Does Your Festool Domino Do This ?
Рет қаралды 33,887
Күн бұрынIn this video Sedge teaches BigD another Festool Domino skill that saves a ton of time in lay out of mortise and tenon joinery .
Be Positive and Stay sharp.
#domino #woodworking #howto
TSO Products: tsoproducts.com/?ref=cwmk4ofe
TSO Low Profile Stops:
tsoproducts.com/clamping-work...
Pica Pencil:
www.kaizensource.com/?a=sedge
Festool Domino : amzn.to/3OFPAFR
Affiliate for :
TSO Products : tsoproducts.com/?ref=cwmk4ofe
Kaizen Source : www.avantlink.com/click.php?t...
Taylor ToolWorks : lddy.no/1eoy5
Forged 3D : forg3d.store/sedgetools
DISCLAIMER - As an Amazon Associate I earn from qualifying purchases.
Chris’s AV Gear:
Panasonic 4K Ultra HD : amzn.to/3pXXPzX
DJI OSMO : amzn.to/4bYRiKK
Rode Video Mic GO : amzn.to/3vXOJqx
Rode Wireless Go 2 Mic : amzn.to/45aodZt
Sony MDR7506 Headphones : amzn.to/3I450g5
SanDisk 256 GB Extreme Pro SD Card : amzn.to/3i0iT4u
SandDisk 128 Micro SD : amzn.to/3zeJab3
Follow Us on the social media platforms :
Website: www.sedgetool.com/
--------
Instagram: sedgetool?...
--------
Facebook: / sedgetool
--------
Tik Tok: www.tiktok.com/@sedgetool?lan...
_ _ _ _ _ _ _ _ _
Green Suiters Podcast: podcasts.apple.com/us/podcast...
SedgeTool is all about woodworking and having a great time doing it. SedgeTool is Brian “Sedge” Sedgeley who brings 30 years of woodworking experience and tons of energy to the team. Chris "THE UNIT" Seibert who films it all! If you want to have a good time and learn something about woodworking, then you’ve come to the right place.
All views and opinions expressed during SedgeTool are explicitly those of SedgeTool. They are not intended to represent any claims, value statements, or opinions of any of the tools, brands, subsidiaries, or parent companies of brands referenced, visible, or mentioned on the show. The SedgeTool team is here for entertainment and educational purposes only. SedgeTool is not a replacement for proper training or safety guidelines as outlined by the manufacturer's owner’s manuals.
@Jpres Жыл бұрын
When I watch sedge I find out about tools I never knew I needed. I love that pica pencil.
@pauljordan756 Жыл бұрын
Thanks Sedge and Big D for the Wicked helpful insights on how to properly use my Domino. Y’all have the best channel for Festool owners. Cheers from Tennessee. Have a great Memorial Day.
@sedgetool Жыл бұрын
Thanks Paul .... Have a Great Memorial Day as well......
@davidmeyer9204 Жыл бұрын
Thanks Sedge, Big D and Chris. Have a wonderful Memorial Day Weekend. Thanks for showing some support for Derek From Malden. Great guy and a great friend.
@sedgetool Жыл бұрын
Thanks...Have a Great weekend yourself !!
@automaticprojects Жыл бұрын
Big D is such a great sport.
@sedgetool Жыл бұрын
👍
@lucwillemsens1901 7 ай бұрын
Thank you Sedge for the great explanation 😊
@sedgetool 7 ай бұрын
Glad it was helpful!
@salehfurnituredesign Жыл бұрын
Thank you for sharing this tips! Big love brother 💚
@sedgetool Жыл бұрын
Thanks you sooooooooo much 🙏
@moderntouchfurniture 11 ай бұрын
Every time I watch one of Sedges videos I save time and money on my projects! Thank you guys for taking the time to do these.
@sedgetool 11 ай бұрын
Our pleasure!
@themightygoose1 5 ай бұрын
Every time I watch his video, it costs me $. LOL. But I do love his content. Great videos, I learn a lot
@moderntouchfurniture 5 ай бұрын
@@themightygoose1 LOL yes I agree, I'm up to 13 Festool's now, yike!
@BandD326 Жыл бұрын
This came just in time for my current project amazing Thanks guys!!!!
@sedgetool Жыл бұрын
Thank you for watching !!!
@brokenleadwoodworks Жыл бұрын
Fantastic tip! Thanks for sharing!
@sedgetool Жыл бұрын
Thank You ...
@vossievos3040 8 ай бұрын
Always good just pouring over the clips absorbing master knowledge
@sedgetool 8 ай бұрын
I try
@kellychurchill808 2 ай бұрын
Wicked Tips! I used this video to help me assemble a shoe rack yesterday. The offsets came out perfectly. Like you said, due your due diligence when setting up, laying out, and marking your work pieces. Thanks for another great video and tips!!
@sedgetool 2 ай бұрын
Glad it helped!
@milandjordjevic5949 Жыл бұрын
Thank You Guys for this Tip . Thumb up 👍👍
@sedgetool Жыл бұрын
Thanks...Lots to learn on the Domino...
@AndrewJohnRevell2017 8 ай бұрын
All your videos are always enjoyable. After I watched yours, I have got seven festool equipment now 😅 I have learnt the new things from you. Hat off to you
@sedgetool 8 ай бұрын
Rock on!
@kennylakits4093 Жыл бұрын
Love it. Well done
@sedgetool Жыл бұрын
Thanks
@barriowoodworks Жыл бұрын
Great tip on using the flap on base plate to get your 20mm spacing.👌🏽
@sedgetool Жыл бұрын
Thanks !!!
@andymok7945 Жыл бұрын
Great tip, thanks.
@sedgetool Жыл бұрын
Thanks Andy !!!!
@AngieWilliamsDesigns Жыл бұрын
This is exactly what I was looking for. Thank you for answering this question. I don’t know if I was the one that you read. But I asked this in the last week. I’m making a children’s table for my grandson and I want it to match the table I made for his mom. And it has an offset. Makes it so much easier than how I was doing it before.
@sedgetool Жыл бұрын
Angie...It was your question....Thanks for asking a GREAT question !!!!
@d.r.3397 10 ай бұрын
I am so glad you asked him this!!! I had the exact same question. Thanks for the assist!!!!
@twoblacklabs 7 ай бұрын
Yet another example of why I’m still considering converting to my shop to metric. I’ve toyed with the idea for a long time. If it wasn’t going to cost me so much to retool/replace every measuring device, I would have done it by now but since retiring, I have to choose a bit more carefully where every dollar goes.
@sedgetool 7 ай бұрын
You can do it!
@michaelmenard8614 Жыл бұрын
thank you for this explanation. I watched a festoon live once that covered it and was confused. now if I can only remember it....
@sedgetool Жыл бұрын
Cool ..glad to help
@helmutnirag5242 Жыл бұрын
A nice one. Thanks for that skill. Greetings from Germany.
@sedgetool Жыл бұрын
Many thanks!
@BW-cw4lq Жыл бұрын
FANTASTIC
@sedgetool Жыл бұрын
Thank You !!!!
@user-zp3mh6vk4s Жыл бұрын
Thanks, when working with domino, you must always count. Greatings from Ukraine.
@sedgetool Жыл бұрын
Thanks
@MattLitkeRacing Жыл бұрын
I saw a magazine explain this by adding shims. Then I saw you explain it this way years ago. As you have said people over complicate this machine. Keep it simple!
@sedgetool Жыл бұрын
KISS baby !!!
@Vancleave79 Жыл бұрын
Just had a wicked awesome thought…. You can probably use this same principle for stacked tenons. I thought about getting different thickness shims to put under the fence but why do that when you can use the precision of the machine!
@sedgetool Жыл бұрын
Yes you can !!!!
@dp1068 Жыл бұрын
Great video guys. How simple you make it. And yes you hadn’t made this video because I’ve looked. I’ve just finished a coffee table and could have done with this video. My dominoes were all over the place. The wood is very chunky so I was doing a 2x2 grid with the dominos. I got lost with all the measurements, used up a day working on it, but I did get to make it fit in the end. On the plus side I’m making 3 more the same only this time I have the knowledge of your video. I’m offsetting the apron a bit more because the leg has a 10mm radius on all edges including the top, so also offsetting down from the top as well. I’m going to go to a larger domino and only use two instead of 4. I’m a terror for punishment. But how do you learn if you don’t push yourself. Keep up the great work on your videos. 😊
@sedgetool Жыл бұрын
Glad it Helped ....Thanks
@Mike--K Жыл бұрын
That is the best 10mm offset I've seen. 😀
@sedgetool Жыл бұрын
Thanks
@G0F15H Жыл бұрын
Nice shirt! I'm from Indiana and 3 Floyds is one of the best in the Midwest
@sedgetool Жыл бұрын
3 Floyd's is AWESOME...I was at Dark Lord Festival last weekend !!!
@AaronGeller Жыл бұрын
I had a project with an unintended offset and I know I know why... mystery solved. Also, I was talking with Jason in Toronto and when I mentioned to him that I've commented about you doing a workshop, he said he's ran the idea by you as well. I would totally love to attend a collaboration between the two of you for a workshop.
@sedgetool Жыл бұрын
Thanks Aaron..... We keep tossing the idea back and forth for weekend workshops...you never know......
@AaronGeller Жыл бұрын
@@sedgetool There is one thing I do know, whenever it happens, you can count on me being there :) Anyways, thank you for another incredibly useful video!
@danchev338 Жыл бұрын
Thank you Sedge and Big D, another question about the domino, can it be used to cut a groove along the material to have a long floating tennon or an inlay of another material?
@sedgetool Жыл бұрын
yes
@jasoncnc983 10 ай бұрын
Another great video, thanks guys! Forgive my ignorance but I'm a lost with the explanation starting at 9:35. Set the plate height at 40, subtract 20 from 40 then divide by 2 to get 10. ??? Is there a specific formula to use for this? One that works for different thicknesses and offsets? For instance, I'm building a workbench and my leg thickness is 90mm, apron thickness is 32mm, and I want a 19mm offset. What is the formula to determine the settings for the Domino? Is there a different approach to this when using the DF500 vs DF700? Thank you for your knowledge and expert advice. It's very much appreciated. Cheers!
@sedgetool 9 ай бұрын
There is no formula...the # that appears in the window is the thickness of the material
@vbacans Жыл бұрын
Sedge - I have a question on using the domino for a long cabinet. First, I will build a kick plate as you have shown in your video. Then, I want to build a 2438 mm (96in) cabinet. I want to put interior cabinet dividers at 520 mm along the length to act as sides for interior cabinets. I plan to put drawer slides to allow using a piece of 18mm plywood as a shelf for some of my systainers. They will be 2 sustainers deep and grouped. For instance, I will have my track saw sustainer on the front of the shelf with the accessories systainer and parallel guide systainer on the back of the shelf. How would you lay this out for the proper domino locations? Any help is appreciate and if I could afford Festool drawers, I would use those. Retired by the way.
@sedgetool Жыл бұрын
I would place dominos every 150 mm in the shelf and use screws as well
@haroldmack1704 11 ай бұрын
I know you’ve said on just about every vid of yours (prob every, not just about) that you have to have the machine running when changing setting from tight to wiggle room, but I was wondering why it has to be running? By the way, I really appreciate your content and teaching!
@sedgetool 11 ай бұрын
they are tiny synchronized gears and the machine should be running.... I know quite a few folks who do not know this ( it's in the owner's manual ) and have been switching between gears with out the machine running. This is ok ...but when the gears get stuck do not try to force it or gears will strip....so...That is what I always switch gears while the DF500 is running...no need to do this on the DF700
@Tilburger72 Жыл бұрын
So in this case, for more then 10mm offset, you can't use the stop lock am I right? It only goes to 40? For a traditional tenon, we use 1/3 of the thickness. 1/3 * 25mm is 8.3 Why don't use you 8mm domino's?
@sedgetool Жыл бұрын
thanks for the reference ... I wanted to keep the math easy for this video....
@Tilburger72 Жыл бұрын
@@sedgetool Ok I understand. But in general, would you also apply/advice the rule of 1/3 and to use a thicker domino if possible?
@KyleVeatch Жыл бұрын
Did I miss something? You kept saying you would explain how the 40 setting gives you a 10mm, but I never heard it.
@Mike--K Жыл бұрын
It's a bit cryptic, but the explanation starts at 09:40. The 20mm plate height for the apron skirt puts the domino center 10mm from the face of the skirt, but not centered on the end of the skirt. The 40mm plate height for the leg puts the domino center 20mm from the face of the leg. When the skirt is attached to the leg, the difference between the domino centers to the face of the skirt and leg is 10mm. It would have been easier to follow if Sedge had drawn registration line 10mm from the face of the skirt and 20mm from the face of the leg, then put the two registration lines together to show how the centers of the domino create the 10mm offset.
@sedgetool Жыл бұрын
Thought I mentioned it
@KyleVeatch 4 ай бұрын
@@sedgetool you did! Funny how I am rewatching this video months later after getting more practice with the machine and it makes so much more sense 🤣
@bobwhelk2117 9 ай бұрын
A dry erase board would have been helpful.
@sedgetool 9 ай бұрын
Ok Thanks
@tundrawhisperer4821 Жыл бұрын
White on Walnut would be good.
@sedgetool Жыл бұрын
Sure wood !!!
@tundrawhisperer4821 Жыл бұрын
@@sedgetool 😂😂😂
@johnNYgoesLA 11 ай бұрын
Honestly, that is a nobrainer... that's how I do it
@sedgetool 11 ай бұрын
OK ...cool !!!
@johnNYgoesLA 11 ай бұрын
@@sedgetoolI know that came out rude, I honestly do feel like it is common sense to use it that way.... I love most of your videos! Don't be discuraged by my comment
@LizardHeadd 10 ай бұрын
How about putting a domino at a dogleg in a benches leg.
@sedgetool 10 ай бұрын
working on it
@victorhurley3542 Жыл бұрын
There's a whole lot of distracting chatter between two great mates and that's all fine and dandy. However, as a process for an instructional video it is really hard to follow and sort the chaf from the wheat. Too random for my tastes. Others may love this process. If so enjoy.
@sedgetool Жыл бұрын
Thanks Victor.... I love all the Great video content you produce as well on your you tube channel and by the amount of subscribers you have you must be on the right track !!! Good For You ....
@themightygoose1 5 ай бұрын
He set the fence at 40, because 40 minus 20 equals 20, divided by two equals 10. So he set the fence at 40. HUH???
@sedgetool 5 ай бұрын
ok
@webtheweb 5 ай бұрын
Ok but where did he get the 40 from? Am assuming the 20 was from the thickness of the material....
@RUM123 4 ай бұрын
The apron is 20mm "material thickness". There's your 10mm split of material thickness is 20mm, the Domino puts the mortise in the center of the material. You raise it to 40mm, the difference between 40mm and 20mm is 20mm. The Domino puts it in the center at 10mm again, which gives you the 10mm offset. Pretty simple.