For more sound and audio reviews make sure you subscribe and hit the notification bell by clicking this link: bit.ly/SubGearly

I replaced my floor, my walls, my ceiling and my furniture with surround speakers. I think I'm finally ready to watch Sharknado 6.

I prefer DTS as it always works on all of my 5.1 & 7.1 receivers, sounds phenomenal and the 3d space is accurate without ceiling speakers. I have frequent issues with dolby not getting decoded properly and ends up as down mixed 2 channel.

Dolby Atmos Object based surround audio in a mix and can reproduce up to 128 simultaneous audio objects in a mix, as opposed to the one single channel of sound. Dolby is more advanced, and produces better sound quality at a lower bit rate. There are many possible variations of Dolby Atmos home theatre installs, from a conventional 5.1.2 configuration all the way up to 24.1.10. However, most of us are restricted by space. The size of the room plays a big part of each configuration. Traditional configurations in the UK include: 5.1.2, 5.1.4, 7.1.2 or 7.1.4 - the final .2 or .4 indicates the number of upward-firing Dolby Atmos enabled speakers or modules for overhead sound. DTS X Standard object based surround audio which means that sound sources are tagged with a location in a 3D space, rather than being pre-mixed into 5.1 or 7.1 channels like Dolby Atmos. DTS X also uses less sound compression level unlike Dolby. This means sound can be delivered with more details and sound clarity. DTS produces better sound quality at a higher bit rate. DTS also supports other immersive formats’ speaker layouts, giving consumers freedom to choose their favourite layout” because it uses the royalty-free Multi-Dimensional Audio (MDA) platform, while Atmos uses proprietary systems. For the full DTS:X immersive experience, height speakers are needed, so you can start with 5.1.2 to a maximum of 7.1.4 at this time, based on our assessment of mainstream consumer platform capabilities. Auro 3D First of all, let’s establish that this question is about immersive sound (i.e. sound in 3D), which is adding the height layer (the missing third dimension) and not about surround sound, which was often wrongly marketed as a 3D sound format because it uses only a 2D horizontal plane of speakers around the audience. After myself - the inventor of the Auro-3D format - referred to it as “immersive sound,” it became the new generic term also used by Dolby Atmos and DTS:X. We also have a three-layered system (while Dolby Atmos has only two layers) that gives a much more natural spread of sound in the vertical axis (key to a natural immersive sound experience) with much more precise localisation which can be achieved without the use of object-based technology, which we only use where it makes sense. Everything starts with Auro 8.0, which are two quadraphonic layers above eachother, but of course it is missing the centre and LFE speaker of the 5.1 system which are crucial for playback of movies; therefore we advise on installing at least an Auro 9.1 system. Auro 11.1 became the preferred choice by our partner Barco for the cinema industry because it adds a height centre channel on screen, with six screen channels in two vertical planes, delivering the best screen sound of all immersive formats on the market today. Also, it’s important to remember that about 80% of the sound energy of a movie is coming from the screen, so it really makes sense to prioritise that sound quality, which we did in the Auro-3D format. The typical gap between the front and surround channels with 5.1 surround suddenly disappears when the Auro-3D height layer is installed. So the need for Auro 7.1 for the home is much less important if Auro-3D is installed. But for people who already have a 7.1 installation, they can choose Auro 13.1 which is based on a 7.1 surround sound system. This can be achieved with channel-based sound alone, which has many advantages in the sound quality and its immersive sound experience. We can further improve it using our object-based technology (called AuroMax) but it only makes sense if at least 20 individual amplified speakers (like AuroMax 22.1 or 26.1) are installed, which is not typical for a home cinema setup. THX Spatial Audio Creating realistic depth by simulating positionally-accurate sound in a 360° sphere around you for greater awareness in your in-game surroundings. THX Spatial Audio technology is an advanced positional audio solution that gives listeners a heightened, immersive entertainment experience. Designed for pinpoint positional accuracy, here's how it benefits your gaming: PINPOINT POSITIONAL ACCURACY GREATER THAN 7.1 SURROUND SOUND. What separates good sound from phenomenal audio is the ability to transport you right into the action. Whether it’s knowing the precise location of enemy gunfire, or embracing the moment as you stand in the center of an arena, THX Spatial Audio delivers a performance greater than 7.1 surround sound to make your audio come alive. Become Immersed with True-to-Life Acoustics with the unique sound design and engineering of every game is optimized by THX Spatial Audio to deliver the best audio experience possible. From a burst of gunfire to the strange noises of an alien habitat, THX Spatial Audio creates sound that is life-like and immersive, bringing out the best in these effects to transport you into the world of the game. Gain the Competitive Advantage by delivering 360-degree sound with pinpoint positional accuracy for greater awareness during gameplay, THX Spatial Audio allows you to locate sneaking enemies, avoid whizzing bullets, and detect nearby threats before anyone else. Stay Focused Longer with THX Spatial Audio because THX Spatial Audio delivers such a natural listening experience, it can help to reduce ear and brain fatigue because you’re able to figure out where every sound is coming from instinctively. This life-like placement of sound is achieved by adjusting its virtual speakers to match the audio source’s actual distance and location in-game. THX Spatial Audio continually expands its capabilities with the addition of new features, placing users at the forefront of audio technology. New audio technology is in development like Object and Scene-based Audio Support and Z-Axis Sound. DEEPER IMMERSION AND INCREDIBLE REALISM WE’RE TRANSFORMING TRADITIONAL AUDIO EXPERIENCES INTO UNBELIEVABLE 360° SOUND. THX SPATIAL AUDIO ENHANCES STEREO AND SURROUND SOUND TO DELIVER NEXT-GENERATION AUDIO THAT INTENSIFIES 3D SOUNDSCAPES IN ALL FORMS OF ENTERTAINMENT. About THX Amplifier: THX ACHROMATIC AUDIO AMPLIFIER, World’s Most Linear Amplifier Technology for Headphones and In-Vehicle Audio Systems. THX Achromatic Audio Amplifier (THX AAA™) ensures the ultimate no-compromise headphone audio experience by delivering the world’s highest fidelity audio with infinitesimally low levels of noise, distortion and power consumption. THX AAA Features: Patented feed-forward error correction topology that nulls conventional distortion mechanisms, Reduction of harmonic, intermodulation, and crossover distortion by up to 40dB, resulting in a realistic and fatigue-free listening experience, Enables maximum output power for greater dynamic range and sound pressure level (SPL), A convenient modular solution which includes power supply, and can operate from a single 3.6V battery, Minimal bias current and highly efficient power management to optimize and extend device battery life, Scalability that allows incorporation into any headphone or in-vehicle amplifier design, with the flexibility to match the required fidelity, output power, and price point, THX DISTRIBUTED BASS™ Deep Balanced Bass In Any Seat Distributed Bass is a DSP and measurement based low-frequency optimization process designed to normalize bass levels for in any vehicle seating position. The technology leverages specialized sound processing in the DSP or amplifier to determine the optimum EQ and combine the output from door-mounted woofers into an accurate, uniform bass experience through the entire vehicle. THX Distributed Bass Features Even bass distribution to listeners in all seating positions Deep and accurate bass reproduction throughout the vehicle with or without a dedicated subwoofer enclosure. THX LOUDNESS PLUS™ Balanced Sound At Any Volume.THX Loudness Plus maintains the integrity of soundtracks when listening below Reference Level (0 db on the volume dial for THX Certified Receivers. For more information, visit thx.com and razer.com Bonus: Auro 3D is the only immersive sound format that can reproduce a 3D space in Hi-Res Audio (like 96kHz) in all channels, while the Atmos/DTS: X can only do the height channels in 48kHz. This may be significant to music, less to movies Pls support me by a sub, that would be much appreciated 😄

I haven't been able to test DTS: X on Windows 10 yet, but using Dolby Atmos as my spatial audio has been truly amazing. The level at which it has enhanced my gaming experience is unbelievable and I will never go back to stereo again. Dolby on Windows is not perfect though, every so often it will cause my speakers to emit an awful shrill sound, which is easily remedied by switching to stereo and then back to Atmos again. This problem was very prevalent for me last year, but has improved itself tremendously since then (with recent Windows updates). Now it hardly ever happens anymore. Another Windows-based issue I am having with Atmos is my GeForce game recordings occasionally not having any sound or having certain sound effects muffled (I particularly notice this in my Halo Infinite clips). I have an easy workaround for it, but often times I'll forget to do it and will end up with a lot of recordings with no audio, which is really frustrating. But overall, Atmos sounds fantastic and I experience zero audio issues while in-game. Just recently, I noticed the DTS:X Ultra codec is finally available for me to use on Windows 10, so I am super excited to try it! When I upgraded to Windows 11 (I recently downgraded back to Windows 10) I was able to use DTS: X and was very impressed by it. Both companies are awesome and I really don't think you can go wrong with using either of them. In conclusion, with my two years of owning a 7.1 home theater system, I have found Dolby Atmos to be the most compatible with my hardware (by far) -- i.e. my Samsung Galaxy phone, Nvidia Shield, Windows, Blu-Rays, PlayStation4/Xbox One, and a few others. The only chance I get to really compare DTS and Dolby is while watching movies or listening to music. I am no audio expert, but I felt like Dolby Atmos sounded a bit more powerful and a tad fuller, but DTS: X sounded much more natural and realistic, I particularly like using DTS: X for music and using Dolby Atmos for movies and gaming.

in my years of trying both systems in headsets and speakers my conclusion is dts is noticeably better on headset and dolby sounds just a little better on a speaker setup however its harder to setup and more expensive and dts is more flexible so i would personalt go for dts for both

For anyone who wants to know the song that plays in the background it's [Be Right There - by oomie]

Most of the IMAX THEATRE across the world preferred dts : X sound for dynamic earth shattering lmmersive experience.

In theory (and from how the demos sound) Dolby Atmos is amazing. In practice, I don't really notice the difference. I had ceiling mount front and rear speakers for my 5.1 setup due to space, room design, and budget, but then added two big floor speakers to the front (changing the old fronts to front height). I got into Atmos from just upgrading my front speakers, as my receiver already supported it. Even at my relatively low cost of entry, I'm not sure it was a good value. If you're feeling the Atmos itch, I'd suggest trying to experience it for yourself first... before spending a lot of money.

DTS:X Hands-down winner for music and audio mixing! 👍

DTS-X ❤ Am I the only one that hears the difference? Have switched my buying to DTS and DTS-X movies only! Listening to Dolby ATMOS is like listening with a pillowcase over my head.

5:39 It was HD-DVD vs Blu-ray. Not, DVD. In fact, DVDs are still being produced.

I prefer DTS for headphones also. Amazing experience

I just got the Samsung HW-N950 Soundbar system....has 17 total speakers...with 2 rear satellite speakers that have outward and upward firing speakers and the 48" soundbar has 2 upward firing speakers as well to create a 7.1.4 setup.... SOUNDS AMAZING!!!!....Easy wireless setup....each speaker only needs power... Highly recommend if looking for great sound and easy setup as he mentioned in video!!!

DTS X is absolutely phenomenal on 4k Blu-Ray and exceeded the quality of Dolby Atmos considerably! This is what I got from the Incredible Hulk (2008). It was a pure WOW! I also liked Lightyear from Disney Plus streaming Dolby Atmos but I don’t like having to cast it from iPhone instead of using the app on the television due to lack of Dolby Atmos support in the latest Disney Plus update with Sony Bravia !

I find DTS to be a bit louder and more abrasive. I usually prefer DTS to Dolby though.

You guys need to remember that although a movie may be coded for DTS or for Atmos.. It is still one stream of directional audio. Which is then played through an encoder (Atmos or DTS) which decides what to do with the audio. From experience some Atmos encoded films, can sound better on DTS and some DTS encoded films can sound better on Atmos. It all depends on how they're using that directional audio data stream. I actually came here because i'm using both with headphones for gaming on a PC. Now the same goes for games, however all game producers use the same Windows Directional Audio encoder. Which means that using Atmos or DTS is subjective and down to personal preference. I have found that Atmos is very much on top of you, its loud and in your face, Its "spacious" is only about 2ft away from your skull. Now with DTS they have a "spacious" option... which turns that 2ft of audio into about 10ft giving you much more awareness of directional audio in games, Footsteps and bullets being the main one.

I don’t know but lately I’ve been paying serious attention to these sound formats and it seems like DTS X is more full filling than DOLBY ATMOS. It sounds as if there is a lot more immersive sound. Hell it also seems like overhead sound is moré prevalent. I don’t know. And I’m using a Dolby Atmos bar. Don’t get me wrong they both sound good but DTS X movies sound a lot better

Both are great and for me with my simple 5.1 setup DTS X would be better for my setup. But again both are great and it's up to the movie makers to mix the movies as best they can. But Dolby is the clear winner, they are pushing alot of money to have their format be the number 1 and it shows in how many movies are Dolby mixed

I recently bought dts virtual x samsung surround sound, but it doesn’t really sound surround, specifically the top speaker effect. Also the dialogs are not very clear. Is my sound bar arrangement incorrect. Also, the rear speaker are kind of myth, it is barely audible

Basically it comes down to personal listening preference. I switch between Dolby and dts depending on what I'm watching. Some movies sound better on Dolby than dts and vice versa.

4K Ultra HD Blu ray disc should have both encoded in the disc.

I like DTS, sound and bass so loud and so clear

but which one would be better to purchase for headphone use in pc from the Microsoft store ?

i dont always watch many shows with planes taking off and landing...but when i do i can hear it in Dolby Atmos

Having just performed a side by side comparison of Dolby DD and DTS 5.1 using a PS4, Hitman 2 and HDMI in through an Onkyo receiver I found Dolby brighter and DTS richer. The use of forced on DTS virtual X added the sound field immencely. I can't stress enough how raising all speakers to head height or above adds to the over head effect and general dispersion of the virtualised speaker sound field! Another reason DTS X is superior to Atmos is the ability to force DTS X (backwards compatibility) on as Atmos is automatic only!

I am using the Xbox Wireless Headset for my Xbox Series X and I prefer DTX for non-Dolby games/shows/movies and Dolby Atmos for movies/shows/games that are coded for Atmos.

Just a note: object based surround sound existed in video games since the early 2000s

To help some of the fellas out there, in my taste (with a high end $2500 avr 5.2.4 setup) I find that every time DTS:X is the format, it always sound fantastic and amazing, no matter how old the content is. Atmos is realy unconsistent even if it's labeled as "atmos format", most of the times it's mediocre, sometimes quite bad, and in few titles it has been amazing, "our planet" on Netflix for an example. To round it up: Atmos mostly sound mediocre unless it's Real atmos content which is quite rare(I watch movies/series every day) DTS:X never goes wrong and will always give you an amazing experience (atleast the content I've seen) Last but not least, if you want the topspeakers to come alive, dts x is definitely your choice, but don't forget to turn up the volume abit on the top speakers, no matter which format you use.

I like Dolby Atmos better overall. If I’m watching something that’s mastered in 5.1 format, then I prefer DTS X to upmix it. DTS just seems to upmix better IMO.

Which is best for gaming in headphones?

On my Samsung Q90R Soundbar the Atmos sounds way louder and punchier than DTS:X, tried quite a few 4k UHD blu-rays of both format and the result always shows the same. I needed to turn up the volume 3-4 points in DTS:X just to match Dolby Atmos.

Thought I had it going on. Bragged my home theater sounded better than most theaters. Until I saw Angel Has Fallen in Atmos. So now I'm totally upgrading. Onkyo reciever, dual 12' subs, and upper speakers

You should include Auro 3D, very popular format in Europe. Auro 2D upmixer sounds fantastic, much better then Dolby and DTS-X counterparts.

i have a 7.1.4 setup and my experience with it so far is great but not fantastic. sometimes it is fixed in wich speaker the audio comes from and sometimes it is really object based audio, much depends on the ''mixers'' capability. the same for the low, sometimes it is deep and sometimes flat. there is not really a standard on wich these new setups have to fulfill. i thought with these new formats problems from older soundtracks would be fixed when they recreated them in atmos or dts:x.

Love my Sony HT-ST5000, both formats sound very realistic and immersive!!

4:48 As to my knowledge, there was a format war between BluRay vs HD DVD, not DVD.

It's pronounced Dolby "At-mows" not "At-mis"

Dolby is more popular, but popular does not mean better. In my opinion DTS has always been superior since the very beginning.

I didnt think it mattered UNTIL I watched 'The Ring' back in the day. I had been watching the Dolby sound track and once day noticed in the sound options the DTS track and thought, why not and off I went. I noticed IMMEDIATELY a huge difference between the two. Dolby had a lot of echo and noise, that white noise sound, and was crackly, oh but not DTS. DTS sounded like the difference between a live performance of a band or artist versus a studio recording. DTS had no noise or static, it sounded like it was recorded in a noise dampered studio room. I couldnt believe how clear the opening scene to 'The Ring' sounded with all that rain falling. I also LOVE watching Se7en with its DTS track over its Dolby for the same reason and finally, Batman and Batman Returns on the original DVD with DTS option, my movie collection will always keep that option there versus the bluray and UHD version for that reason alone. They may say its all preference. Ive since lost hearing in my left ear so I cant enjoy surround like I once did, but my preference is ALWAYS going to be DTS and like he said, DTS will always make it simple for you. My home theater and walls have always had and will always continue to have a DTS poster on the wall, DTS is the way to go, and its less expensive. Superior sound that overall costs less? Now you know who your real friends are. Its like supporting Microsoft or supporting Sony

I only have a simple z5500 that has optic imput for digital 5.1 and DTS. DTS sounds always better than Dolby.

Since this is the most viewed video of this topic I'll leave this here DTS X IS THE WINNER sound is much wider you'll hear more details like a basketball bouncing fading away from one of the speakers and the bass in more refined it feels clear Its more IMMERSIVE more controllable Dolby Atmos Is really good because it's louder as it uses more compressions than DTS which is bad cause you loose some details the bass is boomy alot of rumble so is perfect for action stuff thats why is more popular in Cinema Sound basically comes from everywhere you feel surrounded Extra: Linear pcm is the OG it's uncompressed which mean every detail is conserved but its not that loud and unfortunately it doesn't have upfiring speaker So as you see nothing is perfect everything has its downsides so it really is up to you what you prefer

DTS:X is not very widespread. DTS missed the whole Streaming market and came late to Gaming. While Atmos has been available for Gaming natively on Windows and Xbox for two years now, DTS is now just starting on Windows 10 and has plans to launch on Xbox in the future. But it's especially unfortunate, that DTS is not on Netflix, Amazon Video, iTunes, Hulu, Vudu, Disney+ or any other Streaming Service I know about. With the extinction of physical media quickly approaching, that's a very bad situation for DTS to be in...

Bro, your music is way too loud and distracting. Your voice should be the top priority, but other than that it was a great video

So wait, I do not want to sound like an idiot or anything but I am trying to learn to the best of my ability. If I have like a 5.1 system connected with an optical to the bluray player, and the movie and the player supports dts, is that considered dts with a 5.1?

I haven’t seen both sound mix’s on the same disc,. But when comparing the two on multiple different films I have found DTS:X more accurately reproducing sound effects and 3D immersion than Dolby atmos. Objects sonically appear exactly where they should be in regard to what I’m seeing on my display. And DTS is and has always been mastered louder than Dolby.

_Back in the days before Blu-ray DTS sounded better because of its higher bit rate, but today they’re flexibility takes number one just like you said_

Is one of these better for just playing back music? Or would you not want to use something like DTS or Atmos for playing back music?

i have a lx53 for quite a long time now. lately i noted sonething against my belief. i was listening to surround sound with more detail and texture to every sound and when i checked the format it was playing - it was in stereo mode which i could not believe, caz i heard the sounds moving around . i rewinded the scene and checked again and the sound did move around me in stereo mode - confirmed!!!. with 2 ears we have, everything we percieve moving around us , is just our mind (pro logic) decoding it. so if the recording has been done rightly even with 2 speakers the sound will move around us. and now when manufacturers want to sell more channels - new recievers and more speakers i find it not such an effective or efficient solution. spending more on room accoustics (thick curtains, thick carpets and wooden walls) would be more yielding.

I had listened to both mix and I still think dts-x is better with better clear bass and surround clearly so for me I enjoy watching movies much better in dts-x

How to get the best surround sound experience in Headphones?

I am Getting a sound bar and I don’t know which Sandbar is the best value for your money Because IJust got a new tv Panasonic 4K too and I’m just wondering what’s a really good sound bar for it thank you I hope you have a great day?

I'm running 5.2.4 with 4 wall mounted height channels close to the ceiling. I don't have much experience with Dts-X as I simply don't have much content with that format right now. I have more content with Dolby Atmos, Dolby Audio or Dolby Digital. From what I understand, all of those can be output as Dolby Atmos via your Atmos-capable receiver. At least that's what I've read. I also use DTS-Neural X quite a bit as it upsamples non-Atmos and non-Dts-x content to simulate Dts-x. I find that Atmos in certain scenes is awesome, but only in certain scenes. I feel like Neural-X throws more content to your height channels throughout the length of your movie or show than Atmos does, which to me is great. I personally feel like I get a better experience with Neural-X than Atmos. And I like that it works with old dvds or blu-rays that don't have Atmos/Dts-x. Try Neural X with Lone Survivor and tell me that isn't immersive.

Notice the part where the reviewer states that's there's not much appreciable difference in performance between the two formats, all things considered! Interesting. I personally more appreciate that DTS X and it's flexibility over Dolbys more encapsulated approach, namely the limitations it places, and its drawbacks for home application! (Calling for Rear surrounds to be near ear level behind the listener's, distracting to closer seats!) Ive said this all along, and that's that quality over quantity! DTS X allows the more flexibility and thus more options for better system performance across more variables

I had ever seen the movie "DRAGON HEART" composed sound with dts 6.1 channel. It's amazing sound. DTS 6.1 can create overhead surround sound without height speakers. DTS 6.1 sound is so sharper and clearer than every dolby. DTS 6.1 is very much clearer in the sound position. It's so immersive, especially rainy scenes, dragon flying overhead, and the plane or helicopter ( for other movies). I really love dts 6.1 and the best format SDDS 7.1. Do not understand why Sony company does not dedicate SDDS to consumer home theater.

The easter egg dude at 1:35 freaked me out LOL

What is specifically best to use, when using Bang & Olufsen Beoplay headphones, on my Xbox series x. And mainly for the game: Rainbow Six Siege Reason I am asking, is because I want the absolute best sound setup when I start competitive play with that game. All hel is welcome! 🤗

Tbh in theory atmos sounds amazing! And once u hear the demo disc u will be blown away. But that's where it ends.... 90% of the movies have a very poor atmos implementation! Overheard effects? Forget it! U might get one or two moments in a movie where you can distinctively hear an overhead effect. Otherwise it is used just for ambience sounds. Makes u wonder why can't movies have the same sound mix like dolby atmos demo disc? I can only think of a handful of movies that really wowed me with their atmos effects. And I have a full atmos system with 4 overheard speakers. It just seems the sound engineers are too lazy to spend time and effort.

Regardless of the the two formats it really boils down to the movie director on how they use the height channels. I speak more for atmos as its a far more popular and widespread format. Two examples of using atmos well would be Quite Place and Ready Player One. And hate to say it but them up-firing soundbars are a gimmick that don't really work, give me a 2.1 any-day of the week.

My commen for sound related question which is better Trackor DAW or FL studio make a video on top best mostly used DAW software!!!! For DJing

Please do a video for dts: x and dts: virtual x....does having one mean you have the other?

I prefer DTS, DTS has a higher bit rate and clear a sound, well Dolby gives you the effect that the movie is happening in your room, DTS gives you the affect that you were there

I love DTS X especially with its working with my 5.1 set up.

Past 20 years? At the end of the 1990s there was the Aureal Vortex A3D sound card which could do spatial audio, including heights for games supported. That technology was amazing. It already was object-based, and could do realtime sound occlusion and reverb. What we see today is that finally Hollywood catched up with a 25-year tech. Dolby is a patent-troll company just like Creative (who drove Aureal into banckrupcy with patent-trolling and fiested on its stuff).

I love DTSx on Windows. Much better height separation and I can hear every instrument in the song. For gaming, most use Dolby Atmos and while not perfect, it is better than standard stereo. I wish my Samsung phone had DTS virtual X over Dolby Atmos that the fruit company popularised

Uh, what? Atmos is on WAY more releases than DTS:X. Early object audio compatible products didn't even feature DTS:X, although some added it in firmware updates. I'd say maybe one out of ten home releases features DTS:X versus Dolby Atmos.

Got Logitech G432 that support DTS:X 2.0 7.1 Surround and it feels really good for the headphones price, by your explaining at beginning about how DTS and Dolby work it sounds like DTS can be better for headphones, DTS:X 2.0 make the cinema feeling during gaming, bass, sound quality everythink feels like you really have 7.1 speakers with insane bass like cinema do.

This just doesn't matter because both formats are on all the hardware options just like past audio formats. But there are far more Atmos films being released on Blu Ray

Great video!!One thing I don’t understand. I’m thinking about buying a lg soundbar that is DTS X not Dolby atmos. But it’s for the audio format it’s doubly digital, and DTS digital surround sounds. And I just heard that Amazon Prime, Netflix and another streaming site doesn’t support DTS. I HAVE No IDEA WHAT THAT MEANS.. I am assuming if I were to buy that would that mean the quality of the sound from my soundbar won’t be good? Or as good ? Do you or anyone know? Or since it’s dolly digital it might still work..? Does anyone happen to know? Thank you

Consumer DTS: X is, simply put, a channel based format that is encoded as 7.1.4 (standard) or 7.1.5 (IMAX Enhanced). You can mix soundtracks with objects, but you can no longer output a DTS: X soundtrack with objects. You have a choice of 11.1 or 12.1. DTS: X PRO adds matrix extraction and upmixing techniques to expand these fixed tracks to 32 speaker locations, but again, it's not discrete audio information. Consumer Dolby Atmos tracks, when encoded correctly (something Disney rarely does), can scale from 5.1.2 all the way to 24.1.10 with a combination of channels and 3D objects.

So if I was to get a cell phone to listen to music which of the 2 sound formats would be better to have installed on the phone? I wonder though if both dolby atmos and dts:x could be combined together by taking the best parts of both sound formats to create a universal sound format that can be used for music enhancement, movie production and multisound mixes etc.

Can Logitech G935 headset/headphone run Dolby Atmos using Dolby Access software from Windows Store? If yes, is it fully compatible with Dolby Atmos? will I get the full experience? and are there differences between using DTS:X from Logitech G935 software and DTS Sound Unbound software from Windows Store? which one is better?

Dts X headphone is far better than Dolby Headphone, it add details, improve bass and preserve directionally of stereo sources.

I tend to have DTS Virtual :X, DTS Neutral:X, what is the difference? Please explain.

Object-based surround sound has been out on PC since the beginning of the 2000s. Creative Labs EAX.

Based upon my personal experience, DTS used to be better sounding than Dolby Digital. Now Dolby Atmos is way better than DTS:X in my opinion. Most of DTS:X soundtrack sound compressed to me. Atmos is way more dynamic and bass more punchy. The surround effect is quite close between the two formats though.

I have both. DTS-X bestest! ❤

Dts x is not free on windows.

Thank you for this very informative clip. I have a QQ: if I watch a Blu Ray in Dolby Atmos, and then watch the same Blu Ray in DTS X, am I listening to two different sound mixes?

DTS is great if you only buy/rent physical movies, but, as far as I can tell, nobody streams DTS X. And since streaming seems to be the way that most consumers, unfortunately, are heading, I can't see DTS being around for much longer, other than in theaters.

i feel dts digs deep in the height channels - atmos is subtle

auro 3d is also emerging review about that format

There is an error in this video. DTS:X uses metadata for 3D object based sound as Atmos and needs height channels. DTS Virtual:X doesn't need heights...

Please do a Review on AURO 11.1 ; the first immersive 3D Sound Format.

hey bro... i have a logitech g430 7.1 headset.. i just noticed today that there were these 2 formats ... so idecided tro check out your channel for much information... i am still confused whether to choose the DOLBY surround sound or the DTS : X format... i can choose these 2 .. which one do you think is the best for gaming.. id ont need a lot of sound thoguh i just ned pin point accuracy of enemy gunfire and footsteps.... it would be really great if you could naswer me... and i really liked your video with all these demonstartions and alot of clips .... GOOD ONE!!!

My surround system is full Dolby Atmos supported and plays DTS: X

DVD movie U571 in DTS. Holy cow what an experience that was! DVD's back then were mostly Dolby Digital with a bitrate of 384kpbs. U571 was in DTS at 1500+ kbps. Amazing clear sound. On the PS3 you could see in the top of the screen all the technical specs for video and sound when you pressed Select on the controller.

I ❤️ DTS X ULTRA BECAUSE IT SUPPORTS LOSSLESS AUDIO 🔥🔥🔥

So how to determine which immersive audio system a PC AAA game (Say the Shadow of the Tomb Raider Definitive Edition) is using?

Watch netflix altered carbon in dolby atmos sounds so awesome you can random person talking behind the main characters like you would in real life .

I don’t know if you know the answer to this, but how can you tell if an Xbox series X game supports Dolby Atmos? (I have an Atmos headset)

3:46 Yes. Can you please clarify about this audio issue I'm having?

have you heard the Smyth A16.... it has 24 channels of Atmos..... I use it for 12.1.10 Dolby Atmos.... thats 24 speakers of your choice and the 12.1.10 config is for 10 overhead speakers.... it sounds amazing...

Im using logitech G633 headphones via USB , it detect as 7.1 native devices on pc then it convert the full surround into Dts Headphone:X, and its amazing realistic surround conversion cause its not a fake stereo to surround effect, im really happy with it, what i want to ask is, does dolby atmos headphone or dts connect from windows store provide better surround quality vs my build in ones?

Dolby Atmos is far superior in object placement and sound levels and quality. DTS has always been to loud for music and effects making vocals hard to hear without increasing the vocal channel for every DTS movie.

Do a video on Herman speaker and DTS x speaker

While researching Video edit programs that were able to edit Do;by 5.1 surround sound (Premiere dumped it) I researching 5.1 surround Headset came across a number of other Dolby Atmos videos and one said that one only needed a stereo head set to here dolby atmos encoded videos after activating Dolby Atmos in Windows 10 build 1909 and later ... can you elaborate on this? Also is a Dolby Atmos sound bar really a substitute for real ceiling speakers?

Which is better for stereo gaming headphones especially for fps, dts x or dolby atmos?

I recently purchase dts x sound unbound and it is much better than dolby atmos.

Who's better dts hd or Dolby Atmos or Dolby audio?!