Make sure to leave a comment within the first minute of a new upload to get a reply from me 👍🎉

Tearing down before testing and not immediately not taking the disc out when powering on made this the most stressful video I’ve watch in a while.

The 3 rings are saying that a "General Hardware Failure" happened

The three blinking red lights are a general hardware failure.. More than likely the video board due to the funky display that it produced

The minute the screen flickered I knew RRoD was coming. It gave me flashbacks to when my 360 red ringed on the Gears of War 2 release day. Played the game for two hours and screen did that same thing. Rebooted to RRoD.

Does anyone else notice the thumbnail like he is teasing a face reveal?

So I used to fix these... so some info. Power bricks. There were 3 for the fat console. 203w (the big one with the metal connector), 150w (Some of these still had a metal connector, some didn't), 125-ish w (plastic connector). The 203w works on all fat consoles. The 150w only works on Falcon and Jasper consoles (I think you have a zephyr, but not 100% sure) and the 125-ish only works on Jaspers. 3 blinking lights = Red Ring of Death. Due to the fact the console booted and THEN crashed, there's a high chance you have a GPU fault. Usually this is just a bad solder joint under the GPU and can be easily fixed with a solder reflow. However, a reball is a much better fix. So it IS fixable if you want to do some digging. :) Best thing to do would be to get the full error code, which I don't remember how to do off the top of my head. I think you have to hold the sync button and press eject.

The funniest part is I was thinking to myself hmmm let's play MW3 after this video

Wow the white Xbox 360 in the trash had the rrod who'd have thought..

"these toothpicks break like toothpicks" Every 60 seconds in africa, a minute passes.

Considering it powered on the first time and the started displaying artefacts I'd say it's the graphics chip. You need to reflow the solder under it or replace the chip it self.

The 3 rings says that it is a "General Hardware Failure" commonly known as the red rings of death :)

Here comes the master of the dumpster dive, Mr Speedy Diver!

There are many videos that can fix 3 red rings problem, you should try to fix it and see if it's still working or not. It should be general hardware or motherboard problems Also do not try to turn on Xbox 360 when that happens because it will make a very loud noises

You can get the error code by holding the Sync button while pressing the Eject button 4 times. Each time you press that will give you a number of red segments on the front. That’s how you get the 4-digit error code that will pinpoint this console’s issue and can be repaired accordingly. A checkerboard screen like this one had before dying usually means the HANA chip or GPU has a cold solder joint. They can be reflowed and be fixed for a number of weeks or months, or they will need to be reballed to be permanently fixed.

I love your videos speedy your the best

Speedy I’ve been watching when your name was GameStop dumpster diver sum like that but I’ve been watching for almost 4 years and I do hope you see this

Its the red ring of death and only have three blinking red light and has broken solder joins under the gpu

The console overheated which are the red rings or the components are messed up

I've had my Xbox 360 Pro for 10 years and never had a problem with. Spent many hours playing it too, and still works great. Not sure what people were doing to cause so many problems with it.

You should try taking it appart again and put some pressure on the GPU to see if gets proper connection, and then power it on while holding the pressure, just enough to see if you can get to the menu.

We are the early birds🥳🤯

Three flashing red lights mean that the Xbox 360 console or its power supply has a hardware problem. To find out whether the problem is with your console or with the Xbox 360 power supply, try these solutions. Unplug and reconnect your power supply.

13:45 this could mean either of 2 things: 1. might just need to replace the cooling fan 2.you may need to replace the GPA, it costs quite a bit of money, and some serious welding skills to do. so heads up!

power supply should be green and it means theres a hardware problem the 3 flashing lights

"Someone may have been inside of this before me which is always a good thing to note" also a good tip for bringing a woman home.

I think the smaller warranty sticker that just said “Microsoft” is what older models had

that silver tag is legit,its an older version of the console,the newer ones had the paper looking one in the center

3 rings is the “general hardware failure” or also known as the Xbox 360 “red ring of death”. Your really in trouble if you can’t solder a new video chip

Three is the red ring of death An actual red ring just means AV cables out

also if u want a quick fix for this 360 wrap it in towels and turn it on for like 15 minutes then off to let it cool down,this will allow the solder on the gpu to reball somewhat and voila the console will work again until this cheap solder gives out again but take heed because after doing this a few times it will cook the processor to the point of no return...i have had multiple 360 consoles like these old style and actually still have 3 in my closet and waiting until i find a few power bricks for them and also controllers.

4 is just for Indicating an AV cable is unplugged or something similar. 3 is a general hardware failure more than likely the GPU in this case with the graphical glitches. A quick temporary if would be a heat gun to re heat the solder joins under the gpu chip which could get it working. Mine worked for 6 months after a reflow which was more than enough considering it only cost me like £10

When I had a original xbox 360 I had the same error it was generally because it had a power error. So it was most likely the power brick because its light light also turned red so you could try that

Hi speedy I’ve been watching your vids when you had 100k love your vids

Hey, I have been watching for so many years and years!!!!(Even tho Im 13 so I started watching at a young age) I love your channel and seeing it grow over the years really amazing me! Keep up the good work!

3 rings mean "general hardware failure" 4 rings means the a/v cable is unplugged. if you press the controller sync button and the disk drive eject button 4 times in a row at the same time you get a code 4 rings mean 0. 1 means 1 and so on. you can search the code on the internet so you can figure out what is wrong.

9:06 was really expecting a instant transition to it all put together =/

Add new thermal paste !

Most of the time the solder balls underneath the GPU have lost contacts to the motherboard. Or the HANA chip needs to be reflowed. A tempory solution is applying the towel trick, but it won't take long until the problem comes back.

14:22 I saw it glitching and *KNEW* that was *going to* happen

4 lites means it's not plugged in 3 lites means there's something really wrong with the console most common 2 lites means it's overheating 1 lite means same thing as 3 lites except there's less stuff wrong with it

I love your videos ♥️

That 360 just pulled the ultimate No U

This consol is 2 days older then me!! WOW!

Easy fix, at least temporary fix. Heat the board up. Likely the GPU that has issues. Could be the HANA chip too.

we are one of the early people!

Just so you know. It was asking for an update because that xbox is jailbroken thats why it must have gotten the 3 Red Rings Of Death.

I got a tip when my Xbox got ring of death, take off the cooler from the chip. In Sweden we had copper coins before, put that between and screw it back on. It actually Worked. The problem is that the cooler dont cool down the consol thats why it overheats and the ring appears

Yeah I'm here 4 minutes after posting!!! that NEVER HAPPENS!!! 😮🤭😁😁😁😆

Hey again I just clicked and I'm excited to see if it works

One red light means a small hardware failure so like a heat sync or like a disk trey 2 lights means over heating 3 lights means general hardware failure (lead free solder joint somewhere on the board has gone dry( unfixable without a machine)) and 4 means the AV cable fell out

Dude you have been one of my fav youtubers for a while brooo frfr tho i remember the day you hit 1 mill nd before you were so hype and exited to hit it brodie but im glad you hit 1mill and wishing you the best for more 💯💯

Early squad where you guys at (:

Ooooffff, general hardware failure! It is painful to see this :(

The power supplies for XBox 360 are not all the same. Microsoft has made a few revisions of the motherboard. Some require less power which means, they can make a smaller transformer or whatever for the power supply, which reduces manufacturing costs. For example, you can plug a 200 W for a XBox that requires 100 W or 150 W but you can't plus a 100 W power supply to a XBox that requires 150 W (the plug won't go in). PS: I made those numbers up for demonstration purposes.

That's a Zephyr you have there, 2nd revision of the 360 after the Xenon...first one with HDMI and the 2nd gen gpu heatsink with the heatpipe extension. Some of the solder balls under the gpu have cracked, that's what those artifacts on the screen were. The only proper fix is to have the gpu removed and reballed with lead solder.

That looks like a gpu faliure

I found out he has yellow hair

I just love when you make these videos makes my day

The only reason I clicked on this video because I saw that LG V20, the phone I am using to watch the video.

1 ring = Hardware Failure 2 rings = Overheating 3 rings = General Hardware Failure 4 Rings = No AV Cable Connected

Notification gang😤

The Xbox 360 console power button blinks red A blinking red light on the power button means that your console doesn't have enough ventilation. The red light will continue to blink until the console cools down.

Needs a reflow, gpu is the chip on the left, under the disk drive, take a heat gun to it at 400 defrees F ,for 15 minutes, about 10 on the top and 5 on the bottom of the board, then test it again. If it fails it needs a new gpu from a professional.

Early birds, where u at?

its overheating put new thermal paste on it

I’ve had the same original Xbox 360 arcade for 15 years and it still works

The Xbox 360 console power button blinks red The light in the center of your Xbox 360 console power button is blinking red. A blinking red light on the power button means that your console doesn't have enough ventilation. The red light will continue to blink until the console cools down.

Haha I am here only My hero academia fans will understand Aw man I’m late I know he won’t respond

Surely it would make more sense to test the console to see if there in any life in them before taking them apart. Would be more satisfying if it didn’t work and you fixed because doing it your way you never know if it was working or not

Yep. Its deadso. 3 rings is the RRoD we all know and love. As a 360 owner I honestly had doubts that it worked since it's out of a dumpster and, well, it's a Phat model of the Xbox 360.

Idk if you were ever told or not about those power bricks but the metal one has the highest power output of all the bricks. The other ones were made in such a way that they can't fit into older fat motherboards, tho the metal plug can power all the fat models. Theres 3 different chip revisions to the fat models and therefore 3 wattage difference power supplies

Wait last time I watched your videos was when you was at 500k and now I’ve come back and your at million

His hands in the video:👍👏🙌👐🤲🤜✊👊🖐️✋🤚👋👌🤜🤘🤟🤙🤞🖖☝️👆👇👉👈

i fixed mine by replacing the xclamps with a solid piece of metal and replacing the thermal paste. use something good. that thing gets hot. forgot to put. used a heat gun to reflow. you gotta replace the xclamps. it lets the board flex too much when it gets hot.

R.I.L XBxBox 60 2007 to 2020 U had served him well, for 5 mins

Three red lights on the Xbox 360's ring indicator representing a "General Error requiring service of the Console or Power Adapter," commonly nicknamed the "Red Ring of Death." The three red lights on the Ring of Light indicate that a General Hardware Failure error occurred.

Love you videos keep grinding speedy 👍🏽

It needs the GPU and Southbridge chip to be reballed/resoldered bro that's why it had problems in the display and also put new thermal paste on the GPU and CPU and it should run like new again 😉

Keep up the good worh work*

Am I the only one thinking when he starts talking about power bricks "shut the fuck up and plug it in!!" 😂😂😂😂😂

The tiny one for the power brick is for Xbox 360 elite and the other one you are correct it goes to the original Xbox 360reason why I know is because I have the original and the Xbox elite

@ 3:51 - You absolutely hate opening the back because you don't know the trick. All you need to do is turn it upside down, grab the front side that is unsnapped and quickly open it up like a book. One loud pop and half a second later the damn thing is off. Also, that was the original Microsoft sticker, the larger paper ones you talked about were Microsoft refurbished stickers. They were more common because these had an 80% failure rate. Three blinking red IS the RROD, 4 red lights is a video cable issue. Yes, there is a code, you hold down Sync + Eject and it blinks 4 digits. The code doesn't matter because we can clearly see that the GPU is toasted. A reflow of the GPU BGA might give it a little bit more life. Reflow GPU to 220C with PROPER equipment and 12V Fan speed modification for best results.

Hope your ok speedy

Hey @speedy try getting the secondary code from the console. Hold sync button. Press the eject button 4 times. You will het 4 codes. 1 light flashing means 1. 2 means 2 and 3 means 3 and 4 means 0. Example 4 flashing 3 times and 1 light flashing means error code 0001

Old xbox 360 iconic red ring of death

this guy is literally the robin hood of dumpster diving

Speedy delivery is so helpful

I havent watched the speedy diver since 2018 he is the same as before good to know :3

Solution 1 check your power supply solution 2 try outlet in a different room solution 3 cool the power supply.

His Hands at the Beginning 💪👈👉☝️👆👇✌🤞🖖🤘👆🤙👊✊👎👍👌✋🖐🤛🤜🤚👋🤟👏🤲👐🙏🤝🙌🤣🤣🤣🤣🤣

Three red lights on the Xbox 360's ringindicator representing a "General Error requiring service of the Console or Power Adapter," commonly nicknamed the "Red Ring of Death." The three redlights on the Ring of Light indicate that a General Hardware Failure error occurred.

I miss all this guys videos.

Easy fix for it, just unplug the wire going to the power brick, then plug it back in, if one Redlight appears, then it means your DVD or hard drive is bad

I just watched a video about it. The 3 rings means the console is not getting enough power, so basically you just need to get a new power brick because the light on the power brick was orange, which means its broken and not giving the console enough power. The light on the power brick should be green.

replace the thermal compound between the cpu, gpu, and heat syncs. Gpu more importantly since the issues seem to be video. Then boot it up and it should be golden. I recently replaced the thermal compound on someone's slim 360 because it had been starting to lag playing black ops zombies. Like bad lag. the issue was fixed immediately so that was good

When he was putting it back together and he snapped i expected the video to Skip to him done putting it back together 😂

Rest in Peace Xbox 360

Nice video👍🏻 Like the video

Take the board out stick it between 2 pieces of foil place it in your preheated oven at 385 degrees for 10 minutes ..it should reconnect all the solder points on the board