pops louder I'd say do a muffler delete but then it brings the loudness up to a 9 or 10. As for other other muffler's theres quite a few (glasspack, cherry bomb, magnaflow, vibrant) but I'm not as familiar with them. I've heard the glasspack and they sound really good too

@geeksauthority 2 жыл бұрын

@@SchwayZ Thank you so much , let me check other options as well :) Have a great day and thanks again.

@niya430 4 жыл бұрын

It gets even louder when you put it on manual oh my GOODNESS

@rockyjones176 4 жыл бұрын

I got manual sounds awesome. Haven't lifted the car to look exactly yet. Just bought and not sure what all has been done exactly by the original owner. I looked under and good sold wields. But I know there is no result and muffler.

@p71josh 3 жыл бұрын

Great vid man. I have the slightly longer dynomax bullets #24222 sitting in the garage waiting to go onto my charger scat. How is 4 cyl. Mode with these? Same as stock?

@SchwayZ 3 жыл бұрын

Awesome man! So I never noticed a huge drone with the 4 cylinder mode. Maybe it was a tad bit dronier than stock but not very noticeable. Definitely still worth it!

@p71josh 3 жыл бұрын

@@SchwayZ thanks for the reply, I’m going to definitely put these on!

@SchwayZ 3 жыл бұрын

@@p71josh do it man! You'll love it!

@gabedavis890 4 жыл бұрын

@SchwayZ_ Are you in Salt Lake City? I’ve just noticed that’s where it looks like since I live there. We should meet up I have a 2011 rt classic

@SchwayZ 4 жыл бұрын

Yeah man we will have to go to some car meets. Since you got a challenger, are you a part of salt city Mopars?

@Sky1 3 жыл бұрын

I found this video very helpful. I want to put quad tips on but I don't know if there will be enough room to put them on with the stock rear resonators. I am thinking on another set for the tail end and mount the quad tips to them. has anyone tried that? I was also considering Flowmaster Super 10's in the middle with the Race Bullets at the rear with Quad tips attached. My last Challenger (5.7) I went with Flowmaster Super 44s with 3" pipes to quad tips, no rear resonators. It had that Flowmaster growl (got a lot of compliments) but I lost low end tones.

@SchwayZ 3 жыл бұрын

Awesome! I think I've seen people put quad tips with the stock resonators before

@budlybeerburgler8083 4 жыл бұрын

On the fence no more i am. Ty sir.

@danielthomas2557 3 жыл бұрын

Great vid! How long do the additional pipes have to be? 2.75" wide I assume?

@SchwayZ 3 жыл бұрын

Thanks for watching! Yeah so for my hellcat I actually ended up getting an adaptor from 2.75 to 3 inches on Amazon which was used to attach the existing pipe with the race bullets. If you go to a muffler shop they should have extra pipe for that

@danielthomas2557 3 жыл бұрын

@@SchwayZ Awesome, thanks! If you have a link for that would be much appreciated - ain’t too many muffler shops here in Germany 🙈 I ordered the Dynomax already today, and I‘m planning to have them installed at my local garage.

@SchwayZ 3 жыл бұрын

Oh awesome! Makes sense. So here is the adaptor I purchased www.amazon.com/dp/B07G95999F/ref=cm_sw_r_cp_apa_glt_fabc_MFNN6HYA7AZV3DP4CKX0?_encoding=UTF8&psc=1 And then this is the additional pipe www.amazon.com/dp/B000VKZNG0/ref=cm_sw_r_cp_apa_glt_fabc_HH7JHNVRBSNAXVR8J5CJ?_encoding=UTF8&psc=1

@SchwayZ 3 жыл бұрын

Just keep in mind youll need 4 adaptors since there's 2 for each side. And you may need extra pipe but you could probably get away with just 1

@danielthomas2557 3 жыл бұрын

Awesome, helps a lot! Thanks so much!!

@maximepindi9497 2 жыл бұрын

When you've order then did you have to order 2 of them separately or the 2 boxes came together. Looking forward to put it on. My 2021 Camaro RS I already have Borla atak

@SchwayZ 2 жыл бұрын

I had to order 2 separately. Only 1 comes in a package

@chrisvantuyl5554 4 жыл бұрын

@6:35 is it necessary to remove the whole exhaust like that? I'm wondering in case I decide to get this done at a muffler shop?

@SchwayZ 4 жыл бұрын

Nope it is not necessary however my mechanic wanted to ensure that the weld was done correctly all around the exhaust so that there were no leaks. Depending on the shop you go to they may not remove the exhaust... although it's not very difficult and I would recommend it

@slipknotron1626 4 жыл бұрын

Sounds great, I agree with the making sure the welds are complete on top. Sometimes you hear flapping noises from these delete videos like there is a leak somewhere.

@kountrygaming615 3 жыл бұрын

Ok sorry I don't know much about cars but when people get a mid muffler delete. Do you need to buy some extra part or something? If that makes since. I saw a guy on yt he got a mid muffler delete and he switched his resonator with the mini bullets.

@SchwayZ 3 жыл бұрын

No reason to be sorry man. We are all learning these things at some point or another. So you can swap the resonators or the mufflers with the Dynomax race bullets. You may need to get some extra exhaust pipe at your auto parts store because the dynomaxes are probably going to be shorter than the mufflers or resonators. I actually made a video about everything you need to know about exhausts kzfaq.info/get/bejne/na-UeJxnqdPNmH0.html

@Woo60 8 ай бұрын

I know this is a old video but bro does these give u the pop? When getting off the gas?

@SchwayZ 8 ай бұрын

I'd say it amplified the pops that I would get on the stock exhaust. It's not crazy strong pops but you can hear them

@FaZeBen92 3 жыл бұрын

I agree

@CCW-wg8ds 3 жыл бұрын

Does it make a difference with the active exhaust system like from sport mode to track mode

@SchwayZ 3 жыл бұрын

So I ran some tests with sport mode and regular mode in the video but I couldn't really tell a big difference. It's not as big as difference as with the regular mufflers

@dundar198 3 жыл бұрын

Does CEL comes on after installation? Im thinking of putting this on my widebody charger hellcat

@SchwayZ 3 жыл бұрын

No, it doesn't trigger any lights or void anything

@Uikube 4 жыл бұрын

Will this make your car pop an engine code? Thanks!

@SchwayZ 4 жыл бұрын

Nope the muffler won't affect any engine codes or emissions

@koolkat123 3 жыл бұрын

Did you have to go get that extra pipe yourself or do you think any shop would have some on hand?

@SchwayZ 3 жыл бұрын

I went and got it myself at autozone but if you're taking it to an exhaust shop they should have extra pipe. I would just check with them before you go

@karlaelena3137 2 жыл бұрын

What size pipe?

@greenhornetkato4837 3 жыл бұрын

So i might as well not try to do it on my 3.6 sxt Challenger, probably won't give it a throaty sound, cause it's not the r/t or scat pack?

@SchwayZ 3 жыл бұрын

It's up to you. I haven't heard the dynomaxes on a V6 but it should still improve the sound compared to stock

@Love_Trucky Жыл бұрын

bro have u done it on v6 if yes hows it??

@isaelgarcia2105 4 жыл бұрын

Would the dynomax bullets sound similar on a 2009 Dodge Charger 3.5 V6?

@PellySideCustoms 4 жыл бұрын

Isael Garcia no

@icoolum1 4 жыл бұрын

Daniel Vasquez you have a v6 half the size of that big Hemi. However, I did have a Chrysler 300 with that motor. Leave your mufflers alone and have your shop remove the resos at the back. It won’t sound like a V8 but it will have a nice sporty sound you’ll like

@t694rt6 4 жыл бұрын

I literally just got these today are they directional how do you know which is the inlet side thanks

@SchwayZ 4 жыл бұрын

I believe they are the same on both sides but I'd let your mechanic confirm

@t694rt6 4 жыл бұрын

@@SchwayZ ok thanks

@btkiller11111 4 жыл бұрын

dont sound too much different to me but im thinking dynomax with magnaflow axleback will sound great

@SchwayZ 4 жыл бұрын

Yeah the camera doesn't do it justice

@twinrivers6200 3 жыл бұрын

Trust and believe I have the same setup.. as he said camera does it no justice

@sankhadas6674 4 жыл бұрын

Awesome.🤘🤘🤘🤘

@luisperez3885 3 жыл бұрын

What exhaust set up did you have before the bullets

@SchwayZ 3 жыл бұрын

Just the stock setup

@MrSal319 4 жыл бұрын

Do you still get good crackles and pops?

@SchwayZ 4 жыл бұрын

Yep! They are actually louder now

@Demonjr.1320 4 жыл бұрын

If you have a 2019 you can remove actuator motors and remove springs then wire tie flaps open and reinstall motors and get no codes and it’s way louder. No need to spend money on mffers

@MeechIsGodly 4 жыл бұрын

DEMON JR 1320 only on the 19?

@coop4274 4 жыл бұрын

Trey Meech no on 2015 and newer.

@omikurita Жыл бұрын

The additional pipe what’s the diameter size used?

@SchwayZ Жыл бұрын

I'd ask your muffler shop but either 2.75 inch or 3 inch should work

@Love_Trucky Жыл бұрын

do u recommend to do it on v6 sxt😅??

@Wyatt_Pauer 11 ай бұрын

kzfaq.info/get/bejne/b89lfNyDts-uj6c.html This video shows it being done.

@BIGCALIBEAR7 Жыл бұрын

What size is the additional pipe that is required?

@SchwayZ Жыл бұрын

Depends on which vehicle you have. On the scatpack its a 2.75" exhaust so you can get that size of pipe or get a 3" to slide into and weld around. I'd consult with your installer to see what they would prefer

@fearnfaith6721 3 жыл бұрын

Sounds exactly that same as a mid muffler.

@julyfishy392 3 жыл бұрын

On the idle maybe. The race bullets are known for its snap and crack

@pacocountcontessa3719 4 жыл бұрын

You need to put this on a 2011-2016 Chrysler Town & Country. I’d like to hear that 3.6L V6 VVT roar

@SchwayZ 4 жыл бұрын

😂😂😂

@badboyxx99 2 жыл бұрын

It’s been decades I seen a Utah license plate

@Omsk-vq8me 3 жыл бұрын

Does it fit for any car or just challenger

@SchwayZ 3 жыл бұрын

You can put it on most cars

@StephIsColdG 4 жыл бұрын

I’m lost.. I just got my scat pack 2019. Can you give me step by step what I need to do to make it louder? Lol thanks

@CraigOgamus 4 жыл бұрын

StephIsCold get the mid mufflers deleted its $80-100 step 1 go to muffler shop. Step 2 tell them you want mid muffler delete. Step 3 drive away and you’ll be smiling about how cool ur shit sounds.

@hairychesticles1 4 жыл бұрын

Dont delet the mufflers. just replace them with the dynomax race bullets. Its plenty loud and doesnt give you a drone. I also have a vid doing a pull showing how loud it is

@jennifertrevino8004 3 жыл бұрын

@@hairychesticles1 can you post a link which ones that will fit my v6 sxt dodge challenger 2016. I'm debating on replacing the muffler with either these or flowmaster 10s, if you can post a link where to purchase these I'll get these I love love love the sound sounds deep not pricey raspy sounds mean too but not too loud. I plan keeping res on and not deleting anything.

@hairychesticles1 3 жыл бұрын

@@jennifertrevino8004 yea i kept my resonators. Im not sure what one will go on the v6 i will have to look. I think mine were 3inch but an exhaust shop should be able to go up in size. The number for mine was 24250 and they are on jegs for like $20. I would ask a local shop if they can fit them to your exhaust. I have seen race bullet put on all sorts of vehicles and i think even v6 mustangs and challengers. Im sure somone has made a video on it. I think part number 24215 is a 2.5inch version from what i found on advanced auto

@hairychesticles1 3 жыл бұрын

@@jennifertrevino8004 this one has it kzfaq.info/get/bejne/b89lfNyDts-uj6c.html i think 2.5inch is the smallest you can get. Mine are the 3inch ones but i have a different engine in my challenger