Dodge Ram 1500 5.7L Hemi ProCharger Install - Stacey David's Gearz S11 E9

Рет қаралды 234,076

Күн бұрын

Everyone needs a little boost here and there. For some people, coffee does the trick. But here in the GearZ Garage we take our boost seriously. And we like ours packing 160 HP. Hang on to your seat as Stacey adds a bolt on Supercharger to a Ram 1500 breathes a little excitement into a daily driver. And speaking of things going on in the garage, you’ll definitely want to stick around as Stacey talks shop with the guys at Rebuilding Generations. Learn all about how this mentoring program is teaching the next generation about working on cars and sharing plenty of life lessons.

Пікірлер: 154

@komaboi19 4 жыл бұрын

With all of that added to the RAM, one with sense would think a start up and quick drive on video is surely in the video...

@mickparsons4894 3 жыл бұрын

@skinlab4239 3 жыл бұрын

Can't show the inferior dodge junk blow up.

@Chives1797 3 жыл бұрын

Oofenheimer

@mikekosar6135 3 жыл бұрын

Really 😒

@mikepoint4983 5 жыл бұрын

Man I’m happy I subscribed I used to watch this show all the time until my cable network didn’t offer it anymore . Thanks for sharing 👍🏼

@bmstylee 5 жыл бұрын

These older seasons are pretty good. The newer ones are downright unwatchable. 3 minutes of tech if your lucky, 7 minutes of TV commercials and 20 minutes of Cornwell and e3 and other company infomercials.

@jasongillette8680 5 жыл бұрын

This show used to be a regular part of every weekend for me.. even way back before and during the copperhead build I've been hooked.. Stacey is awesome. His wealth of knowledge makes every project achieveable and we'll explained. And it's always done right.. I'm so glad I found him again..binge watching can now begin..

@Intimidator82 5 жыл бұрын

Thats great getting the kids involved in this kind of work. There is no doubt its a dying art/hobby. Love this show!!

@ToAstYNaChO 5 жыл бұрын

I disagree. Im 23 and auto techs are so incredibly common among my age bracket, its what steered me away from the profession.

@Vincent-ke5zn Жыл бұрын

You're amazing to watch because you make every job look almost effortless and easy

@1STGeneral 5 жыл бұрын

Most people spend what time they have watching these shows and not wrenching

@Marfoir0303 4 жыл бұрын

You’re right I’m an aircraft mechanic for Cal Fire & I turn wrenches 8-10 hours a day 6 days a week. On my rare time off I don’t like to turn wrenches unless necessary. I watch this show and dream 😎

@shinymud7 3 жыл бұрын

Love the working with the kids

@Vincent-ke5zn Жыл бұрын

Great job on the dune cat. Congratulations boys

@meadmaker4525 4 жыл бұрын

Interesting episode, and I'd love to do something like that to my truck ( I have almost the exact same one ), but there's NOTHING about this that's cheap and easy. Also, although the truck is paid off, it's not worthless, and I'd be concerned about putting that much extra HP through an otherwise stock setup. Adding more power is fun and all, but not if it blows your engine, transmission, diffs, etc. More information about this kind of thing would have been better than the superfluous stuff that took up the entire 2nd half of the episode. We didn't even get to see the headers put on or hear the truck run once it was all done.

@zachtheripper124 4 жыл бұрын

As long as you dont put too much boost through the motor, stock internals will be fine. People push it and want more and more power and amp up the boost and break the rules and they blow the engine. Same thing with nos. Stay withing thenrules and you will be fine. I love My Ram Hemi I've boosted her with stock internals and stay in low range boost and she runs great.

@davesmith9656 5 жыл бұрын

I use to watch you every weekend on cable tv

@tz6865 5 жыл бұрын

Um 7yrs old and paid for! Dang I still haven't bought one yet!

@mytubebobbie06h 3 жыл бұрын

This is literally the best channel I have come across because not only is entertaining, but educational, inspiring and the reason why I want to start a project. Thank you for such great content. Keep doing a great job @ GearNation and all you Gearheads on this channel. God bless!

@skinlab4239 3 жыл бұрын

Back in the day we had books IF you could find one. Now kids have everything with the internet to learn. Only thing they need is tools.

@marcaliventialiventi765 4 жыл бұрын

You forgot one problem, Our wives. The minute any guy wants to play with his toys, SHE gets involved and nothing gets finished

@inboundlight7732 4 жыл бұрын

Marc Aliventi Aliventi you picked the wrong wife.

@jm1551701 4 жыл бұрын

Got that right! I'm still hunting for a 66 Malibu to restore, and when my Wife looks at what I am looking for specially on E bay, she's say's "OH that's nice honey maybe someday, I don't think so!

@paulw1059 4 жыл бұрын

Why did you marry her then? Either you're a man child, or you enjoy being told what you can and can't do. Sounds like a sad marraige

@marcaliventialiventi765 4 жыл бұрын

@@paulw1059 she changed after our oldest daughter committed suicide

@kalijasin 4 жыл бұрын

@Marc Aliventi Aliventi, Lol 😂

@TchallaAnderson 4 жыл бұрын

Teach them while they are young .. That's great 👍 future car guys like me

@prior8t2000 5 жыл бұрын

My 99 5.9 Magnum needs one of these.. Plus, I can use those Headers.. Do I jus need to bring my Van over to your place and for a couple of hours or so then..??.. I'm absolutely interested in the set-up.. Please let me know...

@DJCT1000 5 жыл бұрын

what did you do with the adjustable Air gates that cover the radiator?

@quazimotoscopick7085 4 жыл бұрын

Nice work on the Ram Hopefully i can do all that to my 2013 bighorn Gonna cost alot no doubt But jut shy of 600 hp Holy cow!!

@BoostedRam 4 жыл бұрын

My 2015 ram 5.7 sport is lacking this procharger; been debating getting it cammed or sc.

@TheJohn4231 4 жыл бұрын

At 4:04 what is left on the end of the crank after the pulley comes off?

@Edgar-Friendly 5 жыл бұрын

Shop needs to come back to high schools. AI is going to replace a lot of white collar jobs but people are still going to need physical labor done.

@Steeltoe87 5 жыл бұрын

where's your video when you leveled that truck?

@kalijasin 4 жыл бұрын

It take me 1 month to do all that and I’d have to consult a mechanic buddy of mine to help me fix everything I screw up. 🙈

@Ma_Deuce 3 жыл бұрын

Not doing anything with the transmission or gapping your rings? I wonder how long that will last

@osamamostafa3597 4 жыл бұрын

i hope one day i can travel to learning all things about cars and trucks from you guys , guys here in my country not good enough to teaching that amazing skills which you have out there . i planing to opening a big project to build rebuild and fixes cars & trucks here in my country egypt we need to bring those wonderful skills here but first i need to study every things from guys like you >>> any recommendations ? with my respect .

@isokorny-3708 4 жыл бұрын

Where is the payoff on the ram? I wanna see the results of the build with the headers exhaust and pro charger

@josephball4245 4 жыл бұрын

When are we going to see more videos on the z28 Camaro??

@shinymud7 4 жыл бұрын

Do you really need a cooling airbox with a procharger? Thank you.

@frontlinedolla1815 4 жыл бұрын

You my favorite person in the world

@Akartavor 5 жыл бұрын

Well, could I do it? Am pretty sure I could. However, it’s certainly not just a bolt on when you have to drill your crank.

@cliffcampbell8827 5 жыл бұрын

I hate having to work on exhaust.

@waugy370z8 4 жыл бұрын

What about the transmission? Thats a pretty big jump in hp (160) to just ignore the transmission. Im not knocking the install im just saying usually with that much of a gain a torque converter is usually upgraded for a start.

@wilheimreis8272 4 жыл бұрын

drill the crank,ill definitely screw that up.lol😕

@007Knightjp 2 жыл бұрын

The one thing that I want to know about this kit is whether it will mess up my MDS. I kind of want to retain that.

@bmstylee Жыл бұрын

Generally you lose the mds system.

@toddriesland3858 3 жыл бұрын

Is there a super charger for a ram 2500 V10 ?

@ricardoallende2597 5 жыл бұрын

Why didn’t throw all those old parts on the floor like usual?

@doortek5348 4 жыл бұрын

160 HP gain is a stretch for about $7,500, while that pushrod 5.7 is 390HP at the crank.... but about 300 at the wheels.

@simmonsdavon Жыл бұрын

You have the option to go higher up to 18

@jamminjammin7115 4 жыл бұрын

stacey david how are you? how available is this kit?

@rockymontana1 5 жыл бұрын

Hi Stacy,can you tell me if pro charger makes a kit for my dodge ram 1500 with the 4.7??? It's a 2002....with 30,123 miles

@ghostrt1608 4 жыл бұрын

@ rockym... Just look on their website or call the company

@abutler0311 Жыл бұрын

Do you not need to gap the piston rings for this?

@simmonsdavon Жыл бұрын

Not if you are going over 8 pounds of boost

@dblake5364 4 жыл бұрын

Wtf ! Why didnt u show starting the dodge ??

@dougchurch9626 4 жыл бұрын

Because you have to have the computer flashed after this! Cheap my $#% around 7000 if not more! If you could tow your to a place to have it computer flashed.

@boteenracing 4 жыл бұрын

It would be great if the was a follow up to tell how the factory 6spd auto puked it's guts with that extra "160 hp"! LOL

@scruffydogdan 4 жыл бұрын

Sad no test drive. Like cutting out last page in a book.

@stevem8128 3 жыл бұрын

Love this channel but what happened to us seeing the net gains? I'm sadly disappointed as I've really been considering doing this to my 5th gen 2019 Ram. Results would have been an awesome ending to this good video.

@BillyMOA 4 жыл бұрын

For an actual install video of the American Thunder FlowMaster cat back, see this video kzfaq.info/get/bejne/eZeYhK-Q3tSsln0.html (Hardcore Henry Style)

@shaftysgaming9857 5 жыл бұрын

Can you put a pro charger on my truck

@williamarden5441 4 жыл бұрын

I always thought if you put a Super Charger, or turbo you have to go one heat range colder on the plugs minimum

@JPitty2011 4 жыл бұрын

I thought so as well

@only1true540 4 жыл бұрын

Hey one question when you put headers on the check engine light will stay on right??

@randomstuff7277 4 жыл бұрын

Not necessarily. If you have long tube headers and you take out your cats and o2 sensors then it will but you should be able to fix it with a tune.

@only1true540 4 жыл бұрын

Randomstuff thanks man for answering my question cuz I hate to drive with check engine light on

@mikepaille7684 6 ай бұрын

I also see there isn't really any answers to anybody's questions that are asked it all sounds good and looks fairly reasonable to do but costs and the building of the project wasn't finished the building went rather much faster than I know that it would take and being rather confusing I believe to most people watching it with a bunch of questions not answered

@steveww07 5 жыл бұрын

stacey check this out david

@amermuscle 5 жыл бұрын

To bad it's on the 6 speed and not the 8

@Andrew-zv4fm 3 жыл бұрын

I like shows like this. 30 minutes and they show you how to do a job for a car or what is needed. The other shows where it is an hour and is them BSing are crap.

@ohraspy8220 5 жыл бұрын

Where can I order this kit? And how about much does it run? Is there any other engine work I need to do first

@chancewindham1718 4 жыл бұрын

what do you drive

@ohraspy8220 4 жыл бұрын

Chance Windham 2012 ram 1500 5.7

@jasonneal 4 жыл бұрын

Who ever owns that truck is a lucky mo fo. All that free stuff for the advertising. Sign me up

@dnwrd34 4 жыл бұрын

Only $6700 at Summit for a Silverado!

@kalijasin 4 жыл бұрын

That’s a rip off.

@TheDirtyBirchTrails 5 жыл бұрын

Damn, did I miss something? Does he take the truck out to test it? Get it on the dyno ? Guess were not special enough ????

@wannabejeeper 4 жыл бұрын

I thought the same thing... would have liked to hear it at least with the headers and cat back.

@peteandrepete528 4 жыл бұрын

Life is just so cruel sometimes isn't it?

@GlorybetoGOD7 9 ай бұрын

Do a WK2 5.7.

@jeffzahnd 4 жыл бұрын

This is much easier than my c6 corvette was 😅

@mikepaille7684 6 ай бұрын

Will this set up work for my 2016 Ram 2500 6.4L

@OfficialStaceyDavid 6 ай бұрын

I haven't tried this setup on a 2500, so I would check with ProCharger.

@joyroc885 4 жыл бұрын

I guess to some people 6700 is cheap. Looks more like a 4k system. There isn't much to the system.

@chadsmith24 4 жыл бұрын

I had a set of those flowtech headers on my 2003 4.7L. Junk. Garbage. Kept cracking around the egr tube. Very thin walled tubing. Never again.

@stevem8128 3 жыл бұрын

Good looking out with this valuable information because I was almost. Sold

@kevsgonefishing 4 жыл бұрын

Is Ca one of the 2 states it isn’t legal in ???

@ronjones-6977 4 жыл бұрын

Do you even need to ask? We can't do shit in this hellhole.

@cottonhill35 3 жыл бұрын

I mean Flowmaster is grabbage, has so much drone but looks like a nice 450 whp build

@TheDynamiteGuy 4 жыл бұрын

"We Gotta Teach"? First "THEY" have to be interested and then "THEY" need to be teachable!

@bobocaterpillar3697 5 жыл бұрын

In the pickup truck job he forgot to mention that with the supercharger, you now have to run 92 OCTANE!!!! so much for a DAILY DRIVER! $$$... ouch

@Geoff_G 5 жыл бұрын

It is a bit pricey that's true ($6.25/USGal or $1.65/ L) but I'd still do it. In a few years when my truck is out of warranty.

@mustanggang3889 5 жыл бұрын

$6.25 a gallon lol?? Wtf we got 93 for $2.95 in ms

@Geoff_G 5 жыл бұрын

Prices have gone up here since I posted. $6.47/USGAL for regular and $6.85/USGAL for mid grade. Highest prices in North America here in Vancouver BC.

@chancewindham1718 4 жыл бұрын

@Mr Sunshines You're an idiot. It's actually dependent on compression ratio and in most applications you should run higher octane to avoid detonation.

@1165slugman 4 жыл бұрын

If concerns are gas prices suggest you get a Honda civic and leave truck at home. My last truck used premium 14 mpg, now my new 2019 gets 22 mpg.

@sonsofliberty3081 4 жыл бұрын

Long tubes with a 6.1l intake from a junkyard would have really gave this a kick in the pants.

@caniwitech 4 жыл бұрын

yeah, those 6.1's are all over the junkyards. are you serious?

@sonsofliberty3081 4 жыл бұрын

@@caniwitech if you want one bad enough I'm sure you could find one. And yes, the eagle (6.1) intake manifold does better than the 392 intake on a 5.7l. Combining that with long tubes gives you a torque quicker and holds it longer. If you look a dyno results you may only gain 15 lb ft overall but you gain 35 to 50 lb ft the whole way to the max torque just from those 2. Basically it levels out your torque curve, it shoots way up at the beginning and then holds the line clear to the max torque instead of an actual curve. Hose power curve is helped but not like the torque. On one guys charger he put a used ebay 392 intake, with cam and tune, and he is dynoing over 400 hp and 430 torque to the ground. That car is faster than a 392 car. The 6.1 intake is better for that car.

@caniwitech 4 жыл бұрын

@@sonsofliberty3081 I never said it wasn;t better, or that it didn't perform better. I just thought you saying simply picking one up from a junk yard a but of oversimplification. If someone was lucky enough to find a wrecked 6.1 in some random junkyard, there is no way the yard would sell just the intake. It would make selling the much more profitable engine much much harder. Most likely, your junkyard 6.1 intake is actually a 2500 buck craiglist intake with a free 6.1 attached to it.

@jonstuart8352 4 жыл бұрын

Everyone. Let's put on 200 more hp and not do anything to thre trans to hold up to it. Lmfao. Wonder how long it'll last

@mweezy 4 жыл бұрын

The pro-charger is only adding 160 hp...lol

@Mr.Safety. 4 жыл бұрын

Just a poor Canadian, I wish I could go to that school

@NeutralOne23 4 жыл бұрын

No test drive?? No dyno?? Man... kinda like: dinner, movie, foreplay...followed by “I gotta go.” 🙄😂

@lawyers9 3 жыл бұрын

What happened to the rest of the story of the Ram supercharger? Went from the Ram to advertising.

@skinlab4239 3 жыл бұрын

A cat back is a horrible way to only exhaust. heads too and at that point redo everything.

@Tx_P71 5 жыл бұрын

I was fixing to say... That's a procharger. Not a supercharger. It's a belt driven turbo. A supercharger has billet triangle style twisted rotor

@greengolftee87 5 жыл бұрын

Procharger is a brand that makes belt driven superchargers. This is a centrifugal supercharger.

@M1A4R8K8 5 жыл бұрын

Centrifugal superchargers are Poor Man's power, nothing beats the sound of a turbo

@1165slugman 4 жыл бұрын

@@M1A4R8K8 Dude all that matters is how it performs. Your probably that annoying twit driving circles in the neighborhood with your cherry bomb mufflers with faux chrome tips. Lol

@OfOld 3 жыл бұрын

"These are emissions legal in 49 states"...thanks California

@Prong2375 5 жыл бұрын

10k Later...

@skinlab4239 3 жыл бұрын

Not all ase certified entities know how to turn a wrench proper.

@wallydevine1129 5 жыл бұрын

Drilled your crank and voided your warranty. Lol!!

@DG-vu2fr 5 жыл бұрын

He said it was a 7 yr old paid off truck in the first few mins of the video. He even said why one would do it. I just got my supercharged Denali tuned for the same reasons.

@idontlikecops1 5 жыл бұрын

Who gives a fuck

@chicagomodzz 3 жыл бұрын

That kit costs $7000 what the fuck? I can almost buy a hellcat crate engine for that much.

@brendanyazzie2774 5 жыл бұрын

shorty headers do nothing for your engine, only long tubes make a difference

@ca-te4se 4 жыл бұрын

Hi me and my son love the show. I'm an old school mechanic. I need some direction on a cam, lifters , pushrods. What type of tuner to get . For my son's first truck a 2004 Ram 1500 5.7 Hemi looking for a fast street truck. Any information anyone has that can help please send any information to jca1962c @gmail.com. thank you guys. Stay safe in

@magicyeti9256 5 жыл бұрын

No fkkn way that hemi is 400whp... Or a 150hp procharger. 350whp is more accurate.

@tramsey5682 5 жыл бұрын

395 crank hp is correct, he said under the hood

@WitchTrials92 5 жыл бұрын

Yeah that Hemi produces 390 horsepower and 401 foot pounds of torque my dad got a 2011 Ram

@magicyeti9256 5 жыл бұрын

Without a dynosheet, I call bullshiiiiit kid.

@shaftysgaming9857 5 жыл бұрын

Its true my Chevy is over 400 stock then I programmed it now I'm almost 450 but the pro charger goes by the size they can go from 100 to 500 go easy but stock Turbos add a 100 or more hp

@TheRamGuy 4 жыл бұрын

Haha. Guess you don't know how engines are rated. The horsepower isn't rated to the wheels rather just the output of the engine with accessories without being hooked to the transmission. So yes if you look at wheel HP those Hemis put out about 325hp.

@andrewburt7900 3 жыл бұрын

I notice they never mention price on anything. This show is for people that have more money than brains

@andrewburt7900 3 жыл бұрын

So I just looked one up on pro chargers website. Kits for that year START at 6,300 and go up from there!! Like I said; This show is made for people that crap money and wipe with 20’s. Those people will just pay someone to install this I don’t know why you have a diy channel that caters to rich people.

@rancedanko 4 жыл бұрын

Blowmaster exhaust what a waste

@jm1551701 4 жыл бұрын

I was an Auto Mechanic for 18 years, before I decided to give it up, and if there is one thing I always noticed when young people started adding on all these bolt aftermarket products the vehicle would all of sudden come down with a bad case of what we used to call "Tinker IDUS " that's right teaker idus, that is a disease a car or truck get when you start adding on all these aftermarket parts, it may work good in beginning but then all of a sudden 6 months maybe a year things start going wrong, engine lights start appearing and you can't figure why, being in the business I have seen it all, and trust me when I say "Tinker IDUS once its in your engine bay it spreads, and then your local Mechanic like me have now figure out what the problem is. so my advice to anyone "LEAVE IT ALONE" if it aint broke don't fix it!!

@fly1ngpapaya 4 жыл бұрын

"Rolls eyes"

@ronjones-6977 4 жыл бұрын

What's 'teaker?' Do you mean 'tinker?'

@jm1551701 4 жыл бұрын

@@ronjones-6977 yes meant Tinker. typo!

@dukesjeepsandtrails8511 5 жыл бұрын

The music makes me feel like I'm watching 70s porn....

@skinlab4239 3 жыл бұрын

You'll never have to worry about a rusty seam again but you're redoing a seam.... Not to logical.

@bmead144 4 жыл бұрын

Either these guys have no clue as to whats "inexpensive" or they are slightly biased or, oh yes-they get this stuff for FREE!

@clayferguson340 4 жыл бұрын

I am a level 3 Heavy Duty Diesel Mechanic in Ohio with automotive background. If you are a young man or young woman who wants to learn about this industry near me or anyone in the country message me I will gladly teach you

@kevingarren5198 4 жыл бұрын

You should have showed the pro charger running and the last 15 mins is product pushing. Not a great video.

@mattowens2830 5 жыл бұрын

Why would you use a chambered muffler on a motor thats force inducted? You're wasting your money and not doing anything for the motor.

@lostnparadise3178 4 жыл бұрын

Way to many commercials in one video. Junk station !

@ktmxkid243 3 жыл бұрын

After all that no start up with everything complete and worst of all no test drive. If you really understand gearheads you would know that.

@mikedewsberry1774 4 жыл бұрын

That's a waste of time.......

@Ram-re5em 4 жыл бұрын

CARB will be gone soon thanks President Trump!

@chancewindham1718 4 жыл бұрын

God damn this guy sucks.

@charlestorruella8591 4 жыл бұрын

I camt watch stacy fuck david he dosnt do any of his own work like he says he does just like copperhead

@nickcrimi9657 4 жыл бұрын

All the work and money for a junk Dodge. 🙄

@itchytriggerfinger7622 4 жыл бұрын

Nick Crimi I would rather it on a Dodge hemi than any Ford junk.

@jacobrosario9735 4 жыл бұрын

60k miles sounds not junky to me. Feel free to enlighten us young kemosabe