DODGE JOURNEY CAMSHAFT POSITION SENSOR REPLACEMENT BANK 1 BANK 2 3.6 V6 FIAT FREEMONT PENTASTAR

No video

DODGE JOURNEY CAMSHAFT POSITION SENSOR REPLACEMENT BANK 1 BANK 2 3.6 V6 FIAT FREEMONT PENTASTAR

Рет қаралды 138,076

Күн бұрын

DODGE JOURNEY CAMSHAFT POSITION SENSOR REPLACEMENT BANK 1 BANK 2 3.6 V6 FIAT FREEMONT PENTASTAR
► Camshaft Position Sensor: amzn.to/2TPCVAK
If you need to replace camshaft position sensor bank 1 or bank 2 this is the right video for you. We will show you how to replace and where it is located the camshaft position sensor bank 1 and camshaft position sensor bank 2 on Dodge Journey. The rest of the world Dodge Journey is known as Fiat Freemont so the procedure to replace the camshaft position sensor on Fiat Freemont will be the same for the 3.6 v6 engine. We demonstrated on a 2012 Dodge Journey 3.6 V6 Engine.
This video might be helpful on:
2009 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2010 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2011 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2012 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2013 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2014 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2015 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2016 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2017 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2018 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2019 Dodge Journey Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2012 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2013 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2014 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2015 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2016 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2017 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2018 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
2019 Fiat Freemont Camshaft Position Sensor Bank 1 Bank 2 Replacement Removal 3.6
PRODUCTS USED IN THE VIDEO:
► Panel Removal Tools: amzn.to/2tfiEZD
► Screwdriver Set: amzn.to/2tbcI3W
► Tool Set: amzn.to/2TCHRca
► Plastic Clips: amzn.to/2UZUuOW
► Makita Impact: amzn.to/2DXXQfs
► Our Website: mechaniclifesty...
► Our Baby Girl Channel: goo.gl/WiVs8Y
► Our Second Car Channel: goo.gl/XB6fHq
► Honest Product Review Channel: goo.gl/sMPQXk
► GoFundMe Link: goo.gl/pUife3
Our Most Popular Videos:
► Bumper Repair: goo.gl/XBe4Sh
► Missing Wheel Lock: goo.gl/5n4a5i
► Bearing Replacement: goo.gl/JSNDnZ
► Restore Headlights: goo.gl/qVhDkf
♦♦♦ Cameras & Gear Used For This Video ♦♦♦
•Cameras
Panasonic Lumix FZ300: amzn.to/2BNWtNA
•Tripod
Polaroid 72-inch: amzn.to/2iVTmP4
•Microphone
Polaroid Pro Video Condenser: amzn.to/2krpSsA
•Light
NEEWER 160 LED CN-160 Dimmable: amzn.to/2jjg9Bd
•Comuter for editting
Lenovo ideapad 310: amzn.to/2kqUNFl
♦♦♦ Other Equipment and Gear that I use ♦♦♦
•Camera
Sony HD Video Recording HDRCX405: amzn.to/2jk8nqB
•GoPro HERO5 Black: amzn.to/2ktNKfj
•Extra Computer For Editting
Lenovo Ideapad 510: amzn.to/2ktOuB7
► Like Us on FACEBOOK: / worldmechanicsofficial...
► LIKE & SUBSCRIBE for MORE DIY VIDEOS that could SAVE YOU BIG $$$$$$$ !!!
This is not a sponsored video. Everything is purchased by us!
The video is meant for entertainment purposes only. Do not Attempt!
AMAZON ASSOCIATES DISCLOSURE
Auto Repair Guys is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com
*Disclaimer
We, Auto Repair Guys, are not responsible for property damage or injury incurred as a result of any of the information contained in this video. Information given in this video does not guarantee the desired outcome. Any injury, damage or loss that may result from improper use of the tools, equipment, or the information contained in this video is the sole responsibility of the user and not Auto Repair Guys.

Пікірлер: 49

@AutoRepairGuys 5 жыл бұрын

⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: kzfaq.info ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys

@gregfinney9035 2 жыл бұрын

The is a great video, but I have a few suggestions to make the job easier and faster. 1. Don't remove the round air-box, just push it back against the firewall out of the way. 2. Don't remove the throttle-body since the intake comes out easily with it installed. 3. Don't remove the front brackets because it is not required, and they are alignment guides for installing the intake later.

@timfortin123 3 жыл бұрын

You guys have saved me so much money working on my wifes dodge journey!!! thank you!!!

@thebeardedairgunner Ай бұрын

Gonna be my project today! Thanks for posting this!

@josephu8327 3 жыл бұрын

You did a superb job of showing all the small details!

@DerrickGebhard 5 ай бұрын

Ya'll rock! Thank you very much for this video. Showed every part, made it easy to follow along, replaced both camshafts tonight, and spark plugs since I was in there, and this video came in clutch. Thank you!

@JEL2011able 4 жыл бұрын

Great walk through! Thanks for taking the time to demonstrate camshaft position sensor removal.

@originalcuscatlan8322 Жыл бұрын

Yes please I could use your help. Was driving my 2010 Dodge journey I just purchased one month ago used. Was driving good no issues. But suddenly I was driving check engine light came on and car started shutting down will not crank back on had to have it towed. The person who hooked it up to a diagnostic told me he replace a camshaft sensor the one by the alternator. Journey is still not

@poloodl5272 28 күн бұрын

Does the crankshaft and camshaft sensor run off each other?

@nicholasrose1498 Ай бұрын

Thank you guy for your video anyone have an easy way to replace the camshaft gasket that in the valve cover. Thanks in advance anyone

@travisrodriguez4790 Жыл бұрын

Why is there no search button on your main channel. I'm looking for camshaft sensors replacement for a 2011 dodge journey 3.6 vvt

@henryphilon2717 3 жыл бұрын

Love you guys almost as much as I live my Journey. My emergency brake cable broke at the panel. Do you have a video to replace this part of the brake cable?

@flipnblips6418 4 жыл бұрын

How many and where are the camshaft position sensors on a 2010 Dodge Journey sxt 3.5L V6?

@kyleemourer3497 Жыл бұрын

I need to see a video for the other sensor do you have one?

@celestinewilliams1069 3 жыл бұрын

Hello, I have a 4 cylinder 2012. How many goes in mines

@celiaorozco 2 жыл бұрын

Hello, I have a 2014 Dodge Journey and the traction control comes up as soon as the engine light turns only when it’s really hot outside while I run it in the highway it’s fine while I run it in town even it’s it’s hot out. Camshaft sensor was replaced that’s what the computer indicated but once I run the car engine light turns on as well as the traction control.

@christopherrasmussen8718 Жыл бұрын

Same in my 2016 Promster what a pain

@kaleighstewart8117 2 жыл бұрын

Do you have a video of how to change a transmission solenoid on a 2010 dodge journey sxt?

@enriqueguerraiii5359 4 жыл бұрын

Where is the crankshaft position sensor

@LubaLuba1 4 жыл бұрын

So bank 1 towards the back and bank2 is towards front the same on Town and Country or Routan right?

@steedm1093 4 жыл бұрын

Bank 1 is whichever side of engine that has cyl 1. If your pulleys are on the left if looking at your engine from the front its in the back under the firewall. Bank 2 is towards radiator.

@nathanielphillips5691 5 жыл бұрын

I wish my engine looked like this I have Dodge Journey 2010 3.5

@FouseStar 2 жыл бұрын

That round air box is the absolute bane of my existence right about now! I’ve done this once before to change out spark plugs and ignition coils and it was the hardest part for me then too. How the hell do you get that thing back on correctly? How the hell did I get it the first time around? 🤣

@JEL2011able 5 жыл бұрын

which one is bank one and which one is bank two? is the closest one to the front of the vehicle bank 1 or 2?

@c.p.5741 10 ай бұрын

Bank 2 is in the front. Bank 1 is near the back by windshield.

@billtrent7402 4 жыл бұрын

i need to know how to replace camshaft and rocker arms i have a P306 code that is not the coil,plug or fuel injector. dealer said the cam or valve train is the problem. Thank you

@miguelrios5755 Жыл бұрын

16:30 is when he pulls bank2 camshaft position sensor

@osirisfornever9127 2 жыл бұрын

So 2012 dodge avenger is the same motor?

@NGSPC4Life 3 жыл бұрын

does this apply to the durango engine 2016 3.7????

@snodgrass00001 3 жыл бұрын

Thank you for this video 😊

@frankesobedo5135 Жыл бұрын

Where is the video showing crankshaft sensor

@Ethan-ms9th 4 жыл бұрын

Hi I’m having problems with my town and country can you help?

@rootedandwildtribe 2 жыл бұрын

Should I be disconnecting the battery before attempting this?

@RickPreciado Жыл бұрын

yes

@rootedandwildtribe Жыл бұрын

I did back when I attempted and I fixed it myself 😊 so grateful for KZfaq!

@vasiliostsakanikas6457 4 жыл бұрын

hello, for a 2015 dodge grand caravan the camshaft and traction sensor lights go on toether and it eliminates my overdrive. no power . what can i do. i changed the camshaft sensor already

@omarmufid783 2 жыл бұрын

Hello did you found the problem

@wendelldavisonjr1131 2 жыл бұрын

I replaced my sensor but I’m still getting code P0018. Any suggestions??

@Jmusiquex 3 жыл бұрын

Could you tell me where the crankshaft/ camshaft sensors are on a 2011 Jeep Grand Cherokee

@sealedsecure3754 Жыл бұрын

Crank shaft pls

@user-ik9oe3lm9q Жыл бұрын

Changed bank one cam sensor and still comes up with a code

@1Prolific 5 ай бұрын

Hey I’m having the same issues replaced both and and b codes pop back up

@dougiefain7688 4 жыл бұрын

Ok I changed both sensors and I’m still getting the p0340 code for bank 1 sensor 1 on my 2011 Dodge Journey Express 2.4L what could be the problem now??

@Listen-Remember 5 ай бұрын

how you fix?