I just bought the more powerful one today. The Worx 800 CFM and it's a BEAST!

I've been using a leaf blower for a while on my car. It pushes water out of the nooks and crannies and dries it well enough to follow up with an express wax. I prefer it over exhausting myself and using towels.

5:30 "por $50 dollars" the old spanglish hehe

I have this exact blower. I use it mostly to dry off my car & other cars I wash & I agree with you on it not working well on paint that isn't in the best condition or still has surface contaminates but on vehicles that still have a decent layer of wax or sealant on it, it blows the water off no problem. The size and weight don't bother me just like the noise doesn't bother me but my hearing is bad anyways from working around jets in the Air Force. Overall, I think it's a great blower in aiding with drying off vehicles.

Wow that’s funny man I just made a video of the worx cordless blower. Had no idea you made this one. Amazing to see how far you’ve come, ive been a fan for a long time. You’re the reason I started my business. Huge help! Keep up the good work

I have used a similar blower . Just a few more notes to add Pro You can still use it as a leaf blower for the house . Important point since you can make the wife pay with home budget and not use your detailing product budget to purchase :) Now there is a few cons to this product One of the biggest con that I have found is that it does not dry the car completely which becomes a bit of an issue if you are working outside and it is somewhat hot, by the time you come around to do a final dry with a towel the panel may already be dry because of the sun / weather which will leave you with water spots which are a pain to take out. Another con is the set up , you need a big extension cord and you need to work around the car with it plugged in , and then you have to put it all away. I have found using a good drying towel to actually be faster and less of a pain than setting up the blower. Another big con is that it is a blower at the end of the day and it takes a lot of electricity to dry a car, if you are doing 3 or more cars like myself a week , it will add up on your monthly bill quickly . I think this product would be great if it was cordless and it had a good battery , there are products that meet this criteria but they are pretty damn expensive. This is the type of product you have in your arsenal but you just do not bother using it all the time, the "convenience" is not really a " convenience" .

Thanks for review bro, It helped me to decide to buy it or not. Love your videos, love to detail my car too your videos do help me detail better.

Good Job, thanks for the info.😎

I use the ego blower and love it. Blows water easily off my waxed car. I do usually follow up with a towel but the towel is barely damp afterwards.

Have the same one for around the house and have been wanting to give it a go next wash!

Can we use this with a rinseless wash ?

Hey! I wanted to know how loud it is

You are right, the big boi pro is also not great at clearing water from the average car surface ie. Paintwork which hasn’t been corrected. One thing I do want to know is whether this machine could do as good a job as the big bio pro at blowing out a cars interior - carpets, seats etc. it was fantastic for this and I miss it a lot!

If you have the chance review a corded one like the ego 530cfm. You can use it for 90days I think or 30 from home depot and if you don’t like it they give you the money back.

So what will you recommend ego blower

I used the worx 520 today and it moved the water but didnt really dry it.. might have to upgrade to the 521..

We have it in my country this WORX blower.....it is fantastik machine

I can see it or something like it being useful if you don't have compressed air available to blow out engines, sideview mirrors, window tracks, door jams, tires/rims or truck beds.

Try removing the tube and make your own. maybe a pvc reducer to concentrate the air and reduce the length. I have a cordless craftsman C3 blower that I shortened the tube and added a 1" pvc tube and works great. Actually dried my car and my paint sucks.

What would be your best method to dry the vehicle?

Dang it, Oscar. The WORX blower is as tall as you are...

The less you physically touch your paint the better

So Oscar... you're saying this... "Worx"? Yeah, I went there! 😜

I have one of the E-Go 56V cordless. I love that thing.

I use one on my personal daily drive , the car is well maintained . Parked indoors and wash 1 or 2 times a week . Love it .

How do you prevent the blower from blowing dust and dirt and embedded contaminants in the paint?

I use my Rigid vacuum/blower vac 5hp. Air works wonders.

How do people feel about using a blower to clean out the debris from inside a car? I’m not saying to only use a blower, but to use for the first pass

I enjoy your videos immensely and thank you for the great content. Question: Have you figured out how to keep cats off the vehicles at night? They leave paw prints at a minimum, but lately, I have been getting scratches on the roof and hood of F150 and Explorer. I think what happens is when we let the dogs out at night, the cats gets startled and bolt off the vehicle, leaving scratch marks. Please help.

What do u use to dry vehicles?

Can anyone school me on what I did wrong ? Did tires first. I got my car wet and then I did the gilmour foam gun all over the car. Let it sit for about a minute (washed it inside my garage so no sun and it’s not hot today) then rinsed it. Then went over it again with the foam gun and microfiber mitt from top to bottom. Then used my Worx leaf blower to dry the car a bit and as I was using the iron remover and then bead maker I noticed water marks on my hood ? Is it because I had no protection on the paint prior to today so the water didn’t slide off the car which caused this ???

I have this blower and love it, but I’m not a mobile detailer like you. I wash my car regularly and use beadmaker so it works awesome.

Is this better than the sidekick? Because I have the sidekick. 🤔

So if... IU'm washing my car in m y own driveway... I could do like.. 2 chores at once or something?

Does it leave water spots?

Got a new van?

If you push the button and pull the plastic the long piece detaches

you should of tried the toro power jet. More cfm and higher wind speeds for about the same price.

I bought a new B & D 11 amp blower yesterday and washed my car early in the A.M. For being my first time it did fantastic, the water droplets that were left over I did with a small mf towel. Faster, it wasn't, but more efficient removing water from roof, inside door panels and trunk. Well worth it's cost to me. Better yet, I minimized the chances of scratching the paint.

Because it is a leaf blower does that mean it doesn’t have a air filter?

Dreamville!

I use a kobalt 40v cordless blower. I use it without the tube. it's compact and does a good job.

Got the WORX WG520 yesterday October 14, 2022, and used it today Oct. 15, and does a mediocre job. Washed my car today and using the WORX WG520 made water beads very small and plentiful. Took me 20 minutes to blow dry my new 2022 Honda Civic Touring, built on September 2022 (date of mfg on the driver door side) and received from a Honda dealership on October 4, 2022, with 2 miles. I bought the blower to avoid getting watermarks or streaks. It does blow leaves very well, but not so good for drying a car. I duct-taped a microfiber cloth around the plastic tip so an accidental touch on the car paint would not leave a scratch. The WORX WG520 is very light, the air intake will suck your tee shirt when close to it. I think suction is better than it blows. The Ryobi 730 CFM 40V Blower could be better because it has 130 CFM more than the WORX WG520 600 CFM. For $55 plus add sales tax, you are better off spending $90 to $120 for a much better product. You get what you pay for! The WORX WG521 is said to be 800 CFM you could try it. WORX WG520 not recommended as a car dryer. Plan on getting a battery-powered unit because dragging around an electrical cord is a nuisance and you don't have to worry about becoming electrocuted after washing your car. Safety First!

I've got one of these , it removes 83 1/2 % of the water ! My car is very well maintained , but used it when I was helping a bubby and it only removed 37% of the water , cause his had no wax on it . So I would say , it would be good for 54% of the people !

Can you disclose how much the maker of the blower paid you for this video

I have the same one . The tip at the end is too wide not meant to dry cars I guess ... it takes long time to dry the haul car even though it’s got power .

That’s why you need to get a real big van and hang it on the shelves

$400 or $50 to do the same thing🤔 I will spend the other $350 I saved on something else that is actually worth $350. You could spend $39.97 for another detail hose for your Ridgid wd4070 vacuum blower part and dry your car that way, but then you won’t have fun leaf blowing the yard. 🤣😂

Your views and opinions make sense to me.

Ugh, I wish you would have gotten a battery powered blower. I know you are all about saving time and a battery powered will help a lot and you don't have to drag that cord around.

Makes sense why sometimes all the the water doesn't come off . It's the contaminated paint.

Quote “ trash paint “ ok

I bought a $19 blower on eBay. Whatever. Point is to remove 80% of the water to make drying faster.

I feel like one of the big cons of this machine is the tube. if it were at least a foot shorter and had a smaller opening that might make it worth it. diy fix?

This blower is too weak. Try the ego 650 stubby. Huge difference in size,price and power

que mamadas, parece estar en AA!!

What Oscar is saying is true. If your car paint is not aleast claybar. This machine does literally nothing. The only spots Ill use it on is rims and maybe door jams. Holding this machine up above even a small car will cause shoulder pain for you in the long run. It got like 600 cfm. That's a lot of power. So if you detailing any car in a small garage. Good luck with this. You going to be pulling the electrical wire against the tires and then its going to snag the paint. The leaf blower might even hit the paint. I got this two years ago from amazon and returned it after scott from dallas paint talked about this. Great machine just not good tool for detailer

...HAIR DRYER WORKS GREAT IF YOU ARE A YOUNG WEAKLING...!!

What shoes do you like to wear when you are washing a car?

Couldn't we just use a squeegee of some sort? Much smaller and very effective! 😊

You can't use this garbage. Electric blowers are terrible. You should use gas blower which is about $100 as well. A lot more powerful and yes louder. You need noise-canceling headset.

Not as powerful than the ego new model

It looks like you got hit in the face by a Mack truck!!!